東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ subject:"Engineering, Packaging." ]

切換: 標籤 | MARC模式 | ISBD

Characterization and reliability ana...

Silva, Peterson S.

FindBook

Google Book

Amazon

博客來

Characterization and reliability analysis of wire bonds inside a package subjected to cyclic loading.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Characterization and reliability analysis of wire bonds inside a package subjected to cyclic loading./
作者:	Silva, Peterson S.
面頁冊數:	94 p.
附註:	Source: Masters Abstracts International, Volume: 44-05, page: 2437.
Contained By:	Masters Abstracts International44-05.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1433637
ISBN:	9780542602474

Characterization and reliability analysis of wire bonds inside a package subjected to cyclic loading.
Silva, Peterson S.

Characterization and reliability analysis of wire bonds inside a package subjected to cyclic loading. - 94 p.

Source: Masters Abstracts International, Volume: 44-05, page: 2437.

Thesis (M.S.)--Tufts University, 2006.

This study predicts analytically and determines experimentally the mechanical effects on the wire bonds caused by the ultrasonic welding process performed to hermetically seal the lid to the LDMOS housing base. The first task was to perform a finite element analysis and understand the response of the system under the conditions set by the experimental apparatus. The natural frequencies of the model containing a quarter-LDMOS housing base with one die and one wire were determined under a modal analysis. Stresses and displacements at both wire bond locations were analyzed, plotted and compared to the ultimate yield stress of gold material. The finite element results demonstrated that an equivalent cyclic load applied to the lip of the LCP wall can cause failure on the wire bonds due to high stresses at some of the resonant frequencies of the system. It was also shown that the resonant frequencies associated with the motion of the wire caused the highest stresses on the wire bonds. Finally, the experimental work agreed with the theoretical prediction. Both visual inspection and the bond pull test performed after exposure of the wires to ultrasonic welding showed a considerable number of wires that broke off or yielded low bond strength results at the same predicted locations. Such observations resulted in concluding that wires can be damaged by the ultrasonic welding process and recommendations were generated for future research.

ISBN: 9780542602474Subjects--Topical Terms:

783786
Engineering, Mechanical.

Characterization and reliability analysis of wire bonds inside a package subjected to cyclic loading.
LDR:02323nmm 2200277 4500 001 1830787
005 20070427114542.5
008 130610s2006 eng d
020 $a 9780542602474
035 $a (UnM)AAI1433637
035 $a AAI1433637
040 $a UnM $c UnM
100 1 $a Silva, Peterson S. $3 1919607
245 1 0 $a Characterization and reliability analysis of wire bonds inside a package subjected to cyclic loading.
300 $a 94 p.
500 $a Source: Masters Abstracts International, Volume: 44-05, page: 2437.
500 $a Adviser: Anil Saigal.
502 $a Thesis (M.S.)--Tufts University, 2006.
520 $a This study predicts analytically and determines experimentally the mechanical effects on the wire bonds caused by the ultrasonic welding process performed to hermetically seal the lid to the LDMOS housing base. The first task was to perform a finite element analysis and understand the response of the system under the conditions set by the experimental apparatus. The natural frequencies of the model containing a quarter-LDMOS housing base with one die and one wire were determined under a modal analysis. Stresses and displacements at both wire bond locations were analyzed, plotted and compared to the ultimate yield stress of gold material. The finite element results demonstrated that an equivalent cyclic load applied to the lip of the LCP wall can cause failure on the wire bonds due to high stresses at some of the resonant frequencies of the system. It was also shown that the resonant frequencies associated with the motion of the wire caused the highest stresses on the wire bonds. Finally, the experimental work agreed with the theoretical prediction. Both visual inspection and the bond pull test performed after exposure of the wires to ultrasonic welding showed a considerable number of wires that broke off or yielded low bond strength results at the same predicted locations. Such observations resulted in concluding that wires can be damaged by the ultrasonic welding process and recommendations were generated for future research.
590 $a School code: 0234.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Engineering, Packaging. $3 1025152
690 $a 0548
690 $a 0549
710 2 0 $a Tufts University. $3 1017847
773 0 $t Masters Abstracts International $g 44-05.
790 1 0 $a Saigal, Anil, $e advisor
790 $a 0234
791 $a M.S.
792 $a 2006
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1433637