Characterization and Evaluation of Materials.
Overview
Works: | 909 works in 794 publications in 794 languages |
---|
Titles
Complex Inorganic Solids = Structural, Stability, and Magnetic Properties of Alloys /
by:
(Language materials, printed)
Advanced Computer Simulation Approaches for Soft Matter Sciences.. I
by:
(Language materials, printed)
Advanced Computer Simulation Approaches for Soft Matter Sciences.. II
by:
(Language materials, printed)
Self-Consistent Methods for Composites. Vol. 2. Wave Propagation in Heterogeneous Materials /
by:
(Language materials, printed)
Polymer Engineering Science and Viscoelasticity = An Introduction /
by:
(Language materials, printed)
Structures Under Crash and Impact = Continuum Mechanics, Discretization and Experimental Characterization /
by:
(Language materials, printed)
Analysis of Failure in Fiber Polymer Laminates = The Theory of Alfred Puck /
by:
(Language materials, printed)
Chromatography for sustainable polymeric materials = renewable, degradable and recycable /
by:
(Language materials, printed)
Polymer Surfaces and Interfaces = Characterization, Modification and Applications /
by:
(Language materials, printed)
Advanced Materials and Structures for Extreme Operating Conditions
by:
(Language materials, printed)
Standardization and Quality Assurance in Fluorescence Measurements II = Bioanalytical and Biomedical Applications /
by:
(Language materials, printed)
Standardization and Quality Assurance in Fluorescence Measurements I = Techniques /
by:
(Language materials, printed)
Narrow gap semiconductors 2007 = proceedings of the 13th International Conference, 8-12 July, 2007, Guildford, UK /
by:
(Language materials, printed)
Fundamentals of powder diffraction and structural characterization of materials
by:
(Language materials, printed)
Microarrays = preparation,microfluidics, detection methods, and biological applications /
by:
(Language materials, printed)
IUTAM Symposium on Modelling Nanomaterials and Nanosystems = proceedings of the IUTAM symposium held in Aalborg, Denmark, 19-22 May 2008 /
by:
(Language materials, printed)
Three-dimensional free-radical polymerization = cross-linked and hyper-branched polymers /
by:
(Language materials, printed)
IUTAM symposium on mechanical properties of cellular materials = proceedings of the IUTAM Symposium on Mechanical Properties of Cellular Materials, held September 17-20, 2007, LMT-Cachan, Cachan, France/
by:
(Language materials, printed)
Handbook of sample preparation for scanning electron microscopy and x-ray microanalysis
by:
(Language materials, printed)
Functional thin films and nanostructures for sensors = synthesis, physics and applications /
by:
(Language materials, printed)
Neutron imaging and applications = a reference for the imaging community /
by:
(Language materials, printed)
Image correlation for shape, motion and deformation measurements = basic concepts, theory and applications /
by:
(Language materials, printed)
Electroanalytical methods = guide to experiments and applications /
by:
(Language materials, printed)
Micromechanisms of fracture and fatigue = in a multiscale context /
by:
(Language materials, printed)
Sample preparation handbook for transmission electron microscopy = techniques /
by:
(Language materials, printed)
Sample preparation handbook for transmission electron microscopy = methodology /
by:
(Language materials, printed)
Lock-in thermography = basics and use for evaluating electronic devices and materials /
by:
(Language materials, printed)
Rapid production of micro- and nano-particles using supercritical water
by:
(Language materials, printed)
Materials with complex behaviour = modelling, simulation, testing, and applications /
by:
(Language materials, printed)
High frequency acoustics in colloid-based meso- and nanostructures by spontaneous brillouin light scattering
by:
(Language materials, printed)
Nanoscience = the science of the small in physics, engineering, chemistry, biology and medicine /
by:
(Language materials, printed)
Characterization and design of zeolite catalysts = solid acidity, shape selectivity and loading properties /
by:
(Language materials, printed)
Mossbauer spectroscopy and transition metal chemistry = fundamentals and application /
by:
(Electronic resources)
Quantifying the evolution of early life = numerical approaches to the evaluation of fossils and ancient ecosystems /
by:
(Electronic resources)
Safety of VVER-440 reactors = barriers against fission products release /
by:
(Electronic resources)
X-Ray diffraction crystallography = introduction, examples and solved problems /
by:
(Electronic resources)
Fabrication and characterization in the micro-nano range = new trends for two and three dimensional structures /
by:
(Electronic resources)
Factors affecting the removal of ammonia from air on carbonaceous materials = investigation of reactive adsorption mechanism /
by:
(Electronic resources)
Proceedings of the 10th International Congress for Applied Mineralogy (ICAM)
by:
(Electronic resources)
Thermo-hydrodynamic design of fluidized bed combustors = estimating metal wastage /
by:
(Electronic resources)
Generalized continua and dislocation theory = theoretical concepts, computational methods and experimental verification /
by:
(Electronic resources)
Bio and nano packaging techniques for electron devices = advances in electronic device packaging /
by:
(Electronic resources)
Atomistic and continuum modeling of nanocrystalline materials = deformation mechanisms and scale transition /
by:
(Electronic resources)
Plasticity and beyond = microstructures, crystal-plasticity and phase transitions /
by:
(Electronic resources)
Theoretical concepts of x-ray nanoscale analysis = theory and applications /
by:
(Electronic resources)
8th Congress on Electronic Structure: Principles and Applications (ESPA 2012) = a conference selection from theoretical chemistry accounts /
by:
(Electronic resources)
The Development of a 2D Ultrasonic Array Inspection for Single Crystal Turbine Blades
by:
(Electronic resources)
Growth mechanisms and novel properties of silicon nanostructures from quantum-mechanical calculations
by:
(Electronic resources)
Rheed transmission mode and pole figures = thin film and nanostructure texture analysis /
by:
(Electronic resources)
Constitutive relations under impact loadings = experiments, theoretical and numerical aspects /
by:
(Electronic resources)
Micro-scaled products development via microforming = deformation behaviours, processes, tooling and its realization /
by:
(Electronic resources)
Failure analysis = fundamentals and applications in mechanical components /
by:
(Electronic resources)
Transport of energetic electrons in solids = computer simulation with applications to materials analysis and characterization /
by:
(Electronic resources)
Theoretical and experimental studies on non-fourier heat conduction based on thermomass theory
by:
(Electronic resources)
LACAME 2012 = proceedings of the 13th Latin American Conference on the Applications of the Mossbauer Effect, (LACAME 2012) held in Medellin, Colombia, November 11-16, 2012 /
by:
(Electronic resources)
Terahertz and mid infrared radiation = etection of explosives and CBRN (using terahertz) /
by:
(Electronic resources)
Solder joint reliability assessment = finite element simulation methodology /
by:
(Electronic resources)
Consequences of combinatorial studies of positive electrodes for Li-ion batteries
by:
(Electronic resources)
In-situ materials characterization = across spatial and temporal scales /
by:
(Electronic resources)
Electric-field control of magnetization and electronic transport in ferromagnetic/ferroelectric heterostructures
by:
(Electronic resources)
ISAC and ARIEL = the TRIUMF radioactive beam facilities and the scientific program /
by:
(Electronic resources)
Ultra-high Temperature Materials.. I,. Carbon (graphene/graphite) and refractory metals
by:
(Electronic resources)
Imaging with electromagnetic spectrum = applications in food and agriculture /
by:
(Electronic resources)
In-situ structure characterization of elastomers during deformation and fracture
by:
(Electronic resources)
Phenomena and computational models of non-proportional fatigue of materials
by:
(Electronic resources)
Mathematical and computational analyses of cracking formation = fracture morphology and its evolution in engineering materials and structures /
by:
(Electronic resources)
Roadmap to sustainable textiles and clothing = eco-friendly raw materials, technologies, and processing methods /
by:
(Electronic resources)
Elasto-plasticity of frame structure elements = modeling and simulation of rods and beams /
by:
(Electronic resources)
Trends in nanoscale mechanics = mechanics of carbon nanotubes, graphene, nanocomposites and molecular dynamics /
by:
(Electronic resources)
Proceedings of the 11th European Conference on Thermoelectrics = ECT 2013 /
by:
(Electronic resources)
Materials challenges and testing for manufacturing, mobility, biomedical applications and climate
by:
(Electronic resources)
Analysis of fracture toughness mechanism in ultra-fine-grained steels = the effect of the treatment developed in NIMS /
by:
(Electronic resources)
Proceedings of the International Colloquium in Textile Engineering, Fashion, Apparel and Design 2014 (ICTEFAD 2014)
by:
(Electronic resources)
Detection of chemical, biological, radiological and nuclear agents for the prevention of terrorism = mass spectrometry and allied topics /
by:
(Electronic resources)
Functional materials in amperometric sensing = polymeric, inorganic, and nanocomposite materials for modified electrodes /
by:
(Electronic resources)
Advances in gamma ray resonant scattering and absorption = long-lived isomeric nuclear states /
by:
(Electronic resources)
Electrochemistry of immobilized particles and droplets = experiments with three-phase electrodes /
by:
(Electronic resources)
Photocatalytic semiconductors = synthesis, characterization, and environmental applications /
by:
(Electronic resources)
Deformation and fracture of solid-state materials = field theoretical approach and engineering applications /
by:
(Electronic resources)
High-resolution extreme ultraviolet microscopy = imaging of artificial and biological specimens with laser-driven ultrafast XUV sources /
by:
(Electronic resources)
Metal matrix composites = synthesis, wear characteristics, machinability study of MMC brake drum /
by:
(Electronic resources)
Challenges in mechanics of time-dependent materials. = Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 2
by:
(Electronic resources)
Experimental and applied mechanics. = proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 6
by:
(Electronic resources)
Composite, hybrid, and multifunctional materials. = proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 4
by:
(Electronic resources)
Dynamic behavior of materials. = proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
Biaxial testing for fabrics and foils = optimizing devices and procedures /
by:
(Electronic resources)
Ultrafast phenomena XIX = proceedings of the 19th International Conference, Okinawa Convention Center, Okinawa, Japan, July 7-11, 2014 /
by:
(Electronic resources)
Dynamics of pre-strained bi-material elastic systems = linearized three-dimensional approach /
by:
(Electronic resources)
Inelastic behavior of materials and structures under monotonic and cyclic loading
by:
(Electronic resources)
Experimental stress analysis for materials and structures = stress analysis models for developing design methodologies /
by:
(Electronic resources)
Mechanics of advanced materials = analysis of properties and performance /
by:
(Electronic resources)
Technological aspects of manufacturing and numerical modelling of clinch-adhesive joints
by:
(Electronic resources)
2nd International Multidisciplinary Microscopy and Microanalysis Congress = proceedings of InterM, October 16-19, 2014 /
by:
(Electronic resources)
From creep damage mechanics to homogenization methods = a Liber Amicorum to celebrate the birthday of Nobutada Ohno /
by:
(Language materials, printed)
Zeolites in sustainable chemistry = synthesis, characterization and catalytic applications /
by:
(Electronic resources)
Materials with internal structure = multiscale and multifield modeling and simulation /
by:
(Electronic resources)
Fracture, fatigue, failure, and damage evolution. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 8
by:
(Electronic resources)
Mechanics of composite and multifunctional materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 7
by:
(Electronic resources)
Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 9
by:
(Electronic resources)
Challenges in mechanics of time dependent materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 2
by:
(Electronic resources)
Advancement of optical methods in experimental mechanics. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 3
by:
(Electronic resources)
Experimental and applied mechanics. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 4
by:
(Electronic resources)
Dynamic behavior of materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
Investigations on microstructure and mechanical properties of the Cu/Pb-free solder joint interfaces
by:
(Electronic resources)
Synthesis and optimization of chalcogenides quantum dots thermoelectric materials
by:
(Electronic resources)
The finite element analysis program MSC Marc/Mentat = a first introduction /
by:
(Electronic resources)
Neutron scattering and other nuclear techniques for hydrogen in materials
by:
(Electronic resources)
Fundamentals of ultrasonic nondestructive evaluation = a modeling approach /
by:
(Electronic resources)
Growth and form of self-organized branched crystal pattern in nonlinear chemical system
by:
(Electronic resources)
Nonlinear dynamics. = proceedings of the 34th IMAC, a Conference and Exposition on Structural Dynamics 2016 /. Volume 1
by:
(Electronic resources)
Loadings in thermal barrier coatings of jet engine turbine blades = an experimental research and numerical modeling /
by:
(Electronic resources)
Surface modifications and growth of titanium dioxide for photo-electrochemical water splitting
by:
(Electronic resources)
Computational modeling, optimization and manufacturing simulation of advanced engineering materials
by:
(Electronic resources)
Physical principles of electron microscopy = an introduction to TEM, SEM, and AEM /
by:
(Electronic resources)
Supported layered double hydroxides as CO2 adsorbents for sorption-enhanced H2 production
by:
(Electronic resources)
Transmission electron microscopy = diffraction, imaging, and spectrometry /
by:
(Electronic resources)
Handbook of maleic anhydride based materials = syntheses, properties and applications /
by:
(Electronic resources)
The roles of accelerated pavement testing in pavement sustainability = engineering, environment, and economics /
by:
(Electronic resources)
3D MS = proceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France /
by:
(Electronic resources)
TMS 2015 = 144th Annual Meeting & Exhibition : supplemental proceedings /
by:
(Electronic resources)
Rare metal technology 2015 = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA /
by:
(Electronic resources)
Essential readings in light metals.. Volume 4,. Electrode technology for aluminum production
by:
(Electronic resources)
Essential readings in light metals.. Volume 3,. Cast shop for aluminum production
by:
(Electronic resources)
TMS 2014 = 143rd Annual Meeting & Exhibition : Annual meeting supplemental proceedings /
by:
(Electronic resources)
TMS 2016 = 145th Annual Meeting & Exhibition : supplemental proceedings /
by:
(Electronic resources)
Proceedings of the 1st International Conference on 3D Materials Science = held July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA /
by:
(Electronic resources)
ICAA13 Pittsburgh = proceedings of the 13th International Conference on Aluminum Alloys /
by:
(Electronic resources)
Essential readings in light metals.. Volume 2,. Aluminum reduction technology
by:
(Electronic resources)
Energy Materials 2014 = conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China /
by:
(Electronic resources)
HSLA steels 2015, microalloying 2015 & offshore engineering steels 2015 = conference proceedings, held November 11-13th, 2015, Hangzhou, Zhejiang Province, China /
by:
(Electronic resources)
Applied mechanics, behavior of materials, and engineering systems = selected contributions to the 5th Algerian Congress of Mechanics, CAM2015, El-Oued, Algeria, October 25 - 29 /
by:
(Electronic resources)
Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2
by:
(Electronic resources)
Advancement of optical methods in experimental mechanics. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 3
by:
(Electronic resources)
Experimental and applied mechanics. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 4
by:
(Electronic resources)
Fracture, fatigue, failure and damage evolution. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 8
by:
(Electronic resources)
Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 9
by:
(Electronic resources)
Advanced transmission electron microscopy = imaging and diffraction in nanoscience /
by:
(Electronic resources)
Emerging challenges for experimental mechanics in energy and environmental applications = proceedings of the 5th International Symposium on Experimental Mechanics and 9th Symposium on Optics in Industry (ISEM-SOI), 2015 /
by:
(Electronic resources)
Dynamic behavior of materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
A concise introduction to elastic solids = an overview of the mechanics of elastic materials and structures /
by:
(Electronic resources)
Computational reality = solving nonlinear and coupled problems in continuum mechanics /
by:
(Electronic resources)
Electromagnetic acoustic transducers = noncontacting ultrasonic measurements using EMATs /
by:
(Electronic resources)
The structural integrity of carbon fiber composites = fifty years of progress and achievement of the science, development, and applications /
by:
(Electronic resources)
Li-S and Li-O2 batteries with high specific energy = research and development /
by:
(Electronic resources)
Inorganic scintillators for detector systems = physical principles and crystal engineering /
by:
(Electronic resources)
3rd International Multidisciplinary Microscopy and Microanalysis Congress (InterM) = proceedings, Oludeniz, Turkey, 19-23 October 2015 /
by:
(Electronic resources)
Creep behaviour in cracked sections of fibre reinforced concrete = proceedings of the International RILEM Workshop FRC-CREEP 2016 /
by:
(Electronic resources)
Transport of energetic electrons in solids = computer simulation with applications to materials analysis and characterization /
by:
(Electronic resources)
Freezing colloids = observations, principles, control, and use : applications in materials science, life science, earth science, food science, and engineering /
by:
(Electronic resources)
Fe-based bulk metallic glasses = understanding the influence of impurities on glass formation /
by:
(Electronic resources)
Applications of process engineering principles in materials processing, energy and environmental technologies = an EPD symposium in honor of Professor Ramana G. Reddy /
by:
(Electronic resources)
Mechanical and creep behavior of advanced materials = a SMD symposium honoring Professor K. Linga Murty /
by:
(Electronic resources)
Energy technology 2017 = carbon dioxide management and other technologies /
by:
(Electronic resources)
Development of an ultrasonic sensing technique to measure lubricant viscosity in engine journal bearing in-situ
by:
(Electronic resources)
Nanotechnologies for environmental remediation = Applications and Implications /
by:
(Electronic resources)
Advances in shape memory materials = in commemoration of the retirement of Professor Hisaaki Tobushi /
by:
(Electronic resources)
International Digital Imaging Correlation Society = proceedings of the first Annual Conference, 2016 /
by:
(Electronic resources)
Wave dynamics and composite mechanics for microstructured materials and metamaterials
by:
(Electronic resources)
Blends and graft copolymers of cellulosics = toward the design and development of advanced films and fibers /
by:
(Electronic resources)
Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017)
by:
(Electronic resources)
Quantitative infrared spectroscopy for understanding of a condensed matter
by:
(Electronic resources)
Electron nano-imaging = basics of imaging and diffraction for TEM and STEM /
by:
(Electronic resources)
Sensors and instrumentation. = proceedings of the 35th IMAC, a Conference and Exposition on Structural Dynamics 2017 /. Volume 5
by:
(Electronic resources)
On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact
by:
(Electronic resources)
Advances in acoustic emission technology = proceedings of the World Conference on Acoustic Emission-2015 /
by:
(Electronic resources)
Performance assessment of concrete structures and engineered barriers for nuclear applications = conclusions of RILEM TC 226-CNM /
by:
(Electronic resources)
Engineering of scintillation materials and radiation technologies = proceedings of ISMART 2016 /
by:
(Electronic resources)
A framework for durability design with strain-hardening cement-based composites (SHCC) = state-of-the-art report of the RILEM Technical Committee 240-FDS /
by:
(Electronic resources)
Field emission scanning electron microscopy = new perspectives for materials characterization /
by:
(Electronic resources)
Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 8
by:
(Electronic resources)
Wave propagation and diffraction = mathematical methods and applications /
by:
(Electronic resources)
Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications = presented at the XXV International Materials Research Congress - Cancun 2016 /
by:
(Electronic resources)
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors.. Volume 1
by:
(Electronic resources)
Numerical simulation and experimental investigation of the fracture behaviour of an electron beam welded steel joint
by:
(Electronic resources)
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors.. Volume 2
by:
(Electronic resources)
Controlled synthesis and scanning tunneling microscopy study of graphene and graphene-based heterostructures
by:
(Electronic resources)
Best practices for the use of simulation in POD curves estimation = application to UT weld inspection /
by:
(Electronic resources)
Mechanics of additive and advanced manufacturing. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 9
by:
(Electronic resources)
Dynamic behavior of materials. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
Challenges in mechanics of time dependent materials. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 2
by:
(Electronic resources)
Micro and nanomechanics. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 5
by:
(Electronic resources)
Mechanics of biological systems, materials and other topics in experimental and applied mechanics. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 4
by:
(Electronic resources)
Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture
by:
(Electronic resources)
Composite materials engineering.. Volume 2,. Different types of composite materials
by:
(Electronic resources)
Composite materials engineering.. Volume 1,. Fundamentals of composite materials
by:
(Electronic resources)
Experimental approaches of NMR spectroscopy = methodology and application to life science and materials science /
by:
(Electronic resources)
Materials development for Active/Passive components of a supercapacitor = background, present status and future perspective /
by:
(Electronic resources)
Advancement of optical methods in experimental mechanics. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 3
by:
(Electronic resources)
Mechanics of composite and multi-functional materials. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 6
by:
(Electronic resources)
Asymptotical mechanics of composites = modelling composites without FEM /
by:
(Electronic resources)
Sensors, algorithms and applications for structural health monitoring = IIW Seminar on SHM, 2015 /
by:
(Electronic resources)
A journey around the different scales involved in the description of matter and complex systems = a brief overview with special emphasis on kinetic theory approaches /
by:
(Electronic resources)
A first introduction to the finite element analysis program MSC Marc/Mentat
by:
(Electronic resources)
Energy technology 2018 = carbon dioxide management and other technologies /
by:
(Electronic resources)
Advances in mechanics of materials and structural analysis = in honor of Reinhold Kienzler /
by:
(Electronic resources)
Design optimisation and validation of phononic crystal plates for manipulation of elastodynamic guided waves
by:
(Electronic resources)
Surfaces and interfaces in natural fibre reinforced composites = fundamentals, modifications and characterization /
by:
(Electronic resources)
Testing and characterization of sustainable innovative bituminous materials and systems = state-of-the-art report of the RILEM Technical Committee 237-SIB /
by:
(Electronic resources)
Assemblies of gold nanoparticles at liquid-liquid interfaces = from liquid optics to electrocatalysis /
by:
(Electronic resources)
Advanced packaging and manufacturing technology based on adhesion engineering = wafer-level transfer packaging and fabrication techniques using interface energy control method /
by:
(Electronic resources)
Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives = energy, aerospace, and industrial applications /
by:
(Electronic resources)
Handbook of sol-gel science and technology = processing, characterization and applications /
by:
(Electronic resources)
Mechanisms of cracking and debonding in asphalt and composite pavements = state-of-the-art of the RILEM TC 241-MCD /
by:
(Electronic resources)
Developing novel spinning methods to fabricate continuous multifunctional fibres for bioapplications
by:
(Electronic resources)
Uniaxial stress technique and investigations of correlated electron systems
by:
(Electronic resources)
Thermal cracking of massive concrete structures = state of the art report of the RILEM Technical Committee 254-CMS /
by:
(Electronic resources)
Current trends in friction stir welding (FSW) and frictionstir spot welding (FSSW) = an overview and case studies /
by:
(Electronic resources)
Recent advancements in materials and systems for thermal energy storage = an introduction to experimental characterization methods /
by:
(Electronic resources)
Challenges in mechanics of time-dependent materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 2 :
by:
(Electronic resources)
Structural analysis of historical constructions = an interdisciplinary approach /
by:
(Electronic resources)
Advances in materials and metallurgy = select proceedings of ICEMMM 2018 /
by:
(Electronic resources)
RILEM 252-CMB Symposium = chemo-mechanical characterization of bituminous materials /
by:
(Electronic resources)
Reliability of selective laser melted AlSi12 alloy for quasistatic and fatigue applications
by:
(Electronic resources)
Fracture, fatigue, failure and damage evolution. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics. Volume 6 :
by:
(Electronic resources)
Vibrations in the production system = measurement and analysis with water jet technology /
by:
(Electronic resources)
Advancement of optical methods & digital image correlation in experimental mechanics. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 3
by:
(Electronic resources)
Nonlinear ultrasonic and vibro-acoustical techniques for nondestructive evaluation
by:
(Electronic resources)
Dynamic behavior of materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
Mechanics of composite, hybrid and multifunctional materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 5
by:
(Electronic resources)
Topology-based modeling of textile structures and their joint assemblies = principles, algorithms and limitations /
by:
(Electronic resources)
Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors
by:
(Electronic resources)
Pulsed electron-electron double resonance = nanoscale distance measurement in the biological, materials and chemical sciences /
by:
(Electronic resources)
Discrete element method in the design of transport systems = verification and validation of 3D models /
by:
(Electronic resources)
Die-attach materials for high temperature applications in microelectronics packaging = materials, processes, equipment, and reliability /
by:
(Electronic resources)
Shape casting = 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday /
by:
(Electronic resources)
Advanced real time imaging II = cutting-edge techniques in materials science studies /
by:
(Electronic resources)
Energy technology 2019 = carbon dioxide management and other technologies /
by:
(Electronic resources)
Antipodal Vivaldi antennas for microwave imaging of construction materials and structures
by:
(Electronic resources)
Multi-scale simulation of composite materials = results from the Project MuSiKo /
by:
(Electronic resources)
Advances in thin films, nanostructured materials, and coatings = selected papers from the 2018 International Conference on "Nanomaterials: Applications & Properties" /
by:
(Electronic resources)
Physics and techniques of ceramic and polymeric materials = proceedings of Chinese Materials Conference 2018 /
by:
(Electronic resources)
10th International Symposium on High-Temperature Metallurgical Processing
by:
(Electronic resources)
Spark plasma sintering of materials = advances in processing and applications /
by:
(Electronic resources)
Green materials engineering = an EPD Symposium in honor of Sergio Monteiro /
by:
(Electronic resources)
Optic diagnostics on pulverized coal particles combustion dynamics and alkali metal release behavior
by:
(Electronic resources)
A phenomenological mathematical modelling framework for the degradation of bioresorbable composites
by:
(Electronic resources)
New achievements in continuum mechanics and thermodynamics = a tribute to Wolfgang H. Muller /
by:
(Electronic resources)
Technologies for economical and functional lightweight design = Conference proceedings 2018 /
by:
(Electronic resources)
Electronic states of narrow-gap semiconductors under multi-extreme conditions
by:
(Electronic resources)
Thin-walled laminated structures = buckling, vibrations and their suppression /
by:
(Electronic resources)
Nanoscale materials for warfare agent detection = nanoscience for security /
by:
(Electronic resources)
Advances in mechanical engineering and mechanics = selected papers from the 4th Tunisian Congress on Mechanics, CoTuMe 2018, Hammamet, Tunisia, October 13-15, 2018 /
by:
(Electronic resources)
Modeling high temperature materials behavior for structural analysis.. Part II,. Solution procedures and structural analysis examples
by:
(Electronic resources)
Mechanical fatigue of metals = experimental and simulation perspectives /
by:
(Electronic resources)
Advances in acoustic emission technology = proceedings of the World Conference on Acoustic Emission-2017 /
by:
(Electronic resources)
Recent advances in material sciences = select proceedings of ICLIET 2018 /
by:
(Electronic resources)
Nondestructive evaluation and monitoring technologies, documentation, diagnosis and preservation of cultural heritage
by:
(Electronic resources)
Drying kinetics in building materials and components = the interface influence /
by:
(Electronic resources)
Qualitative theory in structural mechanics = qualitative properties and existence of solutions /
by:
(Electronic resources)
Si detectors and characterization for HEP and photon science experiment = how to design detectors by TCAD simulation /
by:
(Electronic resources)
Engineering of scintillation materials and radiation technologies = selected articles of ISMART2018 /
by:
(Electronic resources)
Advances in design, simulation and manufacturing II = proceedings of the 2nd International Conference on Design, Simulation, Manufacturing : the Innovation Exchange, DSMIE-2019, June 11-14, 2019, Lutsk, Ukraine /
by:
(Electronic resources)
Special topics in structural dynamics & experimental techniques. = proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 /. Volume 5
by:
(Electronic resources)
Heat transfer enhancement in externally finned tubes and internally finned tubes and annuli
by:
(Electronic resources)
Mechanics of fibrous materials and applications = physical and modeling aspects /
by:
(Electronic resources)
Interface influence on moisture transport in building components = the wetting process /
by:
(Electronic resources)
Recycled polyester = manufacturing, properties, test methods, and identification /
by:
(Electronic resources)
Advances in visualization and optimization techniques for multidisciplinary research = trends in modelling and simulations for engineering applications /
by:
(Electronic resources)
Advances in materials, mechanics and manufacturing = proceedings of the Second International Conference on Advanced Materials, Mechanics and Manufacturing (A3M'2018), December 17-19, 2018 Hammamet, Tunisia /
by:
(Electronic resources)
Mining machines and earth-moving equipment = problems of design, research and maintenance /
by:
(Electronic resources)
Advances in fire safety engineering = selected papers from the 5th Iberian-Latin-American Congress on Fire Safety, CILASCI 5, July 15-17, 2019, Porto, Portugal /
by:
(Electronic resources)
Advances in unconventional machining and composites = proceedings of AIMTDR 2018 /
by:
(Electronic resources)
Dynamic behavior of materials. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 1
by:
(Electronic resources)
3rd International Conference on the Application of Superabsorbent Polymers (SAP) and Other New Admixtures Towards Smart Concrete
by:
(Electronic resources)
Reference materials in measurement and technology = proceedings of the Third International Scientific Conference /
by:
(Electronic resources)
Advanced materials for defense = development, analysis and applications /
by:
(Electronic resources)
Buildings for education = a multidisciplinary overview of the design of school buildings /
by:
(Electronic resources)
Corrosion processes = sensing, monitoring, data analytics, prevention/protection, diagnosis/prognosis and maintenance strategies /
by:
(Electronic resources)
Advancements in optical methods and digital image correlation in experimental mechanics. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 3
by:
(Electronic resources)
Challenges in mechanics of time dependent materials, fracture, fatigue, failure and damage evolution. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 2
by:
(Electronic resources)
Mechanics of composite and multi-functional materials. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 5
by:
(Electronic resources)
Energy Technology 2020 = recycling, carbon dioxide management, and other technologies /
by:
(Electronic resources)
11th International Symposium on High-Temperature Metallurgical Processing
by:
(Electronic resources)
Thermophysical properties and measuring technique of Ge-Sb-Te alloys for phase change memory
by:
(Electronic resources)
Advances in thick section composite and sandwich structures = an anthology of ONR-sponsored research /
by:
(Electronic resources)
Residual stress, thermomechanics & infrared imaging and inverse problems. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 6
by:
(Electronic resources)
Microstructure and properties of micro- and nanoscale materials, films, and coatings (NAP 2019) = selected articles from the International Conference on Nanomaterials : Applications and Properties, (NAP 2019) /
by:
(Electronic resources)
Vapor crystal growth and characterization = ZnSe and related II-VI compound semiconductors /
by:
(Electronic resources)
Handbook on characterization of biomass, biowaste and related by-products
by:
(Electronic resources)
Biofibers and biopolymers for biocomposites = synthesis, characterization and properties /
by:
(Electronic resources)
Integrated computational materials engineering (ICME) = advancing computational and experimental methods /
by:
(Electronic resources)
Rare-earth metal recovery for green technologies = methods and applications /
by:
(Electronic resources)
Representation surfaces for physical properties of materials = a visual approach to understanding anisotropic materials /
by:
(Electronic resources)
Gems and gemmology = an introduction for archaeologists, art-historians and conservators /
by:
(Electronic resources)
Continuum mechanics, applied mathematics and scientific computing = Godunov's legacy : a liber amicorum to Professor Godunov /
by:
(Electronic resources)
Molecular dynamics simulations in statistical physics = theory and applications /
by:
(Electronic resources)
Deformation processes in TRIP/TWIP steels = in-situ characterization techniques /
by:
(Electronic resources)
Proceedings of the 11th International Conference on Porous Metals and Metallic Foams (MetFoam 2019)
by:
(Electronic resources)
Temperature-dependent deformation and fracture behavior of a talcum-filled co-polymer
by:
(Electronic resources)
Time-dependent mechanical behavior of ceramic-matrix composites at elevated temperatures
by:
(Electronic resources)
Calcined clays for sustainable concrete = proceedings of the 3rd International Conference on Calcined Clays for Sustainable Concrete /
by:
(Electronic resources)
Synchrotron light sources and free-electron lasers = accelerator physics, instrumentation and science applications /
by:
(Electronic resources)
Transport of energetic electrons in solids = computer simulation with applications to materials analysis and characterization /
by:
(Electronic resources)
2D metal carbides and nitrides (MXenes) = structure, properties and applications /
by:
(Electronic resources)
Physical science under microgravity = experiments on board the SJ-10 recoverable satellite /
by:
(Electronic resources)
Innovations and breakthroughs in the gold and silver industries = concepts, applications and future trends /
by:
(Electronic resources)
Unconventional techniques for the production of light alloys and composites
by:
(Electronic resources)
Units of measurement = history, fundamentals and redefining the SI base units /
by:
(Electronic resources)
Ultra-high temperature materials.. III,. Refractory carbides II (Ti and V carbides)
by:
(Electronic resources)
Nanoscience and nanotechnology in security and protection against CBRN threats
by:
(Electronic resources)
Advances in metrology and measurement of engineering surfaces = select proceedings of ICFMMP 2019 /
by:
(Electronic resources)
Fatigue, durability, and fracture mechanics = proceedings of Fatigue Durability India 2019 /
by:
(Electronic resources)
Multiscaled PVA bionanocomposite films = characterisation and nanoscale modelling /
by:
(Electronic resources)
Biocomposite materials = design and mechanical properties characterization /
by:
(Electronic resources)
Modern Mossbauer spectroscopy = new challenges based on cutting-edge techniques /
by:
(Electronic resources)
Porous materials = theory and its application for environmental remediation /
by:
(Electronic resources)
Conservation and painting techniques of wall paintings on the ancient Silk Road
by:
(Electronic resources)
Technologies for economic and functional lightweight design = conference proceedings 2020 /
by:
(Electronic resources)
Materials and strength of gas turbine parts.. Volume 1,. Materials, properties, damage, deformation and fracture models
by:
(Electronic resources)
Advanced electromagnetic models for materials characterization and nondestructive evaluation
by:
(Electronic resources)
Crosslinkable polyethylene = manufacture, properties, recycling, and applications /
by:
(Electronic resources)
Non-destructive in situ strength assessment of concrete = practical application of the RILEM TC 249-ISC recommendations /
by:
(Electronic resources)
Elasticity and plasticity of large deformations = including gradient materials /
by:
(Electronic resources)
Synchrotron radiation science and applications = proceedings of the 2019 meeting of the Italian Synchrotron Radiation Society - dedicated to Carlo Lamberti /
by:
(Electronic resources)
Nonlinear elastic and inelastic models for shock compression of crystalline solids
by:
(Electronic resources)
Adhesive bonding of aircraft composite structures = non-destructive testing and quality assurance concepts /
by:
(Electronic resources)
Damage and fracture of ceramic-matrix composites under stochastic loading
by:
(Electronic resources)
Structural characterisation of natural and industrial porous materials = a manual /
by:
(Electronic resources)
Advances in materials science and engineering = select proceedings of ICFMMP 2019 /
by:
(Electronic resources)
Advances in materials engineering and manufacturing processes = select proceedings of ICFTMM 2019 /
by:
(Electronic resources)
Proceedings of ICDMC 2019 = design, materials, cryogenics, and constructions /
by:
(Electronic resources)
Sustainable phase change and polymeric water absorbent materials = heat stress reduction in helmets /
by:
(Electronic resources)
Characterization and modification of graphene-based interfacial mechanical behavior
by:
(Electronic resources)
Accelerated pavement testing to transport infrastructure innovation = proceedings of 6th APT Conference /
by:
(Electronic resources)
Materials phase change PDE control & estimation = from additive manufacturing to polar ice /
by:
(Electronic resources)
Study of new ternary rare-earth intermetallic germanides with polar covalent bonding = beyond the Zintl picture /
by:
(Electronic resources)
Proceedings of the 5th International Symposium on Asphalt Pavements & Environment (APE)
by:
(Electronic resources)
Troubleshooting finite-element modeling with Abaqus = with application in structural engineering analysis /
by:
(Electronic resources)
Fabrication and physical properties of novel two-dimensional crystal materials beyond graphene = germanene, hafnene and PtSe2 /
by:
(Electronic resources)
Laser doppler vibrometry = a multimedia guide to its features and usage /
by:
(Electronic resources)
Bioepoxy/clay nanocomposites = fabrication optimisation, properties and modelling /
by:
(Electronic resources)
One-dimensional mesoporous inorganic nanomaterials = basics and applications /
by:
(Electronic resources)
Advances in materials, mechanics and manufacturing II = proceedings of the third International Conference on Advanced Materials, Mechanics and Manufacturing (A3M'2021), March 25-27, 2021 /
by:
(Electronic resources)
Proceedings of the RILEM International Symposium on Bituminous Materials = ISBM Lyon 2020 /
by:
(Electronic resources)
Principles of extreme mechanics (XM) in design for reliability (DfR) = with special emphasis on recent advances in materials characterization and experimentation techniques /
by:
(Electronic resources)
Testing and characterisation of earth-based building materials and elements = state-of-the-art report of the RILEM TC 274-TCE /
by:
(Electronic resources)
Mechanical characterization using digital image correlation = advanced fibrous composite laminates /
by:
(Electronic resources)
Silicon Based Polymers = Advances in Synthesis and Supramolecular Organization /
by:
(Language materials, printed)
Safety of nanoparticles = from manufacturing to medical applications /
by:
(Language materials, printed)
Electrochemical methods in archaeometry, conservation and restoration
by:
(Language materials, printed)
Materials, technologies and practice in historic heritage structures
by:
(Language materials, printed)
Studying kinetics with neutrons = prospects for time resolved neutron scattering /
by:
(Language materials, printed)
IUTAM symposium on recent advances of acoustic waves in solids = Proceedings of the IUTAM Symposium on Recent Advances of Acoustic Waves in Solids, Taipei, Taiwan, May 25-28, 2009 /
by:
(Language materials, printed)
High-temperature cuprate superconductors = experiment, theory, and applications /
by:
(Language materials, printed)
Boron rich solids = sensors, ultra high temperature ceramics, thermoelectrics, armor /
by:
(Electronic resources)
Transport in metal-oxide-semiconductor structures = mobile ions effects on the oxide properties /
by:
(Electronic resources)
Multifunctional polycrystalline ferroelectric materials = processing and properties /
by:
(Electronic resources)
Materials with complex behaviour II = properties, non-classical materials and new technologies /
by:
(Electronic resources)
Continuum damage mechanics = a continuum mechanics approach to the analysis of damage and fracture /
by:
(Electronic resources)
Characterization of microstructures by analytical electron microscopy (AEM)
by:
(Electronic resources)
7th RILEM International Conference on Cracking in Pavements = mechanisms, modeling, testing, detection and prevention case histories /
by:
(Electronic resources)
Smart materials in structural health monitoring, control and biomechanics
by:
(Electronic resources)
Experimental mechanics of composite, hybrid, and multifunctional materials. = proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics /. Volume 6
by:
(Electronic resources)
Functional nanostructures fabricated by focused electron/ion beam induced deposition
by:
(Electronic resources)
Analytical transmission electron microscopy = an introduction for operators /
by:
(Electronic resources)
Structural properties of porous materials and powders used in different fields of science and technology
by:
(Electronic resources)
Advances in acoustic emission technology = proceedings of the World Conference on Acoustic Emission-2013 /
by:
(Electronic resources)
Metallic butterfly wing scales = superstructures with high surface-enhancement properties for optical applications /
by:
(Electronic resources)
Chromium doped TiO2 sputtered thin films = synthesis, physical investigations and applications /
by:
(Electronic resources)
Probing crystal plasticity at the nanoscales = Synchrotron X-ray Microdiffraction /
by:
(Electronic resources)
Colloidal crystals of spheres and cubes in real and reciprocal space
by:
(Language materials, printed)
Small-angle scattering from confined and interfacial fluids = applications to energy storage and environmental science /
by:
(Electronic resources)
Development of infrared techniques for practical defect identification in bonded joints
by:
(Electronic resources)
Computer simulation tools for X-ray analysis = scattering and diffraction methods /
by:
(Electronic resources)
Microstructure-property correlations for hard, superhard, and ultrahard materials
by:
(Electronic resources)
Electrochemistry of N4 macrocyclic metal complexes.. Volume 2,. Biomimesis, electroanalysis and electrosynthesis of MN4 metal complexes
by:
(Electronic resources)
Defect sizing using non-destructive ultrasonic testing = applying bandwidth-dependent DAC and DGS curves /
by:
(Electronic resources)
Synchrotron light sources and free-electron lasers = accelerator physics, instrumentation and science applications /
by:
(Electronic resources)
In situ monitoring of fiber-reinforced composites = theory, basic concepts, methods, and applications /
by:
(Electronic resources)
Advances in nanocomposites = modeling, characterization and applications /
by:
(Electronic resources)
Foundations of molecular modeling and simulation = select papers from FOMMS 2015 /
by:
(Electronic resources)
Transport processes in macroscopically disordered media = from mean field theory to percolation /
by:
(Electronic resources)
Engineering solutions for sustainability = materials and resources II : held at the TMS 2015 Annual Meeting, Orlando, Florida, USA, March 18-19, 2015 /
by:
(Electronic resources)
Textiles and clothing sustainability = sustainable fashion and consumption /
by:
(Electronic resources)
Textiles and clothing sustainability = recycled and upcycled textiles and fashion /
by:
(Electronic resources)
Textiles and clothing sustainability = implications in textiles and fashion /
by:
(Electronic resources)
Textiles and clothing sustainability = sustainable textile chemical processes /
by:
(Electronic resources)
Computational multiscale modeling of fluids and solids = theory and applications /
by:
(Electronic resources)
Variational continuum multiphase poroelasticity = theory and applications /
by:
(Electronic resources)
Solutions manual to accompany Transport phenomena in materials processing
by:
(Electronic resources)
Magnetic resonance of semiconductors and their nanostructures = basic and advanced applications /
by:
(Electronic resources)
Generalized dynamics of soft-matter quasicrystals = mathematical models and solutions /
by:
(Electronic resources)
Fracture, fatigue, failure and damage evolution. = proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics /. Volume 7
by:
(Electronic resources)
Spectroscopy of complex oxide interfaces = photoemission and related spectroscopies /
by:
(Electronic resources)
Measurement, testing and sensor technology = fundamentals and application to materials and technical systems /
by:
(Electronic resources)
Tetrahedrally bonded amorphous carbon films I = basics, structure and preparation /
by:
(Electronic resources)
Kelvin probe force microscopy = from single charge detection to device characterization /
by:
(Electronic resources)
Atomic particles and atom systems = data for properties of atomic objects and processes /
by:
(Electronic resources)
Molecular spectroscopy = experiment and theory : from molecules to functional materials /
by:
(Electronic resources)
Spectroscopic methods in the study of kaolin minerals and their modifications
by:
(Electronic resources)
Photo-thermal spectroscopy with plasmonic and rare-earth doped (nano)materials = basic principles and applications /
by:
(Electronic resources)
Ultra-high temperature materials II = refractory carbides I (Ta, Hf, Nb and Zr carbides) : a comprehensive guide and reference book /
by:
(Electronic resources)
Vibrational (infrared and raman) spectra of minerals and related compounds
by:
(Electronic resources)
Statistical meso-mechanics of damage and failure = how microdamage induces disaster : series publication of multiscale mechanics /
by:
(Electronic resources)
Traceability, validation and measurement uncertainty in chemistry.. Vol. 3,. Practical examples
by:
(Electronic resources)
CT scan generated material twins for composites manufacturing in Industry 4.0
by:
(Electronic resources)
Polyvinyl alcohol/halloysite nanotube bionanocomposites as biodegradable packaging materials
by:
(Electronic resources)
Advances in sustainable polymers = synthesis, fabrication and characterization /
by:
(Electronic resources)
Fundamentals of materials science = the microstructure-property relationship using metals as model systems /
by:
(Electronic resources)
Polyvinylchloride-based blends = preparation, characterization and applications /
by:
(Electronic resources)
Collective excitations in the antisymmetric channel of Raman spectroscopy
by:
(Electronic resources)
Show more
Fewer
Subjects