東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ subject:"Geological engineering." ]

切換: 標籤 | MARC模式 | ISBD

Detection and Elimination of Rock Fa...

Boyko, Kenneth John.

FindBook

Google Book

Amazon

博客來

Detection and Elimination of Rock Face Vegetation from Terrestrial Lidar Data Using the Virtual Articulating Conical Probe Algorithm.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Detection and Elimination of Rock Face Vegetation from Terrestrial Lidar Data Using the Virtual Articulating Conical Probe Algorithm./
作者:	Boyko, Kenneth John.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
面頁冊數:	277 p.
附註:	Source: Dissertations Abstracts International, Volume: 81-02, Section: B.
Contained By:	Dissertations Abstracts International81-02B.
標題:	Geological engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13813235
ISBN:	9781085569736

Detection and Elimination of Rock Face Vegetation from Terrestrial Lidar Data Using the Virtual Articulating Conical Probe Algorithm.
Boyko, Kenneth John.

Detection and Elimination of Rock Face Vegetation from Terrestrial Lidar Data Using the Virtual Articulating Conical Probe Algorithm. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 277 p.

Source: Dissertations Abstracts International, Volume: 81-02, Section: B.

Thesis (Ph.D.)--Missouri University of Science and Technology, 2019.

This item must not be sold to any third party vendors.

A common use of terrestrial lidar is to conduct studies involving change detection of natural or engineered surfaces. Change detection involves many technical steps beyond the initial data acquisition: data structuring, registration, and elimination of data artifacts such as parallax errors, near-field obstructions, and vegetation. Of these, vegetation detection and elimination with terrestrial lidar scanning (TLS) presents a completely different set of issues when compared to vegetation elimination from aerial lidar scanning (ALS). With ALS, the ground footprint of the lidar laser beam is very large, and the data acquisition hardware supports multi-return waveforms. Also, the underlying surface topography is relatively smooth compared to the overlying vegetation which has a high spatial frequency. On the other hand, with most TLS systems, the width of the lidar laser beam is very small, and the data acquisition hardware supports only first-return signals. For the case where vegetation is covering a rock face, the underlying rock surface is not smooth because rock joints and sharp block edges have a high spatial frequency very similar to the overlying vegetation. Traditional ALS approaches to eliminate vegetation take advantage of the contrast in spatial frequency between the underlying ground surface and the overlying vegetation. When the ALS approach is used on vegetated rock faces, the algorithm, as expected, eliminates the vegetation, but also digitally erodes the sharp corners of the underlying rock. A new method that analyzes the slope of a surface along with relative depth and contiguity information is proposed as away of differentiating high spatial frequency vegetative cover from similar high spatial frequency rock surfaces. This method, named the Virtual Articulating Conical Probe (VACP) algorithm, offers a solution for detection and elimination of rock face vegetation from TLS point cloud data while not affecting the geometry of the underlying rock surface. Such a tool could prove invaluable to the geotechnical engineer for quantifying rates of vertical-face rock loss that impact civil infrastructure safety.

ISBN: 9781085569736Subjects--Topical Terms:

2122713
Geological engineering.

Detection and Elimination of Rock Face Vegetation from Terrestrial Lidar Data Using the Virtual Articulating Conical Probe Algorithm.
LDR:03212nmm a2200301 4500 001 2263394
005 20200316072001.5
008 220629s2019 ||||||||||||||||| ||eng d
020 $a 9781085569736
035 $a (MiAaPQ)AAI13813235
035 $a AAI13813235
040 $a MiAaPQ $c MiAaPQ
100 1 $a Boyko, Kenneth John. $3 3540486
245 1 0 $a Detection and Elimination of Rock Face Vegetation from Terrestrial Lidar Data Using the Virtual Articulating Conical Probe Algorithm.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 277 p.
500 $a Source: Dissertations Abstracts International, Volume: 81-02, Section: B.
500 $a Advisor: Maerz, Norbert.
502 $a Thesis (Ph.D.)--Missouri University of Science and Technology, 2019.
506 $a This item must not be sold to any third party vendors.
520 $a A common use of terrestrial lidar is to conduct studies involving change detection of natural or engineered surfaces. Change detection involves many technical steps beyond the initial data acquisition: data structuring, registration, and elimination of data artifacts such as parallax errors, near-field obstructions, and vegetation. Of these, vegetation detection and elimination with terrestrial lidar scanning (TLS) presents a completely different set of issues when compared to vegetation elimination from aerial lidar scanning (ALS). With ALS, the ground footprint of the lidar laser beam is very large, and the data acquisition hardware supports multi-return waveforms. Also, the underlying surface topography is relatively smooth compared to the overlying vegetation which has a high spatial frequency. On the other hand, with most TLS systems, the width of the lidar laser beam is very small, and the data acquisition hardware supports only first-return signals. For the case where vegetation is covering a rock face, the underlying rock surface is not smooth because rock joints and sharp block edges have a high spatial frequency very similar to the overlying vegetation. Traditional ALS approaches to eliminate vegetation take advantage of the contrast in spatial frequency between the underlying ground surface and the overlying vegetation. When the ALS approach is used on vegetated rock faces, the algorithm, as expected, eliminates the vegetation, but also digitally erodes the sharp corners of the underlying rock. A new method that analyzes the slope of a surface along with relative depth and contiguity information is proposed as away of differentiating high spatial frequency vegetative cover from similar high spatial frequency rock surfaces. This method, named the Virtual Articulating Conical Probe (VACP) algorithm, offers a solution for detection and elimination of rock face vegetation from TLS point cloud data while not affecting the geometry of the underlying rock surface. Such a tool could prove invaluable to the geotechnical engineer for quantifying rates of vertical-face rock loss that impact civil infrastructure safety.
590 $a School code: 0587.
650 4 $a Geological engineering. $3 2122713
650 4 $a Civil engineering. $3 860360
690 $a 0466
690 $a 0543
710 2 $a Missouri University of Science and Technology. $b Geological Engineering. $3 3183948
773 0 $t Dissertations Abstracts International $g 81-02B.
790 $a 0587
791 $a Ph.D.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13813235