東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ subject:"Electric motors, Synchronous." ]

切換: 標籤 | MARC模式 | ISBD

Third harmonic utilization in perman...

Wang, Kai.

FindBook

Google Book

Amazon

博客來

Third harmonic utilization in permanent magnet machines

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Third harmonic utilization in permanent magnet machines/ by Kai Wang, Zi-Qiang Zhu.
作者:	Wang, Kai.
其他作者:	Zhu, Zi-Qiang.
出版者:	Singapore :Springer Singapore : : 2019.,
面頁冊數:	xi, 211 p. :ill. (some col.), digital ;24 cm.
內容註:	General Introduction -- Torque Enhancement of Three Phase Surface-Mounted Permanent Magnet Machine Using 3rd Order Harmonic -- Average Torque Improvement of Three Phase Interior Permanent-Magnet Machine Using 3rd Harmonic in Rotor Shape -- Third Order Harmonic Utilization in In-Wheel Machines to Improve Output Torque -- Influence of Airgap Flux Density Waveform on Optimal Split Ratio and Torque Density of SPM Machines -- Investigation of Stator Flux Density and Iron Loss in 3rd Order Harmonic Shaped Surface-Mounted Permanent Magnet Machines -- Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Shaped Magnets -- Influence of Harmonics on Radial Force and Vibration of Surface-Mounted Permanent Magnet Machines -- Multi-Objective Optimization of Surface-Mounted Permanent Magnet Machine with Third Harmonic Shaped Rotor -- Using Third Harmonic for Shape Optimization of Flux Density Distribution in Slotless Linear Permanent-Magnet Machine -- Design and Analysis of Permanent Magnet Linear Synchronous Machine with Third Harmonic Shaping Mover.
Contained By:	Springer eBooks
標題:	Permanent magnet motors. -
電子資源:	https://doi.org/10.1007/978-981-13-0629-7
ISBN:	9789811306297

Third harmonic utilization in permanent magnet machines
Wang, Kai.

Third harmonic utilization in permanent magnet machines[electronic resource] /by Kai Wang, Zi-Qiang Zhu. - Singapore :Springer Singapore :2019. - xi, 211 p. :ill. (some col.), digital ;24 cm.

General Introduction -- Torque Enhancement of Three Phase Surface-Mounted Permanent Magnet Machine Using 3rd Order Harmonic -- Average Torque Improvement of Three Phase Interior Permanent-Magnet Machine Using 3rd Harmonic in Rotor Shape -- Third Order Harmonic Utilization in In-Wheel Machines to Improve Output Torque -- Influence of Airgap Flux Density Waveform on Optimal Split Ratio and Torque Density of SPM Machines -- Investigation of Stator Flux Density and Iron Loss in 3rd Order Harmonic Shaped Surface-Mounted Permanent Magnet Machines -- Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Shaped Magnets -- Influence of Harmonics on Radial Force and Vibration of Surface-Mounted Permanent Magnet Machines -- Multi-Objective Optimization of Surface-Mounted Permanent Magnet Machine with Third Harmonic Shaped Rotor -- Using Third Harmonic for Shape Optimization of Flux Density Distribution in Slotless Linear Permanent-Magnet Machine -- Design and Analysis of Permanent Magnet Linear Synchronous Machine with Third Harmonic Shaping Mover.

This book investigates the utilization of harmonics in the permanent magnet (PM) or rotor shape to improve the torque density of PM brushless AC machines including three-phase inner rotor and outer rotor machines, five-phase machines, dual three-phase machines, linear machines, by means of analytical, finite element analyses, and as well as experimental validation. The torque density can be improved while the torque ripple remains low in PM shaping utilizing the 3rd harmonic. In this book, the analytical expression of output torque is derived for PM machines with rotor shape using the 3rd harmonic, and then the optimal 3rd harmonic for maximizing torque is analytically obtained. The book compares the PM shape in surface-mounted PM (SPM) machines and the rotor lamination shape in interior PM (IPM) machines utilizing the 3rd harmonic, and it becomes clear that their shaping methods and amount of torque improvement are different. In a five-phase PM machine, the 3rd harmonic can be utilized in both the current waveform and PM shapes to further improve the output torque. For the dual three-phase SPM machines without deteriorating the torque more than 30% when the optimal 3rd harmonic into both the current and PM shape are injected. The harmonics in airgap flux density have significant influence on the cogging torque, stator iron flux distribution, and radial force between the rotor and stator. These effects has been investigated as well in this book.

ISBN: 9789811306297

Standard No.: 10.1007/978-981-13-0629-7doiSubjects--Topical Terms:

731800
Permanent magnet motors.

LC Class. No.: TK2537

Dewey Class. No.: 621.4

Third harmonic utilization in permanent magnet machines
LDR:03513nmm a2200325 a 4500 001 2176933
003 DE-He213
005 20180831021217.0
006 m d
007 cr nn 008maaau
008 191122s2019 si s 0 eng d
020 $a 9789811306297 $q (electronic bk.)
020 $a 9789811306280 $q (paper)
024 7 $a 10.1007/978-981-13-0629-7 $2 doi
035 $a 978-981-13-0629-7
040 $a GP $c GP
041 0 $a eng
050 4 $a TK2537
072 7 $a THRD $2 bicssc
072 7 $a TEC046000 $2 bisacsh
072 7 $a THR $2 thema
082 0 4 $a 621.4 $2 23
090 $a TK2537 $b .W246 2019
100 1 $a Wang, Kai. $3 1022259
245 1 0 $a Third harmonic utilization in permanent magnet machines $h [electronic resource] / $c by Kai Wang, Zi-Qiang Zhu.
260 $a Singapore : $b Springer Singapore : $b Imprint: Springer, $c 2019.
300 $a xi, 211 p. : $b ill. (some col.), digital ; $c 24 cm.
505 0 $a General Introduction -- Torque Enhancement of Three Phase Surface-Mounted Permanent Magnet Machine Using 3rd Order Harmonic -- Average Torque Improvement of Three Phase Interior Permanent-Magnet Machine Using 3rd Harmonic in Rotor Shape -- Third Order Harmonic Utilization in In-Wheel Machines to Improve Output Torque -- Influence of Airgap Flux Density Waveform on Optimal Split Ratio and Torque Density of SPM Machines -- Investigation of Stator Flux Density and Iron Loss in 3rd Order Harmonic Shaped Surface-Mounted Permanent Magnet Machines -- Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Shaped Magnets -- Influence of Harmonics on Radial Force and Vibration of Surface-Mounted Permanent Magnet Machines -- Multi-Objective Optimization of Surface-Mounted Permanent Magnet Machine with Third Harmonic Shaped Rotor -- Using Third Harmonic for Shape Optimization of Flux Density Distribution in Slotless Linear Permanent-Magnet Machine -- Design and Analysis of Permanent Magnet Linear Synchronous Machine with Third Harmonic Shaping Mover.
520 $a This book investigates the utilization of harmonics in the permanent magnet (PM) or rotor shape to improve the torque density of PM brushless AC machines including three-phase inner rotor and outer rotor machines, five-phase machines, dual three-phase machines, linear machines, by means of analytical, finite element analyses, and as well as experimental validation. The torque density can be improved while the torque ripple remains low in PM shaping utilizing the 3rd harmonic. In this book, the analytical expression of output torque is derived for PM machines with rotor shape using the 3rd harmonic, and then the optimal 3rd harmonic for maximizing torque is analytically obtained. The book compares the PM shape in surface-mounted PM (SPM) machines and the rotor lamination shape in interior PM (IPM) machines utilizing the 3rd harmonic, and it becomes clear that their shaping methods and amount of torque improvement are different. In a five-phase PM machine, the 3rd harmonic can be utilized in both the current waveform and PM shapes to further improve the output torque. For the dual three-phase SPM machines without deteriorating the torque more than 30% when the optimal 3rd harmonic into both the current and PM shape are injected. The harmonics in airgap flux density have significant influence on the cogging torque, stator iron flux distribution, and radial force between the rotor and stator. These effects has been investigated as well in this book.
650 0 $a Permanent magnet motors. $3 731800
650 0 $a Electric motors, Synchronous. $3 731798
650 1 4 $a Power Electronics, Electrical Machines and Networks. $3 1001796
650 2 4 $a Machinery and Machine Elements. $3 893855
650 2 4 $a Manufacturing, Machines, Tools. $3 891025
700 1 $a Zhu, Zi-Qiang. $3 3379498
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
856 4 0 $u https://doi.org/10.1007/978-981-13-0629-7
950 $a Engineering (Springer-11647)