東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ subject:"Agriculture, Wood Technology." ]

切換: 標籤 | MARC模式 | ISBD

Structure-based, two-dimensional ani...

Gu, Hongmei.

FindBook

Google Book

Amazon

博客來

Structure-based, two-dimensional anisotropic, transient heat conduction model for wood.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Structure-based, two-dimensional anisotropic, transient heat conduction model for wood./
作者:	Gu, Hongmei.
面頁冊數:	214 p.
附註:	Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2464.
Contained By:	Dissertation Abstracts International64-06B.
標題:	Agriculture, Wood Technology. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3095202
ISBN:	0496428284

Structure-based, two-dimensional anisotropic, transient heat conduction model for wood.
Gu, Hongmei.

Structure-based, two-dimensional anisotropic, transient heat conduction model for wood. - 214 p.

Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2464.

Thesis (Ph.D.)--Virginia Polytechnic Institute and State University, 2001.

The importance of precise values for the parameters used in heat and mass transfer models has been demonstrated by many research studies. Thermal conductivity values used in previous models are usually empirical and fluctuate. Theoretical analysis and estimations of wood thermal conductivities in the radial and tangential directions were conducted with the geometric models built up from the macro- and micro-structure observations. Theoretically, thermal conductivity in the radial direction is about 1.5 to 2.5 times of the tangential direction for softwood species with moisture content (MC) below Fiber Saturation Point (FSP). When MC is over the FSP, tangential radial thermal conductivity both increase dramatically and are linear function of MC. The two thermal conductivity values are close with a ratio of near one estimated by the model for MC above the FPS. In hardwood species, radial thermal conductivity estimated by the model is 1.5 times of the tangential thermal conductivity. Validation tests for model estimations of thermal conductivities in the radial and tangential directions for three wood species showed the reliability of the geometric models developed in this project. Correlations between the wood thermal conductivity and structure parameters, such as latewood percentage and cell wall percentage, were examined. Linear relationships for the thermal conductivity and average temperature in wood were established in both radial and tangential directions of three wood species.

ISBN: 0496428284Subjects--Topical Terms:

1031154
Agriculture, Wood Technology.

Structure-based, two-dimensional anisotropic, transient heat conduction model for wood.
LDR:03621nmm 2200289 4500 001 1845589
005 20051101072034.5
008 130614s2001 eng d
020 $a 0496428284
035 $a (UnM)AAI3095202
035 $a AAI3095202
040 $a UnM $c UnM
100 1 $a Gu, Hongmei. $3 1933744
245 1 0 $a Structure-based, two-dimensional anisotropic, transient heat conduction model for wood.
300 $a 214 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-06, Section: B, page: 2464.
500 $a Chair: Audrey Zink-Sharp.
502 $a Thesis (Ph.D.)--Virginia Polytechnic Institute and State University, 2001.
520 $a The importance of precise values for the parameters used in heat and mass transfer models has been demonstrated by many research studies. Thermal conductivity values used in previous models are usually empirical and fluctuate. Theoretical analysis and estimations of wood thermal conductivities in the radial and tangential directions were conducted with the geometric models built up from the macro- and micro-structure observations. Theoretically, thermal conductivity in the radial direction is about 1.5 to 2.5 times of the tangential direction for softwood species with moisture content (MC) below Fiber Saturation Point (FSP). When MC is over the FSP, tangential radial thermal conductivity both increase dramatically and are linear function of MC. The two thermal conductivity values are close with a ratio of near one estimated by the model for MC above the FPS. In hardwood species, radial thermal conductivity estimated by the model is 1.5 times of the tangential thermal conductivity. Validation tests for model estimations of thermal conductivities in the radial and tangential directions for three wood species showed the reliability of the geometric models developed in this project. Correlations between the wood thermal conductivity and structure parameters, such as latewood percentage and cell wall percentage, were examined. Linear relationships for the thermal conductivity and average temperature in wood were established in both radial and tangential directions of three wood species.
520 $a A two-dimensional transient heat conduction model was developed utilizing thermal conductivity values derived from geometric models. The anisotropic material property affect on heat transport in radial and tangential directions was discussed using an assumed situation. The simulation run showed slightly faster heat flow in the radial direction than in the tangential direction due to higher thermal conductivity in the radial direction. Validation tests on practical wood blocks showed the 2D model with the use of theoretical thermal conductivity values can predict good temperature distribution in wood during the heating process. However, in the practical wood samples with curved rings on the cross section, no significant difference was found in the two transverse directions.
520 $a Mathematica software was introduced in this study for the intense and complicated math calculations and model programming. Mathematica was found to be a powerful technique for solving sophisticated math problems. It had abundant and flexible plotting options for providing optimized presentations for the results. These advantages make Mathematica popular for engineering modeling research.
590 $a School code: 0247.
650 4 $a Agriculture, Wood Technology. $3 1031154
690 $a 0746
710 2 0 $a Virginia Polytechnic Institute and State University. $3 1017496
773 0 $t Dissertation Abstracts International $g 64-06B.
790 1 0 $a Zink-Sharp, Audrey, $e advisor
790 $a 0247
791 $a Ph.D.
792 $a 2001
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3095202