Applied Mechanics.
Overview
Works: | 573 works in 0 publications in 0 languages |
---|
Titles
Cutoffs in chaotic map mixing and topology optimization of microfluidic channels.
by:
(Language materials, printed)
Micromechanics of solid-surface contact suspension and its role in friction.
by:
(Language materials, printed)
Vibration-based damage detection of structures using signal analysis methods.
by:
(Language materials, printed)
Methods for increased computational efficiency of multibody simulations.
by:
(Language materials, printed)
Aeroelastic analysis of rotor blades using three dimensional multibody dynamic analysis.
by:
(Language materials, printed)
Experimental study of complex flow and turbulence structure around a turbomachine rotor blade operating behind a row of Inlet Guide Vanes (IGVS).
by:
(Language materials, printed)
Mechanical characterization of nanoscale metal films on compliant substrates.
by:
(Language materials, printed)
Adaptive multiscale modeling of polymeric materials using goal-oriented error estimation, Arlequin coupling, and goals algorithms.
by:
(Language materials, printed)
Biomechanics of blunt liver injury: Relating internal pressure to injury severity and developing a constitutive model of stress-strain behavior.
by:
(Language materials, printed)
Identification of geotechnical dynamical systems and function estimation: Modeling and estimation.
by:
(Language materials, printed)
Processing, characterization, and modeling of nanoparticle reinforced fiber composites.
by:
(Language materials, printed)
The aeroelastic dynamics of a NACA 0012 airfoil oscillating in pitch at transitional Reynolds numbers.
by:
(Electronic resources)
Three-dimensional multiphase flow modeling of spray cooling using parallel computing.
by:
(Electronic resources)
A group theoretic and statistical mechanical treatment of chainlike structures.
by:
(Electronic resources)
Three-dimensional modal, dynamic, and wave propagation analyses of functionally graded solids.
by:
(Electronic resources)
Kinematics and kinetics of granular mixture: Experimental and numerical studies.
by:
(Electronic resources)
Dynamic considerations for composite metal-rubber laminate acoustic power coupling bellows with application to thermoacoustic refrigeration .
by:
(Electronic resources)
Homogenization-based constitutive models for viscoplastic porous media with evolving microstructure.
by:
(Electronic resources)
Fluid-structure interactions in the vibrations of rotating and stationary disks.
by:
(Electronic resources)
Residual stress development and effect on the piezoelectric performance of sol-gel derived lead zirconate titanate (PZT) thin films.
by:
(Electronic resources)
Post-cracking characteristics of high performance fiber reinforced cementitious composites.
by:
(Electronic resources)
Estimation and control of the discretization error in thehp finite element method (Spanish text).
by:
(Language materials, printed)
Thermo-micromechanical damage modeling for airfield concrete pavement.
by:
(Language materials, printed)
Testing and simulation of composite laminates under impact loading.
by:
(Language materials, printed)
Residual stress effects on fatigue life via the stress intensity parameter, K.
by:
(Language materials, printed)
A kinematic and kinetic analysis of the overgrip giant swing on the uneven parallel bars.
by:
(Language materials, printed)
PART I. SYMMETRY BREAKING OF WATER WAVES. PART II. ON THE SUPERHARMONIC INSTABILITY OF SURFACE WATER WAVES.
by:
(Language materials, printed)
Forced emissions of nonlinear water waves in channels of arbitrary shape.
by:
(Language materials, printed)
A finite element approach to the dynamic simulation of multibody systems.
by:
(Language materials, printed)
Absolute nodal coordinate formulation: Elastic forces and application to wheel/rail interaction.
by:
(Language materials, printed)
Numerical solution of inverse and optimization problems for designing steady forming processes.
by:
(Language materials, printed)
Optimal design and fabrication of micro-electro-mechanical structures: With applications to comb drives.
by:
(Language materials, printed)
Design of electrostatic actuators to tune the effective stiffness of micro-electro-mechanical systems.
by:
(Language materials, printed)
The boundary element analysis of thin and thick plates with crack like defects.
by:
(Language materials, printed)
A parallel logarithmic time complexity algorithm for the simulation of general multibody system dynamics.
by:
(Language materials, printed)
On the eigenvalue problems of Poiseuille flows in a circular pipe.
by:
(Language materials, printed)
The effect of a shortening of the full golf backswing on club head velocity at ball impact.
by:
(Language materials, printed)
Effects of moment of inertia on swing speed of baseball and softball bats.
by:
(Language materials, printed)
The effects of verbal cueing on kinematics and performance factors in learning a golf swing (motor learning).
by:
(Language materials, printed)
Direct numerical simulation of a translating vapor bubble with phase change.
by:
(Language materials, printed)
Micromechanical modeling of the interaction of diffusion mechanisms and surface energy with nonlinear material deformation: Applications to powder densification and void growth.
by:
(Language materials, printed)
A universal model of droplet vaporization applicable to supercritical conditions.
by:
(Language materials, printed)
A computer controlled system for earthquake protection of structures.
by:
(Language materials, printed)
Three dimensional dynamic analysis of the human hand for predicting tendon, ligament and nerve wear in the carpal tunnel during typing.
by:
(Language materials, printed)
On the motion of flexible strings and filaments in inertial and viscous regimes.
by:
(Language materials, printed)
Vibration-based structural damage identification enhancement via piezoelectric circuitry network and active feedback control.
by:
(Language materials, printed)
Design, modeling, fabrication and testing of a membrane piezoelectric tactile sensor with four sensing elements.
by:
(Language materials, printed)
Optimally turned secondary system with viscous damping for vibration suppression in torsional systems.
by:
(Language materials, printed)
Simulation of wrist kinematics on the basis of a rigid body spring model.
by:
(Language materials, printed)
A classical interpretation of observed switching statistics in microwave-driven Josephson junction systems.
by:
(Language materials, printed)
Development and characterization of coal utilization byproducts based automotive brake lining composite materials.
by:
(Language materials, printed)
Explicit buckling analysis of fiber-reinforced plastic (FRP) composite structures.
by:
(Language materials, printed)
Influence of fundamental material properties and air void structure on moisture damage of asphalt mixes.
by:
(Language materials, printed)
Damage initiation, progression and failure of polymer matrix composites due to manufacturing induced defects.
by:
(Language materials, printed)
Viscoelasticity at microscopic and macroscopic scales: Characterization and prediction.
by:
(Language materials, printed)
Attenuation of ultrasonic Lamb waves with applications to material characterization and condition monitoring.
by:
(Language materials, printed)
Parallel high-order methods for deterministic and stochastic CFD and MHD problems.
by:
(Language materials, printed)
Analysis of linear elasticity and non-linearity due to plasticity and material damage in woven and biaxial braided composites.
by:
(Language materials, printed)
Multi-scale nonlinear constitutive models using artificial neural networks.
by:
(Language materials, printed)
Nonlinear micromechanics-based finite element analysis of the interfacial behaviour of FRP-strengthened reinforced concrete beams.
by:
(Language materials, printed)
Locally-exact homogenization theory for periodic materials with unidirectional reinforcements.
by:
(Language materials, printed)
Mechanical behavior of strain-stiffening rubber-like nonlinearly elastic materials.
by:
(Language materials, printed)
Directional distortional hardening in plasticity based on thermodynamics.
by:
(Language materials, printed)
Parallel MPI/FORTRAN finite element symmetrical/unsymmetrical Domain Decomposition.
by:
(Language materials, printed)
Small scale contact behavior in metallic films: Indentation and adhesion experimental studies.
by:
(Language materials, printed)
Three-dimensional computational modeling of polycrystalline materials.
by:
(Language materials, printed)
Numerical modeling of homogeneous and bimaterial crack tip and interfacial cohesive zones with various traction-displacement laws.
by:
(Language materials, printed)
Investigation and prediction of solder joint reliability for ceramic area array packages under thermal cycling, power cycling, and vibration environments.
by:
(Language materials, printed)
Interaction between a spherical particle and wall-bounded flows at finite Reynolds number.
by:
(Language materials, printed)
Development of a temperature dependent, non-linear cohesive zone model for laser induced fracture.
by:
(Language materials, printed)
Finite element modeling of flow instabilities in arc plasma torches.
by:
(Language materials, printed)
High temperature properties of HFPE-II-52 polyimide resin and composites.
by:
(Language materials, printed)
Real-time reduced large-deformation models and distributed contact for computer graphics and haptics.
by:
(Language materials, printed)
Exploring and exploiting resonance in coupled and/or nonlinear microelectromechanical oscillators.
by:
(Language materials, printed)
Optimal control problems on stratified domains: Application to single-station multiclass queueing systems with finite buffers and overflow costs.
by:
(Language materials, printed)
Efficient methods for non-linear thermochemical analysis of composite structures undergoing autoclave processing.
by:
(Language materials, printed)
Design of CFD code using high level programming paradigms: Free surface flows with arbitrarily moving rigid bodies.
by:
(Language materials, printed)
Mathematical modeling of interfacial hydrodynamic phenomena in some liquid-fluid systems.
by:
(Language materials, printed)
Mechanical behaviors of PECVD dielectric films for MEMS applications.
by:
(Language materials, printed)
On the effective behavior, microstructure evolution, and macroscopic stability of elastomeric composites.
by:
(Language materials, printed)
Thermal modeling of advanced manufacturing technologies: Grinding, laser drilling, and solid freeform fabrication.
by:
(Language materials, printed)
Propagation of a penny-shaped hydraulic fracture in an impermeable rock.
by:
(Language materials, printed)
A boundary spectral method for elasticity problems with spherical inhomogeneities.
by:
(Language materials, printed)
Three problems in nonlinear dynamics with 2:1 parametric excitation.
by:
(Language materials, printed)
An iterative method for the interaction of large number of rigid plates on an elastic half-space.
by:
(Language materials, printed)
Two coupled oscillator models: The Millennium Bridge and the Chimera State.
by:
(Language materials, printed)
The formation, propagation and stability of self-sustained detonation waves in gaseous mixtures, condensed-phase explosives and media with hydraulic resistance.
by:
(Language materials, printed)
Shape stability and violent collapse of microbubbles interacting with acoustic waves and shocks.
by:
(Language materials, printed)
An atomic interaction based continuum model for computational multiscale contact mechanics.
by:
(Language materials, printed)
Adjoint-based inverse determination of shear modulus and intraocular pressure.
by:
(Language materials, printed)
Earthquake loss and risk estimation of buildings by Monte Carlo simulation.
by:
(Language materials, printed)
Passive broadband targeted energy transfers and control of self-excited vibrations.
by:
(Language materials, printed)
Stabilized space-time fluid-structure interaction techniques with the continuum element.
by:
(Language materials, printed)
Arterial fluid mechanics computations with the stabilized space-time fluid-structure interaction techniques.
by:
(Language materials, printed)
Experimental observations of shear band nucleation and propagation in a bulk metallic glass using wedge-like cylindrical indentation.
by:
(Language materials, printed)
Performance Analysis of Iterative Decoding Algorithms with Memory.
by:
(Language materials, printed)
A mixed unsplit-field PML-based scheme for full waveform inversion in the time-domain using scalar waves.
by:
(Language materials, printed)
High-performance direct solution of finite element problems on multi-core processors.
by:
(Language materials, printed)
Simulation, synthesis, and characterization of hydrogels and nanocomposite gels.
by:
(Language materials, printed)
Capillary dynamics of drops and bubbles: Splashing, wetting, electrocoalescence, inverse coarsening, and thin films.
by:
(Language materials, printed)
Numerical simulation of stress generation and whisker growth in tin films.
by:
(Language materials, printed)
Nonlinear effects on dynamic response of pavements using the nondestructive testing techniques.
by:
(Language materials, printed)
Analysis and simulation of mechanical systems with multiple frictional contacts.
by:
(Language materials, printed)
Dynamics of randomly perturbed nonlinear structural and mechanical systems with resonances.
by:
(Electronic resources)
A finite element investigation of sustained service loads on an isogrid structure.
by:
(Electronic resources)
Design, modeling and experimental investigation of wire mesh vibration dampers.
by:
(Electronic resources)
Nonlinear modal analysis based on invariant manifolds: Application to rotating blade systems.
by:
(Electronic resources)
Damage analysis of particulate biocomposites using finite element technique.
by:
(Electronic resources)
Mechanical properties of particle systems using a molecular dynamics approach inspired by continuum homogenization.
by:
(Electronic resources)
A ceramic damage model for analyses of multi-layered ceramic-core sandwich panels under blast wave pressure loading.
by:
(Electronic resources)
Calibration of equations of state and design of high-pressure shock wave experiments using numerical simulation.
by:
(Electronic resources)
Development of a mixed shell element for 7-parameter formulation and identification of lowest eigenvalues.
by:
(Electronic resources)
Design and simulation of face-hobbed hypoid gears, and tooth contact analysis by boundary element method.
by:
(Electronic resources)
Statistical error analysis in numerical solutions of shock physics problems.
by:
(Electronic resources)
Sliding mode control of a reusable launch vehicle using sliding mode observers and gain adaptation.
by:
(Electronic resources)
A noninvasive technique for determining joint pathology: Application to the knee joint.
by:
(Electronic resources)
Numerical simulation of nanopulse penetration of biological matter using the z-transform.
by:
(Electronic resources)
Modeling of high strain rate and strain localization in FCC single crystals: Multiscale dislocation dynamics analyses.
by:
(Electronic resources)
Boundary conditions in the vicinity of the contact line at a vertically oscillating plate: An experimental investigation.
by:
(Electronic resources)
A computational approach for investigating unsteady turbine heat transfer due to shock wave impact.
by:
(Electronic resources)
Deterministic and random analysis of systems with hysteresis using the Preisach formalism.
by:
(Electronic resources)
Refinement, implementation and validation of assembly cost model for printed circuit assemblies.
by:
(Electronic resources)
Advanced computational techniques for the analysis of three-dimensional fluid-structure interaction with cavitation.
by:
(Electronic resources)
High strain gradient deformation states in elastic-plastic single crystals: Theory, simulations and experiments.
by:
(Electronic resources)
New boundary element methods for solid mechanics: Integration methodology and new Green's functions.
by:
(Electronic resources)
Modeling and finite element analysis of welding distortions and residual stresses in large and complex structures.
by:
(Electronic resources)
Atomistic modeling of the aluminum and iron oxide material system using classical molecular dynamics.
by:
(Electronic resources)
Finite element simulation of creep buckling of CIPP liners under external pressure.
by:
(Electronic resources)
Mechanical behavior of metallic glasses and metallic glass matrix composites.
by:
(Electronic resources)
Parameterized locally invariant manifolds: A tool for multiscale modeling.
by:
(Electronic resources)
Experimental and analytical investigation of dynamic compressive behavior of intact and damaged ceramics.
by:
(Electronic resources)
Plasticity in copper thin films: An experimental investigation of the effect of microstructure.
by:
(Electronic resources)
Modeling variable friction and slip weakening of localized geomaterials using an embedded strong discontinuity finite element.
by:
(Electronic resources)
Predictions of the inelastic seismic response of concrete structures including shear deformations and anchorage slip.
by:
(Electronic resources)
Three-dimensional finite element stress analysis of a polymeric orthotic device: Biomechanics of the ankle-foot orthosis.
by:
(Electronic resources)
Thermomechanical analysis and fatigue life prediction of plated-through-holes in multilayered printed wiring boards.
by:
(Electronic resources)
In vitro testing of cadaveric joints using robotics: Robotic control development and application to ovine stifle testing.
by:
(Electronic resources)
Scalable substructuring methods for high performance structural analysis.
by:
(Electronic resources)
Reliability analysis of fatigue under random loading considering modeling updating through inspection in the MARTA bridge system.
by:
(Electronic resources)
Mathematical modeling of separated two-phase turbulent reactive flows using a filtered mass density function approach for large eddy simulation.
by:
(Electronic resources)
A nonlocal model for coupled damage-plasticity incorporating gradients of internal state variables at multiscales.
by:
(Electronic resources)
Probabilistic construction and numerical analysis of model verification and validation.
by:
(Electronic resources)
Modeling, analysis, and experimental investigation of root canal instrumentation process.
by:
(Electronic resources)
A simple and versatile iterative implicit solver for incompressible flows with particular emphasis on fixed and free curved boundaries.
by:
(Electronic resources)
Discovering the Brazilian Air Force squadron commanders' perceptions regarding organizational accidents.
by:
(Electronic resources)
The performance of multivariate quality-control charts for autocorrelated bivariate data.
by:
(Electronic resources)
Dynamic property characterization of ionic polymer metal composite (IPMC).
by:
(Electronic resources)
Significance of orientation and determination of cummulative damage measures during cyclic testing of human thoracolumbar spine.
by:
(Electronic resources)
Modeling and verification of cryogenic permeability of graphite epoxy laminates with delaminations and stitch cracks.
by:
(Electronic resources)
Finite element investigation of joint behavior and composite pressure vessel performance for pyramid and inverted pyramid joints.
by:
(Electronic resources)
Development and applications of film-based and digital holographic particle image velocimetry for both large and small scale flow measurements.
by:
(Electronic resources)
A neural model of how the cortical subplate coordinates the laminar development of orientation and ocular dominance maps.
by:
(Electronic resources)
A probabilistic analysis of forced oscillators, with application to neuronal response reliability.
by:
(Electronic resources)
Free vibration analysis of cyclic symmetric structures by finite element and boundary element methods.
by:
(Electronic resources)
A thermodynamic damage mechanics theory and experimental verification for thermomechanical fatigue life prediction of microelectronics solder joints.
by:
(Electronic resources)
Heterogeneous element: A new finite element method for the micro-stress analysis of composites.
by:
(Electronic resources)
New developments in dynamics and computational finite deformation formulations: Methodology, algorithms, and analysis.
by:
(Electronic resources)
Energy finite element method for vibration analysis of stiffened plates under fluid loading.
by:
(Electronic resources)
Parallel processing of finite strain, materially nonlinear and incompressible finite element analysis problems.
by:
(Electronic resources)
Theory, modeling, and simulation of structural and functional materials: Micromechanics, microstructures, and properties.
by:
(Electronic resources)
Hybrid finite-volume/transported PDF method for the simulation of turbulent reactive flows.
by:
(Electronic resources)
Boundary element method for thermomechanical analysis of sliding contact.
by:
(Electronic resources)
Extended finite element and level set methods with applications to growth of cracks and biofilms.
by:
(Electronic resources)
An inelastic analysis methodology for bonded joints with shear deformable, anisotropic adherends.
by:
(Electronic resources)
New formulation for finite element modeling electrostatically driven microelectromechanical systems.
by:
(Electronic resources)
An optimization approach for two-dimensional finite element mesh smoothing.
by:
(Electronic resources)
The effects of combined torsion and bending loads on fresh human cadaver femurs.
by:
(Electronic resources)
Two-dimensional measurements of dynamic cumulative spine loading in real-time.
by:
(Electronic resources)
Finite element concept modeling methodologies supporting the design of a pickup box.
by:
(Electronic resources)
Determination of continuum and wave propagation characteristics for geometrically engineered materials.
by:
(Electronic resources)
Development and validation of a computer model of the equine tarsal joint.
by:
(Electronic resources)
Three-dimensional nonlinear analysis of tall irregular steel buildings subject to strong ground motion.
by:
(Electronic resources)
Expressing preferences with price-vector agents in combinatorial auctions.
by:
(Electronic resources)
Phase-field models of microstructure evolution in a system with elastic inhomogeneity and defects.
by:
(Electronic resources)
Thermal and power integrity analysis and optimization for high performance VLSI.
by:
(Electronic resources)
The actions of the free limbs and their relationships with performance in the triple jump.
by:
(Electronic resources)
Robust active vibration control of thin plate systems with parameters uncertainties.
by:
(Electronic resources)
The wear and thermo-elastohydrodynamic behavior of thrust washer bearings under non-axisymmetric loads.
by:
(Electronic resources)
Experimental study and analytical modeling of translayer fracture in pultruded FRP composites.
by:
(Electronic resources)
Integrated micromechanical-structural framework for the nonlinear viscoelastic behavior of laminated and pultruded composite materials and structures.
by:
(Electronic resources)
Adaptive optimal control design for stable vibration attenuation of active constrained layer damping beam structure.
by:
(Electronic resources)
A thermodynamic field formulation for anodic bonding of microelectromechanical systems (MEMS).
by:
(Electronic resources)
A multilayer fabrication technique for three-dimensional metallic microstructures.
by:
(Electronic resources)
Mechanical design of embeddable micro-smart sensing systems (Embedded conductive film).
by:
(Electronic resources)
The strain gradient effect on material behavior at the micron and submicron scales.
by:
(Electronic resources)
Acoustic generation of femtoliter to picoliter droplets using two-dimensional micromachined microdroplet ejector arrays.
by:
(Electronic resources)
Thin film transistors for macroelectronics: Devices, substrates, and processes.
by:
(Electronic resources)
Muscle and force characteristics in stable and unstable exercise protocols.
by:
(Electronic resources)
Robotic walking in natural terrain: Gait planning and behavior-based control for statically-stable walking robots.
by:
(Electronic resources)
Theoretical and experimental studies on dynamic impact on brittle solids.
by:
(Electronic resources)
Guided waves technique for measurement of contained stress in uniform slender elastic bodies.
by:
(Electronic resources)
On an accelerated fatigue-testing technique using piezoelectric actuators.
by:
(Electronic resources)
Experimental, theoretical, and computational study of compressed thin-film diaphragms.
by:
(Electronic resources)
Use of piezoelectric actuators to effect snap-through behavior of unsymmetric composite laminates.
by:
(Electronic resources)
Numerical modeling of elastic materials with inclusions, holes, and cracks.
by:
(Electronic resources)
The development of advanced materials: Negative Poisson's ratio materials, high damping and high stiffness materials, and composites with negative stiffness inclusions and their stability.
by:
(Electronic resources)
Development of an iterative method for structural damage detection and a stochastic model for the random impact series method in modal testing.
by:
(Electronic resources)
Interior elastodynamics inverse problems: Shear wave speed recovery in transient elastography using level set based inversion of arrival times.
by:
(Electronic resources)
Localization properties of three-invariant plasticity models at finite strain.
by:
(Electronic resources)
Effects of damage and thermal residual stresses on the overall elastoplastic behavior of particle-reinforced metal matrix composites.
by:
(Electronic resources)
Theory of instability and nonlinear evolution of self-sustained detonation waves.
by:
(Electronic resources)
A discontinuous Galerkin method for two- and three-dimensional shallow-water equations.
by:
(Electronic resources)
Experiments on oscillating flows past a circular cylinder bounded by two parallel endplates.
by:
(Electronic resources)
Simulating the effects of ship motion on postural stability using articulated dynamic models.
by:
(Electronic resources)
Orientation of rigid bodies freefalling in Newtonian and non-Newtonian liquids.
by:
(Electronic resources)
Experimental and finite element study of the design parameters of an aluminum baseball bat.
by:
(Electronic resources)
A dynamic programming model integrating the analytical hierarchy process and treating the transition probabilities as estimates.
by:
(Electronic resources)
Finite element analysis of stresses in Berkovich, Vickers and Knoop indentation for densifying and non-densifying glasses.
by:
(Electronic resources)
Shock attenuation during heel-strike, forefoot-strike, and spring-boot running.
by:
(Electronic resources)
Total strain based bond/slip and shear/friction membrane model for finite element analysis of reinforced concrete.
by:
(Language materials, printed)
Constraint-based fracture mechanics analysis of cylinders with circumferential cracks.
by:
(Language materials, printed)
Modeling of sheet metal fracture via cohesive zone model and application to spot welds.
by:
(Language materials, printed)
Mathematical modeling, simulation, and analysis of two problems in interfacial fluid dynamics.
by:
(Language materials, printed)
The integrated implementation of surgical simulations through modeling by means of imaging, comprehension, visualization, deformation, and collision detection in virtual environments.
by:
(Language materials, printed)
Adaptation de maillage pour la simulation numerique du tourbillon marginal sur une aile tridimensionnelle.
by:
(Language materials, printed)
Frequency downshifting in surface waves and free surface flows without waves.
by:
(Language materials, printed)
The embedding integral equation method for potential and acoustic problems.
by:
(Electronic resources)
Effects of inelastic off-fault deformation on the dynamics of earthquake rupture and branch fault activation.
by:
(Electronic resources)
A meshless method with enriched basis functions for singularity problems.
by:
(Electronic resources)
Modeling spanwise nonuniformity in the cross-sectional analysis of composite beams.
by:
(Electronic resources)
Observation and prediction of the deformation and fracture of shape memory alloys.
by:
(Electronic resources)
Asymptotic analysis of singular stress fields near contact boundaries in anisotropic elastic media.
by:
(Language materials, printed)
Probabilistic finite element methods for transient analysis of nonlinear continua.
by:
(Language materials, printed)
SHEAR STRESS CONCENTRATION NEAR THE EDGE OF A THIN FILM DEPOSITED ON A SUBSTRATE.
by:
(Language materials, printed)
An analysis of thin film stress with application to thermal oxidation of silicon.
by:
(Language materials, printed)
Mechanical modeling of microelectronic packaging components for accelerated tests.
by:
(Language materials, printed)
A geometrically nonlinear stress-deflection relation for thin film/substrate systems.
by:
(Language materials, printed)
Determining residual stresses in thin film materials by using micromachined structures.
by:
(Language materials, printed)
Mechanical characterization of thin film structures using a laser spallation technique.
by:
(Language materials, printed)
Influence of a backpack load on selected parameters of walking gait of non-disabled men and women.
by:
(Language materials, printed)
The effects of shoulder plyometric training on proprioception and muscle performance characteristics.
by:
(Language materials, printed)
Oxygen uptake and leg blood flow at the onset of kicking exercise in humans.
by:
(Language materials, printed)
Modeling of complex systems using nonlinear, flexible multibody dynamics.
by:
(Language materials, printed)
Self-regular BEM approaches and error estimation for linear elastic fracture mechanics in two dimensions.
by:
(Language materials, printed)
Simulation and analysis of micro-electro-mechanical systems (MEMS) with applications of sensitivity analysis and optimization.
by:
(Language materials, printed)
Electrostatic comb drive for resonant sensor and actuator applications.
by:
(Language materials, printed)
New design languages based on spatial and structural aspects of form: A formal generative specification.
by:
(Language materials, printed)
Some parallel linear and nonlinear Schwarz methods with applications in computational fluid dynamics.
by:
(Language materials, printed)
Role of geometric complexities and off-fault damage in dynamic rupture propagation.
by:
(Language materials, printed)
The dynamics of filaments of complex liquids analyzed by continuum and mixed continuum-stochastic methods.
by:
(Language materials, printed)
Homogenization and bridging multi-scale methods for the dynamic analysis of periodic solids.
by:
(Language materials, printed)
Characterization, modeling and size effect of concrete-epoxy interfaces.
by:
(Language materials, printed)
Accelerated ageing tests and long-term prediction models for durability of FRP bars in concrete.
by:
(Language materials, printed)
Carbon nanotube mechanics: Continuum model development from molecular mechanics virtual experiments.
by:
(Language materials, printed)
Simulating the durability mechanics of cement composites: Methods development.
by:
(Language materials, printed)
Torsional fatigue behavior of adhesively bonded aluminum-aluminum tubes with NDT assessment.
by:
(Language materials, printed)
Influence of extra mass on performance and inter-segmental coordination in open kinetic chain motions.
by:
(Language materials, printed)
Study of the fracture behavior of concrete by the development and application of the nonlinear finite element code incorporating the composite damage mechanics theory for brittle materials.
by:
(Language materials, printed)
A comparison of the sprint start using traditional starting blocks and the Moye starting system.
by:
(Language materials, printed)
HYDRAULIC FRACTURING IN POROUS AND NONPOROUS ROCK AND ITS POTENTIAL FOR DETERMINING IN-SITU STRESSES AT GREAT DEPTH.
by:
(Language materials, printed)
Small scale stochastic dynamics for particle image velocimetry applications.
by:
(Language materials, printed)
Tolerance analysis of compliant metal plate assemblies considering welding distortion.
by:
(Language materials, printed)
A mathematical and computational multiscale clothing modeling framework.
by:
(Language materials, printed)
On the response of a spherical particle to unsteady flows at finite Reynolds numbers.
by:
(Language materials, printed)
Isogeometric analysis of turbulence and fluid-structure interaction.
by:
(Language materials, printed)
An artificial neural network method for solving boundary value problems with arbitrary irregular boundaries.
by:
(Language materials, printed)
Nonlinear computational models for composite materials using homogenization.
by:
(Language materials, printed)
Lagrangian blocks on Eulerian mesh for shallow-water wave computations.
by:
(Language materials, printed)
Failure analyses of polymer matrix composite (PMC) honeycomb sandwich joint panels.
by:
(Electronic resources)
Analysis of cylindrical composite shells: Examining the effects of asymmetric construction and a rounded-square cross-section.
by:
(Electronic resources)
Variational asymptotic modeling of composite dimensionally reducible structures.
by:
(Electronic resources)
Development of the MIN-N family of triangular anisoparametric Mindlin plate elements.
by:
(Electronic resources)
Thermomechanical analysis of multilayered microelectronics packaging: Modeling and testing.
by:
(Electronic resources)
The effect of boundary conditions on the response of laminated thick composite plates and shells.
by:
(Electronic resources)
Reusable launch vehicle attitude controls using time varying sliding modes.
by:
(Electronic resources)
Fluid mechanics and mass transfer in rotating cylindrical vessels: A numerical and experimental study.
by:
(Electronic resources)
Fabrication, high-strain-rate constitutive behavior, and dynamic failure of MMCs.
by:
(Electronic resources)
A new superposition framework for discrete dislocation plasticity: Methodology and application to inhomogeneous boundary value problems.
by:
(Electronic resources)
Anti-diffusive flux corrections for high order finite difference WENO schemes.
by:
(Electronic resources)
Meshfree methods and extended finite element methods for arbitrary discontinuities.
by:
(Electronic resources)
Elastic wave scattering by partially debonded or partially coated fibers.
by:
(Electronic resources)
An embedding method for simulation of immobilized enzyme kinetics and transport in sessile hydrogel drops.
by:
(Electronic resources)
Methodology for vibration-based highway bridge structural health monitoring.
by:
(Electronic resources)
Small scale contact and adhesion of soft materials in nano- and bio-systems.
by:
(Electronic resources)
Material modeling and structural analysis with the microplane constitutive model.
by:
(Electronic resources)
Applications of the boundary element method to elastic wave scattering problems.
by:
(Electronic resources)
Theory for the eddy current characterization of materials and structures: Applications to nondestructive evaluation and geophysics.
by:
(Electronic resources)
Multi-flexible-body analysis for application to wind turbine control design.
by:
(Electronic resources)
Identification of elastic basin properties by large-scale inverse earthquake wave propagation.
by:
(Electronic resources)
Potential field theory and its applications to classical mechanical problems.
by:
(Electronic resources)
Stress evolution during isothermal and isochronal annealing of sputtered nickel-titanium thin films on (100)-silicon.
by:
(Electronic resources)
Experimental and mathematical investigation of the human knee: Anatomy, kinematics and contact.
by:
(Electronic resources)
The contribution of rigid and wobbling masses of the leg to tibial response parameters following heel impact.
by:
(Electronic resources)
Structural damage evaluation: Theory and applications to earthquake engineering.
by:
(Electronic resources)
Nanotribological investigations of materials, coatings and lubricants for nanotechnology applications at high sliding velocities.
by:
(Electronic resources)
Ultrasonic guided wave tomography of pipes: A development of new techniques for the nondestructive evaluation of cylindrical geometries and guided wave multi-mode analysis.
by:
(Electronic resources)
Discontinuous Galerkin methods for approximating the solutions to problems in nonlinear elasticity.
by:
(Language materials, printed)
Interface fracture behavior of rehabilitated concrete infrastructures using engineered cementitious composites.
by:
(Electronic resources)
Development, simulation, and calibration of a flush air data system for a transatmospheric vehicle.
by:
(Language materials, printed)
Flexural performance of glass fiber reinforced composite sandwich panels.
by:
(Language materials, printed)
Mixed circuit and device simulation for analysis, design and optimization of optoelectronic, radio frequency and high speed semiconductor devices.
by:
(Electronic resources)
Numerical simulation of adiabatic shear bands and crack propagation in thermoviscoplastic materials.
by:
(Electronic resources)
A Fourier series method for polygonal domains; large element computation for plates.
by:
(Electronic resources)
A higher-order direct boundary integral-displacement discontinuity method for fracture propagation in layered elastic media.
by:
(Electronic resources)
The effect of height and feet position on EMG and vertical force peak when lifting ITH rods.
by:
(Electronic resources)
Measurement of the mechanical properties of copper thin films by microbeam bending.
by:
(Electronic resources)
Finite crystal elasticity for curved single layer lattices: Applications to carbon nanotubes.
by:
(Electronic resources)
Experimental and numerical investigations on the durability and fracture mechanics of the bonded systems for microelectronics application.
by:
(Electronic resources)
Fracture of advanced polymer composites with nanofiber reinforced interfaces.
by:
(Electronic resources)
Effects of material microstructure and surface geometry on ultrasonic scattering and flaw detection.
by:
(Electronic resources)
Material characterization of thin coatings and failure analyses of flip-chip packages.
by:
(Electronic resources)
SOME TWO- AND ONE-DIMENSIONAL PROBLEMS IN FLUID MECHANICS BY A DIRECT APPROACH.
by:
(Electronic resources)
Theoretical and experimental analysis of the generalization ability of some statistical learning algorithms.
by:
(Electronic resources)
Dynamics of banded materials and structures: Analysis, design and computation in multiple scales.
by:
(Electronic resources)
Ballistic limit equation for hypervelocity impact on composite-orthotropic materials.
by:
(Electronic resources)
An engineering approach to the simulation of gross damage development in composite laminates.
by:
(Electronic resources)
Drag reduction by self-similar bending and a transition to forward flight by a symmetry-breaking instability.
by:
(Electronic resources)
Numerical modeling and analysis of static and ballistic behavior of multilayered/multiphase composite materials using detailed microstructural discretization.
by:
(Electronic resources)
A finite-element limit analysis for materials with pressure dependent yield behavior.
by:
(Electronic resources)
Acceleration constraints in modeling and control of nonholonomic systems.
by:
(Electronic resources)
Parametric study of miniature cyclone systems through numerical simulation.
by:
(Electronic resources)
Charge transport in quantum confined structures: Sub-60 nm wires and nanoparticle solar cells.
by:
(Language materials, printed)
An experimental investigation into the behavior of concrete elements rerofitted with NSM composite strips at elevated temperatures.
by:
(Language materials, printed)
Construction of a LBM-DEM Coupling System and its Applications in Modeling Fluid Particle Interaction in Porous Media Flow.
by:
(Language materials, printed)
Partitioned methods for coupled fluid flow and turbulence flow problems.
by:
(Language materials, printed)
Swelling and folding as mechanisms of 3D shape formation in thin elastic sheets.
by:
(Language materials, printed)
Measuring and modeling the mechanical properties of bicycle tires.
by:
(Language materials, printed)
Investigation of water droplet dynamics in PEM fuel cell gas channels.
by:
(Language materials, printed)
Fracture Mechanisms of Layer-By-Layer Polyurethane/Poly(Acrylic Acid) Nanocomposite.
by:
(Language materials, printed)
Extracting material response from simple mechanical tests on hardening-softening-hardening viscoplastic solids.
by:
(Electronic resources)
Simulations of the flow past an array of circular cylinders as a test of the immersed boundary method.
by:
(Electronic resources)
Crystal plasticity modeling of titanium-aluminum-vanadium alloy and its application in cyclic and fretting fatigue analysis.
by:
(Language materials, printed)
Fatigue damage control of structures using surface mounted piezoceramic actuators.
by:
(Language materials, printed)
A rapid engine prototyping methodology: Coupling engine geometry and flow field to engine performance prediction.
by:
(Language materials, printed)
Enhancement of efficiency and accuracy of near-field measurements.
by:
(Language materials, printed)
Behaviour of excavated rectangular piles (barrettes) in granitic saprolites.
by:
(Language materials, printed)
Environmentally enhanced crack growth in nickle-based superalloys.
by:
(Language materials, printed)
Computation of transient fully nonlinear free surface waves and wave-body interactions.
by:
(Language materials, printed)
Failure of microelectromechanical systems under dynamic loading: An experimental and numerical investigation.
by:
(Language materials, printed)
Accurate 3D shape and displacement measurement using a scanning electron microscope.
by:
(Language materials, printed)
A design optimization methodology for the front suspension of the 2007 Cooper Union mini Baja SAE vehicle.
by:
(Language materials, printed)
An evaluation of the effect of adsorbent properties on the performance of a solid sorption heat pump.
by:
(Language materials, printed)
Computations of viscous compressible flows in h, p, k finite element framework with variationally consistent integral forms.
by:
(Language materials, printed)
Amortissement d'une poutre par traitement viscoelastique contraint et analyse du regime transitoire suite a un impact.
by:
(Language materials, printed)
On the development and some application of a genetic algorithm based lookup table approach for efficient numerical integration in the method of finite spheres.
by:
(Language materials, printed)
Statistical properties of Gaussian reproducing kernel in density estimation.
by:
(Language materials, printed)
Nitsche Extended Finite Element Methods for Earthquake Simulation.
by:
(Language materials, printed)
A study of grain rotations and void nucleation in aluminum triple junctions using molecular dynamics and crystal plasticity.
by:
(Language materials, printed)
Use of a mechanical model to show the benefits of modern anatomical features of Homo sapiens for head stabilization during running.
by:
(Language materials, printed)
Computational methods for the dynamics and stress analysis of multibody track chains.
by:
(Electronic resources)
Generation of low-frequency Rayleigh waves for the spectral analysis of surface waves method.
by:
(Electronic resources)
Large eddy simulation of turbulent transport processes by a Least squares finite element method.
by:
(Electronic resources)
Deformability of thin films of electronic materials on polymer substrates.
by:
(Electronic resources)
Finite element analysis of the three-dimensional stress state at bi-material edges and corners.
by:
(Electronic resources)
Damage detection and identification in sandwich composites using neural networks.
by:
(Electronic resources)
An analytical study of electrorheological material based adaptive structures.
by:
(Electronic resources)
Frequency-time spectral analysis of helicopter turbulence and response in forward flight.
by:
(Electronic resources)
Observations on the kinetics of relaxation in epitaxial films grown on conventional and compliant substrates: A continuum simulation of dislocation glide near an interface.
by:
(Electronic resources)
Localization of deformation and inelastic deformation of pressure-sensitive dilatant materials.
by:
(Electronic resources)
Comparison of the performance of United States and Japanese aluminum bats using U.S. and Japanese test protocols.
by:
(Electronic resources)
The use of a compliant surface for supersonic flow over a compression ramp.
by:
(Electronic resources)
Numerical studies on receptivity and transition of Gortler instabilities in hypersonic boundary layers.
by:
(Electronic resources)
MEASUREMENT OF SIMULTANEOUS FLUCTUATING LOADS AT MULTIPLE LEVELS ON A MODEL OF A TALL BUILDING IN A SIMULATED URBAN BOUNDARY LAYER.
by:
(Electronic resources)
Differential surface kinematics for time-varying, surface-surface floating contact interactions.
by:
(Electronic resources)
Micromachined sensors and actuators for fluid mechanics research and high-speed flow control applications.
by:
(Electronic resources)
An extended finite element method with discontinuous enrichment for applied mechanics.
by:
(Electronic resources)
Multiple damage detection in structures using a coupled modal analysis and wavelet transform technique.
by:
(Electronic resources)
Vibrations of a rotating piezoelectric body and applications in gyroscopes.
by:
(Electronic resources)
A new O(N) method for modeling and simulating the behavior of a large number of dislocations in anisotropic linear elastic media.
by:
(Electronic resources)
Modeling and bifurcation analysis of thermo-mechano-chemical oscillations.
by:
(Electronic resources)
An ISO 9001:2000 and federal aviation Parts Manufacturer Approval-based quality manual.
by:
(Electronic resources)
Micromechanics of the hydrogen effect on plasticity and interfacial decohesion.
by:
(Electronic resources)
Mechanics of blast loading on post-mortem human and surrogate heads in the study of traumatic brain injury (TBI) using experimental and computational approaches.
by:
(Language materials, printed)
Analysis of the orbital motion of a general tethered satellite system.
by:
(Language materials, printed)
Nanomechanical and Electro-mechanical Characterization of Materials for Flexible Electrodes Applications.
by:
(Language materials, printed)
Bending, wrinkling, and folding of thin polymer film/elastomer interfaces.
by:
(Electronic resources)
Development of Hierarchical Optimization-based Models for Multiscale Damage Detection.
by:
(Electronic resources)
Coating with deformable and permeable surfaces: Focus on rotary screen coating.
by:
(Electronic resources)
Structural, magnetic and microstructural studies of composition-modified Sm-Co ribbons.
by:
(Electronic resources)
Dynamic behavior of acoustic metamaterials and metaconfigured structures with local oscillators.
by:
(Electronic resources)
Computational design of mechanical structures in elasticity using multiresolution analysis.
by:
(Electronic resources)
The effects of trunk muscle fatigue and load timing on spine mechanics during sudden hand loading.
by:
(Electronic resources)
Finite element modeling for dislocation generation in semiconductor crystals grown from the melt.
by:
(Electronic resources)
Numerical modeling of methane combustion on palladium catalyst for gas turbine applications.
by:
(Electronic resources)
Head-disk interface dynamics of ultra-low flying air bearing sliders for hard-disk drive applications.
by:
(Electronic resources)
A singular perturbation approach to a two-phase parabolic free boundary problem arising in flame propagation.
by:
(Electronic resources)
Development of a Self-Calibrated MEMS Gyrocompass for North-Finding and Tracking.
by:
(Language materials, printed)
Consistent Modeling of Hypersonic Nonequilibrium Flows using Direct Simulation Monte Carlo.
by:
(Language materials, printed)
Modeling of thermo-mechanical behavior of nitinol actuator for smart needle application.
by:
(Language materials, printed)
The Influence of Representative Volume Element Size, Soil Fabric, and Interparticle Elasto-Plasticity in Three-dimensional Ellipsoidal Discrete Element Modeling of Granular Assemblies.
by:
(Language materials, printed)
Residual Stresses Due to Circumferential Girth Welding of Austenitic Stainless Steel Pipes.
by:
(Language materials, printed)
Smoluchowski theory for concentrated colloidal dispersions far from equilibrium.
by:
(Language materials, printed)
Show more
Fewer
Subjects