Materials Engineering.

Advances in structural engineering.. Volume one. Mechanics. by: (Electronic resources)

Advances in structural engineering.. Volume two. Dynamics. by: (Electronic resources)

A primer on the geometry of carbon nanotubes and their modifications by: (Electronic resources)

Insight into designing biocompatible magnesium alloys and composites = processing, mechanical and corrosion characteristics / by: (Electronic resources)

Modeling approaches to natural convection in porous media by: (Electronic resources)

Transparent ceramics by: (Electronic resources)

Electro-chemo-mechanics of anodic porous alumina nano-honeycombs = self-ordered growth and actuation / by: (Electronic resources)

Eco-friendly polymer nanocomposites = processing and properties / by: (Language materials, printed)

From creep damage mechanics to homogenization methods = a Liber Amicorum to celebrate the birthday of Nobutada Ohno / by: (Language materials, printed)

Furniture design by: (Language materials, printed)

Nanoporous alumina = fabrication, structure, properties and applications / by: (Electronic resources)

Electrochemically engineered nanoporous materials = methods, properties and applications / by: (Electronic resources)

Eco-friendly polymer nanocomposites = chemistry and applications / by: (Electronic resources)

Temperature measurement during millisecond annealing = ripple pyrometry for flash lamp annealers / by: (Electronic resources)

Defects and impurities in silicon materials = an introduction to atomic-level silicon engineering / by: (Electronic resources)

Design and analysis of reinforced fiber composites by: (Electronic resources)

Fluid flow and heat transfer in rotating porous media by: (Electronic resources)

Materials for energy infrastructure by: (Electronic resources)

Textile materials for lightweight constructions = technologies - methods - materials - properties / by: (Electronic resources)

Nanomaterials in extreme environments = fundamentals and applications / by: (Electronic resources)

Active terahertz metamaterial for biomedical applications by: (Electronic resources)

Smart Intelligent Aircraft Structures (SARISTU) = proceedings of the Final Project Conference / by: (Electronic resources)

Challenges in mechanics of time dependent materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Advancement of optical methods in experimental mechanics. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Electronic resources)

Silica aerogel composites = novel fabrication methods / by: (Electronic resources)

Magnesium technology 2012 = proceedings of symsposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) ; held during TMS 2012 Annual Meeting & Exhibition, Orlando, Flordia, USA, March 11-15, 2012 / by: (Electronic resources)

Magnesium technology 2013 = proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (Electronic resources)

3D MS = proceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (Electronic resources)

TMS 2015 = 144th Annual Meeting & Exhibition : supplemental proceedings / by: (Electronic resources)

Shape casting = 5th International Symposium 2014 :: proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society), held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (Electronic resources)

Light metals 2014 = proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2014 Annual Meeting & Exhibition, February 16-20, 2014, San Diego, California, USA / by: (Electronic resources)

Ni-Co 2013 = proceedings of symposium sponsored by the TMS Extraction & Processing Division, TMS High Temperature Alloys Committee, and the Metallurgy and Materials Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) : held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (Electronic resources)

Light metals 2011 = proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011 / by: (Electronic resources)

The production and processing of inorganic materials by: (Electronic resources)

Shape casting = 6th International Symposium : proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Friction stir welding and processing VIII = proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Light metals 2012 = proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012 / by: (Electronic resources)

Energy technology 2016 = carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dixoide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (Electronic resources)

Magnesium technology 2015 = proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Rare metal technology 2015 = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Essential readings in light metals.. Volume 4,. Electrode technology for aluminum production by: (Electronic resources)

Proceedings of the III Advanced Ceramics and Applications Conference by: (Electronic resources)

The automated design of materials far from equilibrium by: (Electronic resources)

Information science for materials discovery and design by: (Electronic resources)

Solid oxide fuel cell components = interfacial compatibility of SOFC glass seals / by: (Electronic resources)

Mechanothermodynamics by: (Electronic resources)

Nano and biotech based materials for energy building efficiency by: (Electronic resources)

Biomaterials and medical devices = a perspective from an emerging country / by: (Electronic resources)

Electromagnetic ultrasonic guided waves by: (Electronic resources)

Handbook of bioceramics and biocomposites by: (Electronic resources)

Peptide-mediated biomineralization by: (Electronic resources)

Corrosion control and surface finishing = environmentally friendly approaches / by: (Electronic resources)

Power systems grounding by: (Electronic resources)

Generalized continua as models for classical and advanced materials by: (Electronic resources)

Microstructure-property correlations for hard, superhard, and ultrahard materials by: (Electronic resources)

Nanoclay reinforced polymer composites = natural fibre/nanoclay hybrid composites / by: (Electronic resources)

Surface modifications and growth of titanium dioxide for photo-electrochemical water splitting by: (Electronic resources)

Carbon nanoparticles and nanostructures by: (Electronic resources)

Particulate composites = fundamentals and applications / by: (Electronic resources)

Advances in nanocomposites = modeling, characterization and applications / by: (Electronic resources)

Neural engineering = from advanced biomaterials to 3D fabrication techniques / by: (Electronic resources)

Self-healing materials by: (Electronic resources)

Electromechanically active polymers = a concise reference / by: (Electronic resources)

Refractive indices of solids by: (Electronic resources)

Nanoclay reinforced polymer composites = nanocomposites and bionanocomposites / by: (Electronic resources)

Physics and mechanics of primary well cementing by: (Electronic resources)

Phosphors, up conversion nano particles, quantum dots and their applications.. Volume 2 by: (Electronic resources)

Electrochemistry and corrosion science by: (Electronic resources)

Handbook of maleic anhydride based materials = syntheses, properties and applications / by: (Electronic resources)

Rare metal technology 2016 = proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Commitee and the Extraction & Processing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Rewas 2016 = towards materials resource sustainability : proceedings of a symposium sponsored by the Recycling and Environmental Technologies Committee, the Materials and Society Committee, the Extraction & Processing Division, and the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) = sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held July 17-21, 2016 Omni William Penn Hotel, Pittsburgh, Pennsylvania, USA / by: (Electronic resources)

7th International Symposium on High-Temperature Metallurgical Processing = proceedings of a symposium sponsored by the Pyrometallurgy Committee of the Extraction and Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016 145th Annual Meeting & Exhibition, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Friction stir welding and processing VII = proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) ; held during the TMS 2013 Annual Meeting & Exhibition San Antonio, Texas USA March 3-7, 2013 / by: (Electronic resources)

EPD Congress 2016 = proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Magnesium technology 2016 = proceeding of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

Advances in the science and engineering of casting solidification = an MPMD Symposium Honoring Doru Michael Stefanescu : proceedings of a symposium sponsored by the Materials Processing & Manufacturing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Florida, USA / by: (Electronic resources)

Diffusion in solids by: (Electronic resources)

Characterization of minerals, metals, and materials 2016 = proceedings of a symposium sponsored by the Materials Characterization Committee of the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

EPD Congress 2015 = proceedings of a symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

6th International Symposium on High-Temperature Metallurgical Processing = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Energy technology 2015 = carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dioxide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (Electronic resources)

Magnesium technology 2011 = proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA February 27-March 3, 2011 / by: (Electronic resources)

Essential readings in light metals.. Volume 3,. Cast shop for aluminum production by: (Electronic resources)

Celebrating the megascale = proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson : proceedings of a symposium sponsored by the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (Electronic resources)

TMS 2014 = 143rd Annual Meeting & Exhibition : Annual meeting supplemental proceedings / by: (Electronic resources)

Fatigue of materials III = advances and emergencies in understanding : proceedings of the third biennial symposium ; sponsored by The Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2014 (MS&T'14), October 12-16, 2014 in Pittsburgh, Pennsylvania / by: (Electronic resources)

Drying, roasting, and calcining of minerals = proceedings of a symposium sponsored by The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Light metals 2015 = proceedings of the symposia sponsored by the TMS Alumnium Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Electronic resources)

Light metals 2016 = proceedings of the symposia sponsored by the Aluminum Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (Electronic resources)

TMS 2016 = 145th Annual Meeting & Exhibition : supplemental proceedings / by: (Electronic resources)

Proceedings of the 1st International Conference on 3D Materials Science = held July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (Electronic resources)

Energy Materials 2014 = conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China / by: (Electronic resources)

REWAS 2013 = enabling materials resource sustainability : proceesdings of the symposium, REWAS 2013: enabling materials resource sustaunability, sponsored by the EPD-LMD Recycling and Environmental Technology Committee and the TMS Materials and Society Committee; and the symposium, Battery Recycling, sponsored by the EMPMD Energy Conversion and Storage Committee and the EPD-LMD Recycling and Environmental Technology Committee ; held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, by: (Electronic resources)

Proceedings of the TMS Middle East = Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) : held January 11-14, 2015, Doha, Qatar / by: (Electronic resources)

Essential readings in light metals.. Volume 1,. Alumina and bauxite by: (Electronic resources)

Advances in molten slags, fluxes, and salts = proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016 : sponsored by Extraction & Processing Division and Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) ; held May 22-25, 2016, Seattle Grand Hyatt, Seattle, Washington, USA / by: (Electronic resources)

Essential readings in light metals.. Volume 2,. Aluminum reduction technology by: (Electronic resources)

PRICM 8 = proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing : sponsored by The Chinese Society for Metals (CSM), The Japan Institute of Metals (JIM), The Korean Institute of Metals and Materials (KIM), Materials Australia (MA), and the Minerals, Metals & Materials Society (TMS) ; held August 4-9, 2013, at the Hilton Waikoloa Village in Waikoloa, Hawaii, USA / by: (Electronic resources)

HSLA steels 2015, microalloying 2015 & offshore engineering steels 2015 = conference proceedings, held November 11-13th, 2015, Hangzhou, Zhejiang Province, China / by: (Electronic resources)

Engineering solutions for sustainability = materials and resources II : held at the TMS 2015 Annual Meeting, Orlando, Florida, USA, March 18-19, 2015 / by: (Electronic resources)

Large-scale production of paper-based Li-ion cells by: (Electronic resources)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 9 by: (Electronic resources)

Composite materials = processing, applications, characterizations / by: (Electronic resources)

Phosphors, up conversion nano particles, quantum dots and their applications.. Volume 1 by: (Electronic resources)

Magnesium technology 2017 by: (Electronic resources)

8th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

Fillers for polymer applications by: (Electronic resources)

Charge-trapping non-volatile memories.. Volume 2,. Emerging materials and structures by: (Electronic resources)

Applications of process engineering principles in materials processing, energy and environmental technologies = an EPD symposium in honor of Professor Ramana G. Reddy / by: (Electronic resources)

Mechanical and creep behavior of advanced materials = a SMD symposium honoring Professor K. Linga Murty / by: (Electronic resources)

Characterization of minerals, metals, and materials 2017 by: (Electronic resources)

TMS 2017 = 146th Annual Meeting & Exhibition Supplemental Proceedings / by: (Electronic resources)

Light metals 2017 by: (Electronic resources)

Materials processing fundamentals 2017 by: (Electronic resources)

Proceedings of the 3rd Pan American Materials Congress by: (Electronic resources)

Friction stir welding and processing IX by: (Electronic resources)

Material parameter identification and inverse problems in soft tissue biomechanics by: (Electronic resources)

Mechanics of composite and multi-functional materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Electronic resources)

Inorganic scintillators for detector systems = physical principles and crystal engineering / by: (Electronic resources)

Programming phase-field modeling by: (Electronic resources)

Materials, energy and environment engineering = select proceedings of ICACE 2015 / by: (Electronic resources)

Engineering applications of nanotechnology = from energy to drug delivery / by: (Electronic resources)

Models, simulation, and experimental issues in structural mechanics by: (Electronic resources)

Proceedings of the IV Advanced Ceramics and Applications Conference by: (Electronic resources)

Submicron porous materials by: (Electronic resources)

Basic thermochemistry in materials processing by: (Electronic resources)

Energy materials 2017 by: (Electronic resources)

Materials design and applications by: (Electronic resources)

Electro-chemo-mechanics of solids by: (Electronic resources)

Green biocomposites = design and applications / by: (Electronic resources)

Mixed convection in fluid superposed porous layers by: (Electronic resources)

Solutions manual to accompany Transport phenomena in materials processing by: (Electronic resources)

CFD modeling and simulation in materials processing 2016 = proceedings of a symposium sponsored by the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th annual meeting & exhibition, Februrary 14-18, Downton Nashville, Tennessee Music City Center / by: (Electronic resources)

Light metals 2013 = proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA March 3-7, 2013 / by: (Electronic resources)

Creep in ceramics by: (Electronic resources)

International Digital Imaging Correlation Society = proceedings of the first Annual Conference, 2016 / by: (Electronic resources)

Non-traditional micromachining processes = fundamentals and applications / by: (Electronic resources)

Bending behavior of thermoplastic composite sheets = viscoelasticity and temperature dependency in the draping process / by: (Electronic resources)

Wave dynamics and composite mechanics for microstructured materials and metamaterials by: (Electronic resources)

Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) by: (Electronic resources)

Magnesium technology 2018 by: (Electronic resources)

Materials processing fundamentals 2018 by: (Electronic resources)

Characterization of minerals, metals, and materials 2018 by: (Electronic resources)

9th International Symposium on High-Temperature Metallurgical processing by: (Electronic resources)

Metal-matrix composites innovations, advances and applications = an SMD Symposium in Honor of William C. Harrigan, Jr. / by: (Electronic resources)

Mechanics for materials and technologies by: (Electronic resources)

On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact by: (Electronic resources)

Protection of materials and structures from the space environment = ICPMSE-11 / by: (Electronic resources)

Deformation and fracture behaviour of polymer materials by: (Electronic resources)

Raw materials substitution sustainability by: (Electronic resources)

Applied metallurgy and corrosion control = a handbook for the petrochemical industry / by: (Electronic resources)

Ceramic membranes applied in separation processes by: (Electronic resources)

The political economy of Russian aluminium = between the dual state and global markets / by: (Electronic resources)

Wood polymer nanocomposites = chemical modifications, properties and sustainable applications / by: (Electronic resources)

Advances in nanomaterials = fundamentals, properties and applications / by: (Electronic resources)

Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications = presented at the XXV International Materials Research Congress - Cancun 2016 / by: (Electronic resources)

Physical test methods for elastomers by: (Electronic resources)

Electrochemistry for corrosion fundamentals by: (Electronic resources)

Carbon = the black, the gray and the transparent / by: (Electronic resources)

Frontiers in materials processing, applications, research and technology = select proceedings of FiMPART 2015 / by: (Electronic resources)

Bionanocomposites for packaging applications by: (Electronic resources)

Ferroic functional materials = experiment, modeling and simulation / by: (Electronic resources)

Spin dynamics and damping in ferromagnetic thin films and nanostructures by: (Electronic resources)

Proceedings of the International Conference on Microplastic Pollution in the Mediterranean Sea by: (Electronic resources)

China's high-speed rail technology = an international perspective / by: (Electronic resources)

Advances and challenges in structural engineering = proceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 : the Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Materials handbook = a concise desktop reference / by: (Electronic resources)

Magnesium technology 2019 by: (Electronic resources)

Friction stir welding and processing X by: (Electronic resources)

10th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

REWAS 2019 = manufacturing the circular materials economy / by: (Electronic resources)

Light metals 2019 by: (Electronic resources)

Spark plasma sintering of materials = advances in processing and applications / by: (Electronic resources)

Green materials engineering = an EPD Symposium in honor of Sergio Monteiro / by: (Electronic resources)

TMS 2019 148th annual meeting & exhibition supplemental proceedings by: (Electronic resources)

Characterization of minerals, metals, and materials 2019 by: (Electronic resources)

TMS 2018 147th Annual Meeting & Exhibition supplemental proceedings by: (Electronic resources)

Light Metals 2018 by: (Electronic resources)

Advanced high strength steel = processing and applications / by: (Electronic resources)

Shock and materials by: (Electronic resources)

Proceedings of the International Conference on Martensitic Transformations = Chicago / by: (Electronic resources)

Modeling, design, construction, and operation of power generators with solid oxide fuel cells = from single cell to complete power system / by: (Electronic resources)

Renewable and sustainable materials in green technology by: (Electronic resources)

Magnetostatic modelling of thin layers using the method of moments and its implementation in Octave/Matlab by: (Electronic resources)

Advanced functional materials = proceedings of Chinese Materials Conference 2017 / by: (Electronic resources)

Materials that move = smart materials, intelligent design / by: (Electronic resources)

Progress in materials science and engineering by: (Electronic resources)

Mechanical properties and working of metals and alloys by: (Electronic resources)

Fire retardancy behavior of polymer/clay nanocomposites by: (Electronic resources)

Handbook of sol-gel science and technology = processing, characterization and applications / by: (Electronic resources)

Advanced manufacturing and materials science = selected extended papers of ICAMMS 2018 / by: (Electronic resources)

The selected models of the mesostructure of composites = percolation, clusters, force fields / by: (Electronic resources)

Acetylene and its polymers = 150+ years of history / by: (Electronic resources)

Springer handbook of materials data by: (Electronic resources)

Powerful pulsed plasma generators = research and application / by: (Electronic resources)

3D printing and additive manufacturing technologies by: (Electronic resources)

Strengthening and Joining by Plastic Deformation = select papers from AIMTDR 2016 / by: (Electronic resources)

Cascade use in technologies 2018 = Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft - Oldenburg 2018 / by: (Electronic resources)

Advances in materials and metallurgy = select proceedings of ICEMMM 2018 / by: (Electronic resources)

Hot stamping of ultra high-strength steels = from a technological and business perspective / by: (Electronic resources)

Advances in manufacturing processes = select proceedings of ICEMMM 2018 / by: (Electronic resources)

Reliability of selective laser melted AlSi12 alloy for quasistatic and fatigue applications by: (Electronic resources)

Pipeline steels for sour service by: (Electronic resources)

Nano-energetic materials by: (Electronic resources)

Vibration analysis of functionally graded piezoelectric actuators by: (Electronic resources)

Semiconducting metal oxides for gas sensing by: (Electronic resources)

Materials design and applications.. II by: (Electronic resources)

Advances in materials, mechanical and industrial engineering = selected contributions from the First International Conference on Mechanical Engineering, Jadavpur University, Kolkata, India / by: (Electronic resources)

Handbook of nonlocal continuum mechanics for materials and structures by: (Electronic resources)

Advanced engineering for processes and technologies by: (Electronic resources)

Near net shape manufacturing processes by: (Electronic resources)

Anisotropic metal chalcogenide nanomaterials = synthesis, assembly, and applications / by: (Electronic resources)

Micro-electrical discharge machining processes = technologies and applications / by: (Electronic resources)

Innovation in materials science and engineering = proceedings of ICEMIT 2017.. Volume 2 / by: (Electronic resources)

Die-attach materials for high temperature applications in microelectronics packaging = materials, processes, equipment, and reliability / by: (Electronic resources)

Shape casting = 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday / by: (Electronic resources)

Advanced real time imaging II = cutting-edge techniques in materials science studies / by: (Electronic resources)

Materials processing fundamentals 2019 by: (Electronic resources)

Bio-based polymers and nanocomposites = preparation, processing, properties and performance / by: (Electronic resources)

Advances in thin films, nanostructured materials, and coatings = selected papers from the 2018 International Conference on "Nanomaterials: Applications & Properties" / by: (Electronic resources)

Physics and techniques of ceramic and polymeric materials = proceedings of Chinese Materials Conference 2018 / by: (Electronic resources)

Handbook of ecomaterials by: (Electronic resources)

Novel aspects of diamond = from growth to applications / by: (Electronic resources)

Mechanics of composite and multi-functional materials. = proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics /. Volume 5 by: (Electronic resources)

Self-healing nanotextured vascular engineering materials by: (Electronic resources)

Polypropylene handbook = morphology, blends and composites / by: (Electronic resources)

Highway engineering composite material and its application by: (Electronic resources)

Willemite-based glass ceramic doped by different percentage of erbium oxide and sintered in temperature of 500-1100C = physical and optical properties / by: (Electronic resources)

Handbook of mechanics of materials by: (Electronic resources)

High-entropy materials = a brief introduction / by: (Electronic resources)

Mechanical fatigue of metals = experimental and simulation perspectives / by: (Electronic resources)

Characterisation of turbulent duct flows = experiments and direct numerical simulations / by: (Electronic resources)

Sustainable lignin for carbon fibers = principles, techniques and applications / by: (Electronic resources)

Nanoelectronic materials = fundamentals and applications / by: (Electronic resources)

Functional textiles and clothing by: (Electronic resources)

Materials and manufacturing processes by: (Electronic resources)

Computational homogenization of heterogeneous materials with finite elements by: (Electronic resources)

Progress in engineering technology = automotive, energy generation, quality control and efficiency / by: (Electronic resources)

Structural materials = properties and selection / by: (Electronic resources)

Shape memory polymers, blends and composites = advances and applications / by: (Electronic resources)

Engineering design applications II = structures, materials and processes / by: (Electronic resources)

ICAF 2019 = structural integrity in the age of additive manufacturing : proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (Electronic resources)

Interface influence on moisture transport in building components = the wetting process / by: (Electronic resources)

iMEC-APCOMS 2019 = proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems / by: (Electronic resources)

Aerospace alloys by: (Electronic resources)

Advances in additive manufacturing and joining = proceedings of AIMTDR 2018 / by: (Electronic resources)

Plasticity, damage and fracture in advanced materials by: (Electronic resources)

Reference materials in measurement and technology = proceedings of the Third International Scientific Conference / by: (Electronic resources)

Advanced materials for defense = development, analysis and applications / by: (Electronic resources)

Corrosion processes = sensing, monitoring, data analytics, prevention/protection, diagnosis/prognosis and maintenance strategies / by: (Electronic resources)

Emerging research in science and engineering based on advanced experimental and computational strategies by: (Electronic resources)

PbZn 2020 = 9th International Symposium on Lead and Zinc Processing / by: (Electronic resources)

Light metals 2020 by: (Electronic resources)

Thermophysical properties and measuring technique of Ge-Sb-Te alloys for phase change memory by: (Electronic resources)

Materials processing fundamentals 2020 by: (Electronic resources)

Green production of carbon nanomaterials in molten salts and applications by: (Electronic resources)

Advances in powder and ceramic materials science by: (Electronic resources)

TMS 2020 149th Annual Meeting & Exhibition Supplemental proceedings by: (Electronic resources)

Energy Technology 2020 = recycling, carbon dioxide management, and other technologies / by: (Electronic resources)

Aquatic biopolymers = understanding their industrial significance and environmental implications / by: (Electronic resources)

Rare Metal Technology 2020 by: (Electronic resources)

11th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

Solid-state welding = friction and friction stir welding processes / by: (Electronic resources)

Advances in mechanical engineering = select proceedings of ICRIDME 2018 / by: (Electronic resources)

Vapor crystal growth and characterization = ZnSe and related II-VI compound semiconductors / by: (Electronic resources)

Wood & fire safety = proceedings of the 9th International Conference on Wood & Fire Safety 2020 / by: (Electronic resources)

RF power semiconductor generator application in heating and energy utilization by: (Electronic resources)

Molecular nanomagnets = fundamental understanding / by: (Electronic resources)

Bamboo fiber composites = processing, properties and applications / by: (Electronic resources)

Structural health monitoring system for synthetic, hybrid and natural fiber composites by: (Electronic resources)

Tribological applications of composite materials by: (Electronic resources)

Materials research and applications = select papers from JCH8-2019 / by: (Electronic resources)

Graphene based biopolymer nanocomposites by: (Electronic resources)

High-performance ferrous alloys by: (Electronic resources)

Functional textiles and clothing 2020 by: (Electronic resources)

Machining and machinability of fiber reinforced polymer composites by: (Electronic resources)

Pineapple leaf fibers = processing, properties and applications / by: (Electronic resources)

Revolutionizing aircraft materials and processes by: (Electronic resources)

Integrated computational materials engineering (ICME) = advancing computational and experimental methods / by: (Electronic resources)

Surface engineering of modern materials by: (Electronic resources)

Deformation processes in TRIP/TWIP steels = in-situ characterization techniques / by: (Electronic resources)

Lignin = biosynthesis and transformation for industrial applications / by: (Electronic resources)

Proceedings of the 2nd International Conference on Microplastic Pollution in the Mediterranean Sea by: (Electronic resources)

IRC-SET 2018 = proceedings of the 4th IRC Conference on Science, Engineering and Technology / by: (Electronic resources)

Surface engineering of graphene by: (Electronic resources)

Nanoengineering materials for biomedical uses by: (Electronic resources)

Electronic waste and printed circuit board recycling technologies by: (Electronic resources)

Graphene functionalization strategies = from synthesis to applications / by: (Electronic resources)

Innovations and breakthroughs in the gold and silver industries = concepts, applications and future trends / by: (Electronic resources)

A practical guide to surface metrology by: (Electronic resources)

The world of materials by: (Electronic resources)

Introduction to refractories for iron- and steelmaking by: (Electronic resources)

Advances in design, simulation and manufacturing III = proceedings of the 3rd International Conference on Design, Simulation, Manufacturing : The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine.. Volume 1,. Manufacturing and materials engineering / by: (Electronic resources)

Architecting robust co-design of materials, products, and Manufacturing Processes by: (Electronic resources)

Advances in Materials Processing = select proceedings of ICFMMP 2019 / by: (Electronic resources)

Biointerface engineering = prospects in medical diagnostics and drug delivery / by: (Electronic resources)

Mechanics of metamaterials with negative parameters by: (Electronic resources)

Wooden facades and fire safety = effects of joint type on ignition behaviour / by: (Electronic resources)

Environmental remediation through carbon based nano composites by: (Electronic resources)

Adaptronics - smart structures and materials by: (Electronic resources)

Laser cladding of metals by: (Electronic resources)

Novel lanthanum zirconate-based thermal barrier coatings for energy applications by: (Electronic resources)

Phenolic polymers based composite materials by: (Electronic resources)

Multiscale solid mechanics = strength, durability, and dynamics / by: (Electronic resources)

Advances in mechanical processing and design = select proceedings of ICAMPD 2019 / by: (Electronic resources)

Advances in hybrid conducting polymer technology by: (Electronic resources)

Sustainable issues in infrastructure engineering = the official 2020 publication of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Electronic resources)

Strength of materials by: (Electronic resources)

Contemporary nanomaterials in material engineering applications by: (Electronic resources)

Eco-friendly adhesives for wood and natural fiber composites = characterization, fabrication and applications / by: (Electronic resources)

Computational materials, chemistry, and biochemistry = from bold initiatives to the last mile : in honor of William A. Goddard's contributions to science and engineering.. Volume 2 / by: (Electronic resources)

Biocomposite materials = design and mechanical properties characterization / by: (Electronic resources)

Innovations in everyday engineering materials by: (Electronic resources)

Collagen biografts for tunable drug delivery by: (Electronic resources)

Materials design and applications.. III by: (Electronic resources)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).. Volume II by: (Electronic resources)

Ammonothermal synthesis and crystal growth of nitrides = chemistry and technology / by: (Electronic resources)

Friction stir welding and processing XI by: (Electronic resources)

Materials with extreme wetting properties = methods and emerging industrial applications / by: (Electronic resources)

Ni-Co 2021 = the 5th International Symposium on Nickel and Cobalt / by: (Electronic resources)

Electrospinning for advanced energy storage applications by: (Electronic resources)

Materials, design, and manufacturing for sustainable environment = select proceedings of ICMDMSE 2020 / by: (Electronic resources)

Advances in manufacturing engineering and materials II = proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21-25 June, 2021, Novy Smokovec, Slovakia / by: (Electronic resources)

Fracture, fatigue, failure and damage evolution. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Electronic resources)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (Electronic resources)

Materials engineering--from ideas to practice = an EPD Symposium in honor of Jiann-Yang Hwang / by: (Electronic resources)

Intelligent quality assessment of railway switches and crossings by: (Electronic resources)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020).. Volume I by: (Electronic resources)

Challenges in mechanics of time dependent materials. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

Handbook of spine technology by: (Electronic resources)

Crosslinkable polyethylene based blends and nanocomposites by: (Electronic resources)

Graphene and nanoparticles hybrid nanocomposites = from preparation to applications / by: (Electronic resources)

Carbide in special steel = formation mechanism and control technology / by: (Electronic resources)

Energy-sustainable advanced materials by: (Electronic resources)

Data technology in materials modelling by: (Electronic resources)

Artificial intelligence for materials science by: (Electronic resources)

Electrochemical methods of nanostructure preparation by: (Electronic resources)

Comprehensive utilization of magnesium slag by pidgeon process by: (Electronic resources)

Crosslinkable polyethylene = manufacture, properties, recycling, and applications / by: (Electronic resources)

Inert anodes for aluminum electrolysis by: (Electronic resources)

Advances in design, simulation and manufacturing IV = proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.. Volume 1,. Manufacturing and materials engineering / by: (Electronic resources)

Advances in design, simulation and manufacturing IV = proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8-11, 2021, Lviv, Ukraine.. Volume 2,. Mechanical and chemical engineering / by: (Electronic resources)

Dynamic behavior of materials. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Mechanics of composite, hybrid and multifunctional materials. = proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics /. Volume 6 by: (Electronic resources)

Advances in engineering materials = select proceedings of FLAME 2020 / by: (Electronic resources)

Handbook of advanced ceramics and composites = defense, security, aerospace and energy applications / by: (Electronic resources)

CT scan generated material twins for composites manufacturing in Industry 4.0 by: (Electronic resources)

Self-healing and self-recovering hydrogels by: (Electronic resources)

Cold spray additive manufacturing = from fundamentals to applications / by: (Electronic resources)

Classical and relativistic rational extended thermodynamics of gases by: (Electronic resources)

Limestone mining in India by: (Electronic resources)

Monodisperse highly ordered and polydisperse biobased solid foams by: (Electronic resources)

Analysis of glass panels subjected to blast load by: (Electronic resources)

Basic quantum mechanics by: (Electronic resources)

Handbook of engineering practice of materials and corrosion by: (Electronic resources)

Mold and core sands in metalcasting = chemistry and ecology : sustainable development / by: (Electronic resources)

Phase transformation in metals = mathematics, theory and practice / by: (Electronic resources)

Physics and chemistry of Te and HgTe-based ternary semiconductor melts by: (Electronic resources)

Physical chemistry of metallurgical processes by: (Electronic resources)

Iron-based superconducting thin films by: (Electronic resources)

Structural materials = behavior, testing and evaluation / by: (Electronic resources)

Ten materials that shaped our world by: (Electronic resources)

Handbook of nanomaterials and nanocomposites for energy and environmental applications by: (Electronic resources)

New approaches of geotechnical engineering = soil characterization, sustainable materials and numerical simulation : proceedings of the 6th GeoChina International Conference on Civil & Transportation Infrastructures : from Engineering to Smart & Green Life Cycle Solutions -- Nanchang, China, 2021 / by: (Electronic resources)

Advances in machining of composite materials = conventional and non-conventional processes / by: (Electronic resources)

Advances in materials processing and manufacturing applications = proceedings of iCADMA 2020 / by: (Electronic resources)

Advances in mechanical engineering = select proceedings of CAMSE 2020 / by: (Electronic resources)

Progress in engineering technology II by: (Electronic resources)

Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials = ICE-SEAM 2019, 16-17 October 2019, Surakarta, Indonesia / by: (Electronic resources)

Manufacturing automotive components from sustainable natural fiber composites by: (Electronic resources)

Fiberglass science and technology = chemistry, characterization, processing, modeling, application, and sustainability / by: (Electronic resources)

Practical approach to 3D weaving by: (Electronic resources)

Thermal spray fundamentals = from powder to part / by: (Electronic resources)

6th International Conference on Adhesive Bonding 2021 = selected contributions of AB 2021 / by: (Electronic resources)

Handbook of laser micro- and nano-engineering by: (Electronic resources)

Bismuth-ferrite-based electrochemical supercapacitors by: (Electronic resources)

Austenitic TRIP/TWIP steels and steel-zirconia composites = design of tough, transformation-strengthened composites and structures / by: (Electronic resources)

Advances in materials science and engineering = select proceedings of ICFMMP 2019 / by: (Electronic resources)

Additive manufacturing processes by: (Electronic resources)

Superconductivity = from materials science to practical applications / by: (Electronic resources)

Local and nonlocal micromechanics of heterogeneous materials by: (Electronic resources)

Platinum monolayer electrocatalysts by: (Electronic resources)

Fibers for technical textiles by: (Electronic resources)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.. Volume 1,. Nano technology and advanced materials by: (Electronic resources)

Engineering of thermoplastic elastomer with graphene and other anisotropic nanofillers by: (Electronic resources)

Proceedings of the 4th International Symposium on Materials and Sustainable Development.. Volume 2,. Waste recycling and environment by: (Electronic resources)

Geopolymer and geopolymer matrix composites by: (Electronic resources)

Date palm fiber composites = processing, properties and applications / by: (Electronic resources)

An insight into metal based foams = processing, properties and applications / by: (Electronic resources)

Advances in sustainable polymers = synthesis, fabrication and characterization / by: (Electronic resources)

Revolution of perovskite = synthesis, properties and applications / by: (Electronic resources)

A virtual testing approach for honeycomb sandwich panel joints in aircraft interior by: (Electronic resources)

Advances in polymer processing 2020 = proceedings of the International Symposium on Plastics Technology / by: (Electronic resources)

Heatmetry = the science and practice of heat flux measurement / by: (Electronic resources)

Mechanical behavior and fracture of engineering materials by: (Electronic resources)

High-entropy materials = theory, experiments, and applications / by: (Electronic resources)

Resistive switching = oxide materials, mechanisms, devices and operations / by: (Electronic resources)

Fundamentals of metal joining = processes, mechanism and performance / by: (Electronic resources)

Advanced materials = an introduction to modern materials science / by: (Electronic resources)

Hydrometallurgy = fundamentals and applications / by: (Electronic resources)

Impact damages of braided composites by: (Electronic resources)

Advanced mems/nems fabrication and sensors by: (Electronic resources)

Recent advances in manufacturing engineering and processes = proceedings of ICMEP 2021 / by: (Electronic resources)

Advancement in materials, manufacturing and energy engineering. = select proceedings of ICAMME 2021 /. Vol. I by: (Electronic resources)

Challenges in mechanics of time dependent materials, mechanics of biological systems and materials & micro-and nanomechanics. = proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics /. Volume 2 by: (Electronic resources)

High-performance composite structures = additive manufacturing and processing / by: (Electronic resources)

Mechanics of composite, hybrid and multifunctional materials, fracture, fatigue, failure and damage evolution. = proceedings of the 2021 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (Electronic resources)

Smelter grade alumina from bauxite = history, best practices, and future challenges / by: (Electronic resources)

Theory and technology of roll stamping by: (Electronic resources)

REWAS 2022 = developing tomorrow's technical cycles.. (Volume I) / by: (Electronic resources)

Characterization of minerals, metals, and materials 2022 by: (Electronic resources)

Furnace tapping 2022 by: (Electronic resources)

12th International Symposium on High-Temperature Metallurgical Processing by: (Electronic resources)

Advances in mechanical and materials technology = select proceedings of EMSME 2020.. Volume 2 / by: (Electronic resources)

Bio-fiber reinforced composite materials = mechanical, thermal and tribological properties / by: (Electronic resources)

Advances in nanocomposite materials for environmental and energy harvesting applications by: (Electronic resources)

COVID-19 pandemic = research and development activities from modeling to realization / by: (Electronic resources)

Advancement in materials, manufacturing and energy engineering. = select proceedings of ICAMME 2021 /. Vol. II by: (Electronic resources)

In situ characterization methodology for the design and analysis of composite pressure vessels by: (Electronic resources)

TMS 2022 151st annual meeting & exhibition = supplemental proceedings / by: (Electronic resources)

Metal-matrix composites = advances in processing, characterization, performance and analysis / by: (Electronic resources)

Topological states for new modes of information storage and transfer = a survey of the status of the discovery of the majorana modes in the solid state / by: (Electronic resources)

Lignocellulosic fibers = sustainable biomaterials for green composites / by: (Electronic resources)

Welding simulations using ABAQUS = a practical guide for engineers / by: (Electronic resources)

Nondestructive testing and evaluation of fiber-reinforced composite structures by: (Electronic resources)

Advancement in materials processing technology = select proceedings of AMPT 2020 / by: (Electronic resources)

Textile and fashion education internationalization = a promising discipline from Southeast Asia / by: (Electronic resources)

Hydrogen assisted direct reduction of iron oxides by: (Electronic resources)

Electron microscopy in science and engineering by: (Electronic resources)

Advanced materials and engineering technologies by: (Electronic resources)

Hydrogen in engineering metallic materials = from atomic-level interactions to mechanical properties / by: (Electronic resources)

Characterization of nanomaterials in liquid disperse systems by: (Electronic resources)

Carbon composite catalysts = preparation, structural and morphological property and applications / by: (Electronic resources)

Materials, structures and manufacturing for aircraft by: (Electronic resources)

Silicon sensors and actuators = the feynman roadmap / by: (Electronic resources)

Advances in manufacturing III.. Volume 4,. Measurement and control systems: research and technology innovations, Industry 4.0 by: (Electronic resources)

Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021) by: (Electronic resources)

Precision forging technology and equipment for aluminum alloy by: (Electronic resources)

Advances in mechanical engineering and material science = select proceedings of ICAMEMS-2022 / by: (Electronic resources)

Advances in manufacturing III.. Volume 1,. Mechanical engineering: research and technology innovations, Industry 4.0 by: (Electronic resources)

Recent trends in design, materials and manufacturing = selected proceedings of ICRADMM 2020 / by: (Electronic resources)

Additive, subtractive, and hybrid technologies = recent innovations in manufacturing / by: (Electronic resources)

Mechanism-based assessment of structural and functional behavior of sustainable cottonid by: (Electronic resources)

Electron beam wire deposition technology and its application by: (Electronic resources)

Advances in design, simulation and manufacturing V = proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7-10, 2022, Poznan, Poland.. Volume 1,. Manufacturing and materials engineering / by: (Electronic resources)

Solid state engineering physics by: (Electronic resources)

Advanced nanomaterials by: (Electronic resources)

2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials by: (Electronic resources)

Recent trends in product design and intelligent manufacturing systems = select proceedings of IPDIMS 2021 / by: (Electronic resources)

Reinforced concrete = basic theory and standards / by: (Electronic resources)

Engineering design applications V = structures, materials and processes / by: (Electronic resources)

Manufacturing control of textile materials = operational computerized non-contact methods / by: (Electronic resources)

Recent advances in materials and modern manufacturing = select proceedings of ICAMMM 2021 / by: (Electronic resources)

Advanced transdisciplinary engineering and technology by: (Electronic resources)

Advanced engineering of materials through lasers by: (Electronic resources)

Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia by: (Electronic resources)

Novel lights sources beyond free electron lasers by: (Electronic resources)

Flexible OLEDs = fundamental and novel practical technologies / by: (Electronic resources)

Future landscape of structural materials in India by: (Electronic resources)

Reference materials in measurement and technology = proceedings of the fourth International Scientific Conference / by: (Electronic resources)

Chitin and chitosan = science and engineering / by: (Electronic resources)

Flexible metal forming technologies = principles, process and equipment / by: (Electronic resources)

Premetered coating methods = attractiveness and limitations / by: (Electronic resources)

Fire hazards of electrical cables by: (Electronic resources)

Theory and practice of thermal transient testing of electronic components by: (Electronic resources)

Materials design and applications IV by: (Electronic resources)

Green-based nanocomposite materials and applications by: (Electronic resources)

Multifunctional epoxy resins = self-healing, thermally and electrically conductive resins / by: (Electronic resources)

Advanced manufacturing processes IV = selected papers from the 4th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2022), September 6-9, 2022, Odessa, Ukraine / by: (Electronic resources)

Advances in mechanical and energy technology = select proceedings of ICMET 2021 / by: (Electronic resources)

Design and modeling of mechanical systems - V = proceedings of the 9th Conference on Design and Modeling of Mechanical Systems, CMSM'2021, December 20-22, 2021, Hammamet, Tunisia / by: (Electronic resources)

Materials, design and manufacturing for sustainable environment = select proceedings of ICMDMSE 2022 / by: (Electronic resources)

Probability-based multi-objective optimization for material selection by: (Electronic resources)

Proceedings of the 7th International Corrosion Prevention Symposium for Research Scholars = CORSYM 2021, November 2021 / by: (Electronic resources)

Proceedings of the Munich Symposium on Lightweight Design 2021 = Tagungsband zum Münchner Leichtbauseminar 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ERCAM 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ICOME 2021 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of CAMSE 2021 / by: (Electronic resources)

Slag-steel reaction and control of inclusions in Al deoxidized special steel by: (Electronic resources)

Modern hydroforming technology by: (Electronic resources)

Advances in functional and smart materials = select proceedings of ICFMMP 2021 / by: (Electronic resources)

Sustainable chemical, mineral and material processing = select proceedings of 74th Annual Session of Indian Institute of Chemical Engineers (CHEMCON-2021) / by: (Electronic resources)

Minimum quantity lubrication machining = process analysis and analytical modeling / by: (Electronic resources)

Recent developments in mechanics and design = select proceedings of INCOME 2021 / by: (Electronic resources)

Road planning - freeways and country roads by: (Electronic resources)

Emerging trends in mechanical and industrial engineering = select proceedings of ICETMIE 2022 / by: (Electronic resources)

Structural integrity and monitoring for composite materials by: (Electronic resources)

Friction stir welding and processing XII by: (Electronic resources)

Fiber reinforced polymeric materials and sustainable structures by: (Electronic resources)

Proceedings of the 2nd International Conference on Water Energy Food and Sustainability (ICoWEFS 2022) by: (Electronic resources)

Crystallographic texture and group representations by: (Electronic resources)

Recent advances in manufacturing engineering and processes = proceedings of ICMEP 2022 / by: (Electronic resources)

Proceedings of International Conference on Intelligent Manufacturing and Automation = ICIMA 2022 / by: (Electronic resources)

A two-dimensional piezoresistivity model for anisotropic materials and its application in self-sensing of carbon fiber reinforced plastics by: (Electronic resources)

Physicochemical aspects of metal-organic frameworks = a new class of coordinative materials / by: (Electronic resources)

Polymer 3D printing and 3D copying technology by: (Electronic resources)

Thin-walled composite protective structures for crashworthiness applications = recent advances and future developments / by: (Electronic resources)

Semiconducting metal oxides for gas sensing by: (Electronic resources)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).. Volume 1,. Advanced materials and manufacturing technologies by: (Electronic resources)

Modern optimization techniques for advanced machining = heuristic and metaheuristic techniques / by: (Electronic resources)

Recent advances in intelligent manufacturing = select proceedings of ICAME 2022 / by: (Electronic resources)

2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023) = smart sustainable materials and technologies.. (Volume 1) / by: (Electronic resources)

A pathway to safe, smart, and resilient road and mobility networks = the future of roadways: green, equitable, and integrated / by: (Electronic resources)

Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).. Volume 2,. Materials applications, machining, and renewable energy by: (Electronic resources)

Theoretical and practical aspects of manufacturing elastomer-metal based vibration dampers by: (Electronic resources)

Metakaolin-based geopolymers = design, mechanisms and performance / by: (Electronic resources)

Superhydrophobicity of surfaces dressed by electrospun fibers by: (Electronic resources)

Advancements in materials science and technology led by women by: (Electronic resources)

Resource recovery and recycling from waste metal dust by: (Electronic resources)

Springer handbook of wood science and technology by: (Electronic resources)

Thin films = processes and characterization techniques / by: (Electronic resources)

Key basic scientific problems on near-space vehicles by: (Electronic resources)

Metal micro-droplet based 3D printing technology by: (Electronic resources)

Applications of high energy radiations = synthesis and processing of polymeric materials / by: (Electronic resources)

Springer handbook of advanced catalyst characterization by: (Electronic resources)

Chemical engineering principles and applications by: (Electronic resources)

Advances in geoengineering, geotechnologies, and geoenvironment for earth systems and sustainable georesources management = proceedings of the 1st Conference on Georesources, Geomaterials, Geotechnologies and Geoenvironment (4GEO), Porto, 2019 / by: (Electronic resources)

Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering = ICAMME 2022, 9-10 August, Kuala Lumpur, Malaysia / by: (Electronic resources)

Advances in additive manufacturing and metal joining = proceedings of AIMTDR 2021 / by: (Electronic resources)

Advances in design, simulation and manufacturing VI. = proceedings of the 6th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2023, June 6-9, 2023, High Tatras, Slovak Republic /. Volume 2,. Mechanical and materials engineering by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ICRAMERD 2022 / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of FLAME 2022 / by: (Electronic resources)

Dissimilar metal joining by: (Electronic resources)

Progress in engineering technology V by: (Electronic resources)

Epoxidised natural rubber = properties & applications / by: (Electronic resources)

Multifunctional boron-nitride composites = preparation, properties and applications / by: (Electronic resources)

Electroslag remelting towards clean steel by: (Electronic resources)

Additive manufacturing = design, processes and applications / by: (Electronic resources)

Advancement of science and technology = materials and energy / by: (Electronic resources)

Recent advances in materials and manufacturing technology = select proceedings of ICAMMT 2022 / by: (Electronic resources)

Engineered stability = the history of composite materials in the 19th and 20th Centuries / by: (Electronic resources)

Advances in mechanics of materials for environmental and civil engineering by: (Electronic resources)

Emerging trends in materials research and manufacturing processes by: (Electronic resources)

Proceedings of the 8th International Conference on Mechanical, Automotive and Materials Engineering = CMAME 2022, 16-18 December, Hanoi, Vietnam / by: (Electronic resources)

Nanomaterials based printed strain sensor for wearable health monitoring applications by: (Electronic resources)

Recycled polymer blends and composites = processing, properties, and applications / by: (Electronic resources)

Proceedings of the 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference = APCOMS-IMEC 2022, Surakarta, Indonesia / by: (Electronic resources)

Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23) by: (Electronic resources)

Selected papers from ICIR EUROINVENT - 2023 = International Conference on Innovative Research / by: (Electronic resources)

Proceedings of the 3rd International Conference on Microplastic Pollution in the Mediterranean Sea by: (Electronic resources)

Progress in continuum mechanics by: (Electronic resources)

Proceedings of the 28th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2022 = ICEC28-ICMC 2022, Hangzhou, China / by: (Electronic resources)

Vanadium-based nanomaterials for electrochemical energy storage by: (Electronic resources)

Engineering design applications IV = structures, materials and processes / by: (Electronic resources)

Materialising the future = a learning path to understand, develop and apply emerging materials and technologies / by: (Electronic resources)

Structural composite materials = fabrication, properties, applications and challenges / by: (Electronic resources)

Rare earth metals and minerals industries = status and prospects / by: (Electronic resources)

Advanced manufacturing processes V = selected papers from the 5th Grabchenko's International Conference on Advanced Manufacturing Processes (InterPartner-2023), September 5-8, 2023, Odessa, Ukraine / by: (Electronic resources)

Laser powder bed fusion of additive manufacturing technology by: (Electronic resources)

Selected topics in manufacturing = emerging trends from the perspective of AITeM's young researchers / by: (Electronic resources)

Component surfaces = manufacturing-morphology-property relationships / by: (Electronic resources)

Superplastic forming/diffusion bonding technology of titanium alloys = theories and applications / by: (Electronic resources)

Practical implementations of additive manufacturing technologies by: (Electronic resources)

Advances in mechanical engineering and material science = select proceedings of ICAMEMS 2023 / by: (Electronic resources)

Advances in engineering materials = select proceedings of FLAME 2022 / by: (Electronic resources)

Advances in materials and agile manufacturing = select proceedings of CPIE 2023 / by: (Electronic resources)

Advances in additive manufacturing = materials, processes and applications : selected contributions to the 2nd Advances in Additive Manufacturing Conference (AIAM' 2023), May 18-20, 2023, Hammamet, Tunisia / by: (Electronic resources)

Fundamentals of metallurgical thermodynamics by: (Electronic resources)

System lightweight design for aviation by: (Electronic resources)

Advances in applied mechanics = proceedings of the Eleventh International Congress for Applied Mechanics (JET'2022), November 16-18, 2022, Marrakech, Morocco / by: (Electronic resources)

Magnetic levitation = innovation of density-based applications / by: (Electronic resources)

7th International Conference on Structural Adhesive Bonding 2023 = selected contributions of AB 2023 / by: (Electronic resources)

Cork-based materials in engineering = design and applications for green and sustainable systems / by: (Electronic resources)

Mechanical testing of materials by: (Electronic resources)

Electrospun nanofibrous separator for enhancing capacity of lithium-ion batteries by: (Electronic resources)

Reference materials in measurement and technology = proceedings of the fifth International Scientific Conference RMMT 2022 / by: (Electronic resources)

Handbook of liquid crystals.. Volume I,. Foundations and fundamental aspects by: (Electronic resources)

Intelligent manufacturing and mechatronics = selected articles from iM3F 2023, 7-8 August, Pekan, Malaysia / by: (Electronic resources)

Proceedings of the 5th International Conference on Metal Material Processes and Manufacturing = proceedings of ICMMPM 2023 / by: (Electronic resources)

Vegetable oil-based composites = processing, properties and applications / by: (Electronic resources)

Thermodynamics of crystalline materials = from nano to macro / by: (Electronic resources)

Friction and wear in metals by: (Electronic resources)

Ultrafine-grained materials by: (Electronic resources)

Proceedings of the 3rd International EUROMAGH Conference 2020 = sustainability and biobased materials on the road of bioeconomy / by: (Electronic resources)

Creep-fatigue fracture = analysis of internal damage / by: (Electronic resources)

2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023) = Innovations in Engineering and Smart Sustainable Technologies.. (Volume 2) / by: (Electronic resources)

Atomically precise electrocatalysts for electrochemical energy applications by: (Electronic resources)

Novel defence functional and engineering materials (NDFEM).. Volume 2,. Engineering materials for defence applications by: (Electronic resources)

Novel defence functional and engineering materials (NDFEM).. Volume 1,. Functional materials for defence applications by: (Electronic resources)

Functional textiles and clothing 2023 = proceedings of 3rd International Conference on Functional Textiles and Clothing 2023 / by: (Electronic resources)

Advances in manufacturing IV.. Volume 4,. Measurement and control systems : digitalization, sustainability and industry applications by: (Electronic resources)

Recent advances in aerospace engineering = select proceedings of MRAE 2023 / by: (Electronic resources)

Proceedings of the 3rd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).. Volume 3,. Sustainable approaches in machine design, life cycle engineering, and energy management for manufacturing processes by: (Electronic resources)

Advances in manufacturing and materials = select proceedings of FLUTE 2023 / by: (Electronic resources)

Recent advances in machines, mechanisms, materials and design = select proceedings of iNaCoMM 2023 / by: (Electronic resources)

Proceedings of the 6th International Conference on Metal Material Processes and Manufacturing. = proceedings of ICMMPM 2024, volume 2 /. Volume 2 by: (Electronic resources)

Advances in Applied Mechanics II = proceedings of the 12th International Congress for Applied Mechanics (JET'2024), November 13-15, 2024, Marrakech, Morocco / by: (Electronic resources)

Proceedings of the 6th International Conference on Metal Material Processes and Manufacturing. = proceedings of ICMMPM 2024, volume 1 /. Volume 1 by: (Electronic resources)

Synthesis and device applications of graphene derivatives and quantum dots by: (Electronic resources)

Proceedings of 2023 the 6th International Conference on Mechanical Engineering and Applied Composite Materials = MEACM2023 / by: (Electronic resources)

Advances in material science and engineering = selected articles from ICMMPE 2023, 16-Nov, Putrajaya, Malaysia / by: (Electronic resources)

Proceedings of the 3rd International Conference on Advanced Surface Enhancement (INCASE) 2023 = Surface engineering for sustainability / by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ICRAMERD 2023 / by: (Electronic resources)

Mistakes before, during and after heat treatment of steel by: (Electronic resources)

Ultraviolet light curable piezoelectric multi-phase composites by: (Electronic resources)

Wood & fire safety 2024 = proceedings of the 10th International Conference on Wood & Fire Safety 2024 / by: (Electronic resources)

Creation and accumulation of radiation defects in single crystals of magnesium oxide = research aims and methodology / by: (Electronic resources)

Novel aspects of diamond II = science and technology / by: (Electronic resources)

New achievements in mechanics = a tribute to Klaus Peter Herrmann / by: (Electronic resources)

Carburising and nitriding of iron alloys by: (Electronic resources)

High-performance metallic composites fabricated by advanced rolling techniques by: (Electronic resources)

Steel 4.0 = digitalization in steel industry / by: (Electronic resources)

Recent advancements in mechanical engineering = select proceedings of ICRAME 2022 / by: (Electronic resources)

Joining operations for aerospace materials by: (Electronic resources)

Applied building physics and materials science of natural fiber reinforced plastics = a guide for study and practice / by: (Electronic resources)

The ECPH encyclopedia of mining and metallurgy by: (Electronic resources)

Advances in design, simulation and manufacturing VII = proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic.. Volume 2,. Mechanical and materials engineering / by: (Electronic resources)

Advanced welding methods and equipment by: (Electronic resources)

Innovations in mechanical engineering III by: (Electronic resources)

Recent advances in materials and manufacturing = proceedings of ISME 2023 / by: (Electronic resources)

Materials science = theory and engineering / by: (Electronic resources)

Engineering design applications VI = structures, materials and processes / by: (Electronic resources)

Rubber based bionanocomposites = characterisation / by: (Electronic resources)

Nanotechnology in textile finishing = advancements and applications / by: (Electronic resources)

Advancements in materials processing technology. = select proceedings of AMPT 2023 /. Volume 2 by: (Electronic resources)

Recent advances in mechanical engineering = select proceedings of ICMET 2023 / by: (Electronic resources)

Proceedings of the 10th International Conference on Mechanical, Automotive and Materials Engineering = CMAME 2023, 20-22 December, Da Nang, Vietnam / by: (Electronic resources)

Textile materials for good health and wellbeing = design and applications / by: (Electronic resources)

Garment sizing and pattern making by: (Electronic resources)

Thermoplastic processing of structural metallic materials = experiments, theory, and modeling / by: (Electronic resources)

3D printing in space = an illustrated introduction / by: (Electronic resources)

Hydrophobic ceramic membranes for CO2 capture = advancing clean energy technologies / by: (Electronic resources)

Materials design and applications V by: (Electronic resources)

Proceedings of the 1st International Conference on Recent Advancements in Materials Science and Technology. = ICRAMST'24, 29-30 January, Coimbatore, India /. Volume II by: (Electronic resources)

The engineer's guide to materials = an applications-focused introduction to materials science / by: (Electronic resources)

Advanced materials and conversion technologies for personal protective equipment used in the COVID-19 pandemic by: (Electronic resources)

Advancements in materials processing technology. = select proceedings of AMPT 2023 /. Volume 1 by: (Electronic resources)

Sustainable materials and manufacturing techniques in aviation by: (Electronic resources)

Advances in manufacturing for aerospace alloys by: (Electronic resources)

Hybrid-energy cutting of aerospace alloys by: (Electronic resources)

Recent advances in mechanics of functional materials and structures = proceedings of the 8th Asian Conference on Mechanics of Functional Materials and Structures 2022 / by: (Electronic resources)

Design and modeling of mechanical systems - VI = proceedings of the 10th Conference on Design and Modeling of Mechanical Systems, CMSM'2023, December 18-20, 2023, Hammamet, Tunisia.. Volume 2,. Materials engineering and manufacturing / by: (Electronic resources)

Progress in hydrogen energy, fuel cells, nano-biotechnology and advanced, bioactive compounds by: (Electronic resources)

Sustainable development research in materials and energy = advancement of science and technology / by: (Electronic resources)

Introduction to electromobility = technology, best practice, energy and environment / by: (Electronic resources)

70 years of China's bridges by: (Electronic resources)

Advanced composites = applications for Covid-19 and beyond / by: (Electronic resources)

Engineering materials = fundamentals, processing and properties / by: (Electronic resources)

Design load allowables for composite plates exposed to thermomechanical loads by: (Electronic resources)

Failure in aircraft materials by: (Electronic resources)

Handbook of non-metallic inclusions in steels by: (Electronic resources)

Sinter plants = evolution, challenges, and future perspectives / by: (Electronic resources)

Sustainable development research in materials and renewable energy engineering = advancements of science and technology / by: (Electronic resources)

Introduction to electrospinning and nanofiber by: (Electronic resources)

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna by: (Electronic resources)

Advances in materials engineering = select proceedings of ICAFAMMT 2024 / by: (Electronic resources)

Materials processing fundamentals 2025 = thermodynamics and rate phenomena / by: (Electronic resources)

Advances in ceramic materials and processing by: (Electronic resources)

Smart Innovation in Mechanical Engineering = select proceedings of ICOME 2023, 30-31 August, Bali, Indonesia / by: (Electronic resources)

Introduction to elasticity, fracture and fatigue by: (Electronic resources)

Biodegradable PBAT plastics and composites by: (Electronic resources)

Advances in materials and processing = proceedings of MET and HTS 2022 / by: (Electronic resources)

Modeling of Z-pinned carbon fiber-reinforced polymer (CFRP) composite = curing process and mechanical properties / by: (Electronic resources)

The influence of environment on mechanical characteristics of key semiconductor components by: (Electronic resources)

Fe-based amorphous alloys with high glass forming ability by: (Electronic resources)

Magnesium-based hydrogen storage materials by: (Electronic resources)

Applications of nanomaterials in civil and environmental engineering = towards sustainable development and environment remediation / by: (Electronic resources)

Critical infrastructure protection = advanced technologies for crisis prevention and response / by: (Electronic resources)

Recent advances on waterborne epoxy coatings = synthesis, properties and applications / by: (Electronic resources)

Dictionary of concrete technology by: (Electronic resources)

Advances in nanomaterials for detection, control, and removal of environmental pollutants by: (Electronic resources)

Physics and mechanics of new materials and their applications = proceedings of the International Conference PHENMA 2024 / by: (Electronic resources)

Engineering design applications VII by: (Electronic resources)

Challenges and innovations in 3D printed bio-organs and their materials by: (Electronic resources)

Non-destructive methodologies and adapted signal processing techniques in the field of cultural heritage by: (Electronic resources)

Ten materials that shaped our world by: (Electronic resources)

Electronic materials innovations and reliability in advanced memory packaging by: (Electronic resources)

Novel materials and technologies for energy and environment applications. = select proceedings of NMTE2A 2024 /. Volume 1 by: (Electronic resources)

Biomedical applications of microbial nanomaterials by: (Electronic resources)

Smart fluid technologies by: (Electronic resources)

Metal science in modern manufacturing technologies by: (Electronic resources)

Advancements in materials processing technology. = select proceedings of AMPT 2023 /. Volume 3 by: (Electronic resources)

Dynamic behavior of materials and mechanics of fracture, fatigue, failure & damage evolution. = proceedings of the 2024 Annual Conference on Experimental and Applied Mechanics /. Volume 1 by: (Electronic resources)

Advances in materials and manufacturing = select proceedings of ICDMT 2024 / by: (Electronic resources)

Recent trends in materials and devices = select proceedings of ICRTMD 2023 / by: (Electronic resources)

Magnesium-based syntactic, metastable and nano-composites by: (Electronic resources)

Proceedings of 2025 16th International Conference on Materials and Manufacturing Technologies by: (Electronic resources)

Selected papers from ICIR EUROINVENT -- 2025 = International Conference on Innovative Research / by: (Electronic resources)

Advanced materials and manufacturing = select proceedings of ICEMSMCI 2024 / by: (Electronic resources)

Proceeding of the 9th International Symposium on Lifeline and Infrastructure Earthquake Engineering by: (Electronic resources)

Biodegradable metallic materials = design, development and characterization / by: (Electronic resources)

High-performance textile composites = characteristics and applications / by: (Electronic resources)

Recent advances in materials and manufacturing science = select proceedings of ICRAM 2025 / by: (Electronic resources)