語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
到查詢結果
[ author_sort:"ellingham, thomas k., jr." ]
切換:
標籤
|
MARC模式
|
ISBD
Sub-Critical Gas-Assisted Processing...
~
Ellingham, Thomas K., Jr.
FindBook
Google Book
Amazon
博客來
Sub-Critical Gas-Assisted Processing of Polymer Nanocomposites and Blends.
紀錄類型:
書目-電子資源 : Monograph/item
正題名/作者:
Sub-Critical Gas-Assisted Processing of Polymer Nanocomposites and Blends./
作者:
Ellingham, Thomas K., Jr.
出版者:
Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:
117 p.
附註:
Source: Dissertations Abstracts International, Volume: 80-08, Section: B.
Contained By:
Dissertations Abstracts International80-08B.
標題:
Nanotechnology. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13427816
ISBN:
9780438837959
Sub-Critical Gas-Assisted Processing of Polymer Nanocomposites and Blends.
Ellingham, Thomas K., Jr.
Sub-Critical Gas-Assisted Processing of Polymer Nanocomposites and Blends.
- Ann Arbor : ProQuest Dissertations & Theses, 2019 - 117 p.
Source: Dissertations Abstracts International, Volume: 80-08, Section: B.
Thesis (Ph.D.)--The University of Wisconsin - Madison, 2019.
This item must not be sold to any third party vendors.
A novel and facile sub-critical gas-assisted processing (SGAP) method for enhancing the dispersion of nanocomposites and blends during twin-screw extrusion (TSE) is introduced. Three nanocomposite systems were investigated: polypropylene (PP) with 0.5wt% graphene nanoparticles (GNPs), ethylene vinyl alcohol (EVOH) with 5wt% nanoclay (NC), and PP with 10wt% polycaprolactone (PCL) and 5wt% NC. The SGAP method injects sub-critical carbon dioxide (CO 2) or nitrogen (N2) into the melt during extrusion, which causes foaming. Bubble expansion during foaming introduces an equibiaxial elongational flow not otherwise generated in TSE, adding to the total stress the polymer matrix can exert to break up nanoparticle agglomerates and reduce the droplet size of secondary polymers in blends. In PP, samples processed with SGAP using CO2 were found to have a better dispersion of GNPs as evidenced by x-ray diffraction (XRD), scanning electron microscopy (SEM), rheology, Raman spectroscopy, and thermogravimetric analysis (TGA). In EVOH, nanoclay was shown to have increased dispersion with CO2 or N 2, as confirmed via XRD, SEM, rheology, TGA, and micro-computed tomography (μCT). An additional benefit of SGAP was a decrease in the amount of thermo-oxidative degradation in EVOH during processing. In PP, SGAP using N2 aided in reducing the droplet size of PCL and exfoliating the NC as measured with SEM and XRD. As a result, impact resistance was increased. SGAP has been shown to be effective in increasing the dispersion of 2D nanofillers and reducing the secondary phase size in polymer nanocomposites and blends.
ISBN: 9780438837959Subjects--Topical Terms:
526235
Nanotechnology.
Sub-Critical Gas-Assisted Processing of Polymer Nanocomposites and Blends.
LDR
:02688nmm a2200325 4500
001
2205817
005
20190828140001.5
008
201008s2019 ||||||||||||||||| ||eng d
020
$a
9780438837959
035
$a
(MiAaPQ)AAI13427816
035
$a
(MiAaPQ)wisc:16005
035
$a
AAI13427816
040
$a
MiAaPQ
$c
MiAaPQ
100
1
$a
Ellingham, Thomas K., Jr.
$3
3432692
245
1 0
$a
Sub-Critical Gas-Assisted Processing of Polymer Nanocomposites and Blends.
260
1
$a
Ann Arbor :
$b
ProQuest Dissertations & Theses,
$c
2019
300
$a
117 p.
500
$a
Source: Dissertations Abstracts International, Volume: 80-08, Section: B.
500
$a
Publisher info.: Dissertation/Thesis.
500
$a
Turng, Lih-Sheng.
502
$a
Thesis (Ph.D.)--The University of Wisconsin - Madison, 2019.
506
$a
This item must not be sold to any third party vendors.
520
$a
A novel and facile sub-critical gas-assisted processing (SGAP) method for enhancing the dispersion of nanocomposites and blends during twin-screw extrusion (TSE) is introduced. Three nanocomposite systems were investigated: polypropylene (PP) with 0.5wt% graphene nanoparticles (GNPs), ethylene vinyl alcohol (EVOH) with 5wt% nanoclay (NC), and PP with 10wt% polycaprolactone (PCL) and 5wt% NC. The SGAP method injects sub-critical carbon dioxide (CO 2) or nitrogen (N2) into the melt during extrusion, which causes foaming. Bubble expansion during foaming introduces an equibiaxial elongational flow not otherwise generated in TSE, adding to the total stress the polymer matrix can exert to break up nanoparticle agglomerates and reduce the droplet size of secondary polymers in blends. In PP, samples processed with SGAP using CO2 were found to have a better dispersion of GNPs as evidenced by x-ray diffraction (XRD), scanning electron microscopy (SEM), rheology, Raman spectroscopy, and thermogravimetric analysis (TGA). In EVOH, nanoclay was shown to have increased dispersion with CO2 or N 2, as confirmed via XRD, SEM, rheology, TGA, and micro-computed tomography (μCT). An additional benefit of SGAP was a decrease in the amount of thermo-oxidative degradation in EVOH during processing. In PP, SGAP using N2 aided in reducing the droplet size of PCL and exfoliating the NC as measured with SEM and XRD. As a result, impact resistance was increased. SGAP has been shown to be effective in increasing the dispersion of 2D nanofillers and reducing the secondary phase size in polymer nanocomposites and blends.
590
$a
School code: 0262.
650
4
$a
Nanotechnology.
$3
526235
650
4
$a
Plastics.
$3
649803
690
$a
0652
690
$a
0795
710
2
$a
The University of Wisconsin - Madison.
$b
Mechanical Engineering.
$3
2094221
773
0
$t
Dissertations Abstracts International
$g
80-08B.
790
$a
0262
791
$a
Ph.D.
792
$a
2019
793
$a
English
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13427816
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9382366
電子資源
11.線上閱覽_V
電子書
EB
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入