語系:
繁體中文
English
說明(常見問題)
回圖書館首頁
手機版館藏查詢
登入
回首頁
到查詢結果
[ subject:"Engineering, Materials Science." ]
切換:
標籤
|
MARC模式
|
ISBD
Nanomorphology control and novel mat...
~
Yao, Yan.
FindBook
Google Book
Amazon
博客來
Nanomorphology control and novel materials studies in polymer/fullerene bulk heterojunction solar cells.
紀錄類型:
書目-語言資料,印刷品 : Monograph/item
正題名/作者:
Nanomorphology control and novel materials studies in polymer/fullerene bulk heterojunction solar cells./
作者:
Yao, Yan.
面頁冊數:
151 p.
附註:
Adviser: Yang Yang.
Contained By:
Dissertation Abstracts International69-07B.
標題:
Energy. -
電子資源:
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3317031
ISBN:
9780549711810
Nanomorphology control and novel materials studies in polymer/fullerene bulk heterojunction solar cells.
Yao, Yan.
Nanomorphology control and novel materials studies in polymer/fullerene bulk heterojunction solar cells.
- 151 p.
Adviser: Yang Yang.
Thesis (Ph.D.)--University of California, Los Angeles, 2008.
This dissertation focuses on improving the efficiency of polymer/fullerene bulk heterojunction solar cells from two directions: (i) understanding the nanomorphology-efficiency relationship and controlling the active layer morphology during its formation; (ii) developing new materials for both electron donors and electron acceptors in the polymer solar cells.
ISBN: 9780549711810Subjects--Topical Terms:
876794
Energy.
Nanomorphology control and novel materials studies in polymer/fullerene bulk heterojunction solar cells.
LDR
:03380nam 2200301 a 45
001
856774
005
20100709
008
100709s2008 ||||||||||||||||| ||eng d
020
$a
9780549711810
035
$a
(UMI)AAI3317031
035
$a
AAI3317031
040
$a
UMI
$c
UMI
100
1
$a
Yao, Yan.
$3
1023639
245
1 0
$a
Nanomorphology control and novel materials studies in polymer/fullerene bulk heterojunction solar cells.
300
$a
151 p.
500
$a
Adviser: Yang Yang.
500
$a
Source: Dissertation Abstracts International, Volume: 69-07, Section: B, page: 4372.
502
$a
Thesis (Ph.D.)--University of California, Los Angeles, 2008.
520
$a
This dissertation focuses on improving the efficiency of polymer/fullerene bulk heterojunction solar cells from two directions: (i) understanding the nanomorphology-efficiency relationship and controlling the active layer morphology during its formation; (ii) developing new materials for both electron donors and electron acceptors in the polymer solar cells.
520
$a
A solvent annealing approach is successfully demonstrated to control the morphology and increase device efficiency in poly(3-hexylthiophene):fullerene solar cells. A detailed evolution study on this approach using absorption, photoluminescence, external quantum efficiency, atomic force microscopy, and grazing incidence X-ray diffraction techniques leads to following understanding: the optimum nanomorphology must be a balance between large interfacial area for exciton dissociation and continuous pathways for carrier transportation. 4.4% efficiency is demonstrated in this system. Effects of solvent mixture on the nanoscale phase separation are studied further. The donor/acceptor components in the active layer can "intelligently" phase separate into an optimum morphology during the spin-coating process and no further treatment is necessary. Devices with the solvent mixture show about 10 times higher efficiency compared to those devices fabricated without the additive solvent fabricated under the same condition. A model and additive solvent selection rule are proposed to explain the phenomenon.
520
$a
To address the absorption mismatch with solar spectrum, two novel low band gap copolymers containing 3-alkoxythiophene have been synthesized with the band gap of 1.64 and 1.77 eV, respectively. In addition, novel electron acceptors also hold great promise. A 50% increase in short-circuit current is demonstrated by using (6,6)-phenyl-C71-butyric acid methyl ester (C70-PCBM) to replace (6,6)-phenyl-C61-butyric acid methyl ester (PCBM). As the result, 2.4% power conversion efficiency is achieved for low band gap polymer based solar cells. Another low band gap polymer, an ester group modified polythieno[3,4-b]thiophene, is utilized to fabricate near-infrared photodetector with external quantum efficiency exceeding 38%, response bandwidth of 4 MHz, and the noise equivalent power of 3.85 x 10-12 W/Hz1/2 at 850 nm. An all-polymer based optocoupler with high current-density-transfer-ratio (1.5%) and fast response time (500 kHz) is also demonstrated in this work.
590
$a
School code: 0031.
650
4
$a
Energy.
$3
876794
650
4
$a
Engineering, Materials Science.
$3
1017759
690
$a
0791
690
$a
0794
710
2
$a
University of California, Los Angeles.
$3
626622
773
0
$t
Dissertation Abstracts International
$g
69-07B.
790
$a
0031
790
1 0
$a
Yang, Yang,
$e
advisor
791
$a
Ph.D.
792
$a
2008
856
4 0
$u
http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3317031
筆 0 讀者評論
館藏地:
全部
電子資源
出版年:
卷號:
館藏
1 筆 • 頁數 1 •
1
條碼號
典藏地名稱
館藏流通類別
資料類型
索書號
使用類型
借閱狀態
預約狀態
備註欄
附件
W9071982
電子資源
11.線上閱覽_V
電子書
EB W9071982
一般使用(Normal)
在架
0
1 筆 • 頁數 1 •
1
多媒體
評論
新增評論
分享你的心得
Export
取書館
處理中
...
變更密碼
登入