東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ author_sort:"antoun, bonnie." ]

切換: 標籤 | MARC模式 | ISBD

Challenges in mechanics of time depe...

SEM Conference & Exposition on Experimental and Applied Mechanics ((2016 :)

FindBook

Google Book

Amazon

博客來

Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Challenges in mechanics of time dependent materials./ edited by Bonnie Antoun ... [et al.].
其他題名:	proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /
其他作者:	Antoun, Bonnie.
團體作者:	SEM Conference & Exposition on Experimental and Applied Mechanics
出版者:	Cham :Springer International Publishing : : 2017.,
面頁冊數:	viii, 217 p. :ill., digital ;24 cm.
內容註:	1 Cracking and Durability of Composites in a Marine Environment -- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617 -- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS -- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers -- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology -- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique -- 7 Bio-based Composites as Thermorheologically Complex Materials -- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder -- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test -- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation -- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX -- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments -- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces -- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites -- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane -- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material -- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method -- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel -- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests -- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds -- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material -- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor -- 23 Back Stress in Modeling the Response of PEEK and PC -- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers -- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin -- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests -- 27 Characterization of Fiber Composites at Lower Strain Rates.
Contained By:	Springer eBooks
標題:	Mechanics, Applied - Congresses. -
電子資源:	http://dx.doi.org/10.1007/978-3-319-41543-7
ISBN:	9783319415437

Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2
Challenges in mechanics of time dependent materials.proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /Volume 2[electronic resource] :edited by Bonnie Antoun ... [et al.]. - Cham :Springer International Publishing :2017. - viii, 217 p. :ill., digital ;24 cm. - Conference proceedings of the society for experimental mechanics series,2191-5644. - Conference proceedings of the society for experimental mechanics series..

1 Cracking and Durability of Composites in a Marine Environment -- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617 -- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS -- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers -- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology -- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique -- 7 Bio-based Composites as Thermorheologically Complex Materials -- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder -- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test -- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation -- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX -- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments -- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces -- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites -- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane -- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material -- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method -- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel -- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests -- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds -- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material -- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor -- 23 Back Stress in Modeling the Response of PEEK and PC -- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers -- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin -- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests -- 27 Characterization of Fiber Composites at Lower Strain Rates.

Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Extreme Environments & Environmental Effects Structure-Function of Performance of PE Effects of Inhomogeneities & Interfaces Characterization Across Scales Mechanics of Energy & Energetic Materials Metallic Materials Viscoelasticity & Viscoplasticity.

ISBN: 9783319415437

Standard No.: 10.1007/978-3-319-41543-7doiSubjects--Topical Terms:

818218
Mechanics, Applied
--Congresses.

LC Class. No.: TA401.3

Dewey Class. No.: 620.11

Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2
LDR:04199nmm a2200337 a 4500 001 2087806
003 DE-He213
005 20160920122946.0
006 m d
007 cr nn 008maaau
008 171013s2017 gw s 0 eng d
020 $a 9783319415437 $q (electronic bk.)
020 $a 9783319415420 $q (paper)
024 7 $a 10.1007/978-3-319-41543-7 $2 doi
035 $a 978-3-319-41543-7
040 $a GP $c GP
041 0 $a eng
050 4 $a TA401.3
072 7 $a TG $2 bicssc
072 7 $a TEC009070 $2 bisacsh
072 7 $a TEC021000 $2 bisacsh
082 0 4 $a 620.11 $2 23
090 $a TA401.3 $b .S471 2016
111 2 $a SEM Conference & Exposition on Experimental and Applied Mechanics $d (2016 : $c Orlando, Florida) $3 3216997
245 1 0 $a Challenges in mechanics of time dependent materials. $n Volume 2 $h [electronic resource] : $b proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics / $c edited by Bonnie Antoun ... [et al.].
260 $a Cham : $b Springer International Publishing : $b Imprint: Springer, $c 2017.
300 $a viii, 217 p. : $b ill., digital ; $c 24 cm.
490 1 $a Conference proceedings of the society for experimental mechanics series, $x 2191-5644
505 0 $a 1 Cracking and Durability of Composites in a Marine Environment -- 2 Analyses of Nanoscale to Microscale Strength and Crack-tip Stresses Using Nanomechanical Raman Spectroscopy in In 617 -- 3 High Creep Resistance of Titanium Aluminides Sintered by SPS -- 4 An Investigation of the Temperature and Strain-Rate Effects on Strain-to-Failure of UHMWPE Fibers -- 5 Keynote Life Prediction of CFRP Laminates based on Accelerated Testing Methodology -- 6 Rate Dependent Interfacial Properties Using the JKR Experimental Technique -- 7 Bio-based Composites as Thermorheologically Complex Materials -- 8 Viscoelastic Properties of Longitudinal Waves in a Hollow Cylinder -- 9 Evaluation of Viscoelastic Characteristics Under High Strain Rate by Impact Test -- 10 Phase Changes in Embedded HMX in Response to Periodic Mechanical Excitation -- 11 Effect of Crystal Density on Dynamic Deformation Behavior of PBX -- 12 Strain Rate Dependent Failure of Interfaces Examined via Nanoimpact Experiments -- 13 A Theory of Coupled Anisothermal Chemomechanical Degradation for Finitely-deforming Composite Materials with Eshelbian Interactive Forces -- 14 Effect Of Temperature And Moisture on the Mechanical Properties of Fiber Reinforced Nylon 6 Composites -- 15 Using Hydrostatic Pressure to Maximize Frequency Dependent Damping Properties of Thermoplastic Polyurethane -- 16 Impact Of Hydro-Mechanical Loadings On Rupture Process In Wood Material -- 17 2D Transient Viscoplastic Model for Dislocation Generation of SiC by PVT Method -- 18 Temperature-Dependent Small Strain Plasticity Behavior of 304L Stainless Steel -- 19 Time and Temperature Creep Behaviour Measurement of Al and Al-Mg Alloy Thin Films Using Pressure Bulge Tests -- 20 Multifunctional Wings with Flexible Batteries and Solar Cells for Robotic Birds -- 21 Rate-Dependent Constitutive Model Development of PC/ABS Material -- 22 Comprehensive Viscoelastic Properties Characterization of EMC Using FBG Sensor -- 23 Back Stress in Modeling the Response of PEEK and PC -- 24 Dynamic Testing and Constitutive Modelling of NBR Rubbers -- 25 A New Temperature-dependent Storage Modulus Model of Epoxy Resin -- 26 Identification of Plastic Behaviour of Sheet Metals in High Strain Rate Tests -- 27 Characterization of Fiber Composites at Lower Strain Rates.
520 $a Challenges in Mechanics of Time-Dependent Materials, Volume 2 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the second volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers in the following general technical research areas: Extreme Environments & Environmental Effects Structure-Function of Performance of PE Effects of Inhomogeneities & Interfaces Characterization Across Scales Mechanics of Energy & Energetic Materials Metallic Materials Viscoelasticity & Viscoplasticity.
650 0 $a Mechanics, Applied $v Congresses. $3 818218
650 0 $a Testing $v Congresses. $3 3216998
650 0 $a Materials $x Testing $x Congresses. $3 698225
650 1 4 $a Engineering. $3 586835
650 2 4 $a Continuum Mechanics and Mechanics of Materials. $3 890989
650 2 4 $a Building Materials. $3 894213
650 2 4 $a Characterization and Evaluation of Materials. $3 890988
650 2 4 $a Structural Materials. $3 898417
700 1 $a Antoun, Bonnie. $3 2054692
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer eBooks
830 0 $a Conference proceedings of the society for experimental mechanics series. $3 2054299
856 4 0 $u http://dx.doi.org/10.1007/978-3-319-41543-7
950 $a Engineering (Springer-11647)