東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Vehicle control utilizing an improve...

Koo, Shiang-Lung.

Linked to FindBook

Google Book

Amazon

博客來

Vehicle control utilizing an improved model of tire contact patch kinematics.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Vehicle control utilizing an improved model of tire contact patch kinematics./
Author:	Koo, Shiang-Lung.
Description:	167 p.
Notes:	Adviser: Masayoshi Tomizuka.
Contained By:	Dissertation Abstracts International69-03B.
Subject:	Engineering, Automotive. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3306198
ISBN:	9780549531210

Vehicle control utilizing an improved model of tire contact patch kinematics.
Koo, Shiang-Lung.

Vehicle control utilizing an improved model of tire contact patch kinematics. - 167 p.

Adviser: Masayoshi Tomizuka.

Thesis (Ph.D.)--University of California, Berkeley, 2007.

Vehicle dynamics depends heavily on the tire characteristics. Accordingly, a number of tire models were developed to capture the tire behaviors. Among them, the empirical tire models, generally obtained through lab tests, are commonly used in vehicle dynamics and control analyses. However, these models explain static tire behaviors and overlook the behaviors during transients. They often do not reflect the actual dynamic interactions between tire and vehicle under real operational environments, especially at low vehicle speeds. For example, such models do not predict the vehicle longitudinal overshoots and oscillations immediately after stopping a vehicle with hard braking.

ISBN: 9780549531210Subjects--Topical Terms:

1018477
Engineering, Automotive.

Vehicle control utilizing an improved model of tire contact patch kinematics.
LDR:03938nam 2200301 a 45 001 954699
005 20110622
008 110622s2007 ||||||||||||||||| ||eng d
020 $a 9780549531210
035 $a (UMI)AAI3306198
035 $a AAI3306198
040 $a UMI $c UMI
100 1 $a Koo, Shiang-Lung. $3 1278156
245 1 0 $a Vehicle control utilizing an improved model of tire contact patch kinematics.
300 $a 167 p.
500 $a Adviser: Masayoshi Tomizuka.
500 $a Source: Dissertation Abstracts International, Volume: 69-03, Section: B, page: 1908.
502 $a Thesis (Ph.D.)--University of California, Berkeley, 2007.
520 $a Vehicle dynamics depends heavily on the tire characteristics. Accordingly, a number of tire models were developed to capture the tire behaviors. Among them, the empirical tire models, generally obtained through lab tests, are commonly used in vehicle dynamics and control analyses. However, these models explain static tire behaviors and overlook the behaviors during transients. They often do not reflect the actual dynamic interactions between tire and vehicle under real operational environments, especially at low vehicle speeds. For example, such models do not predict the vehicle longitudinal overshoots and oscillations immediately after stopping a vehicle with hard braking.
520 $a This dissertation proposes a dynamic-deflection tire (DDT) model that not only specifies the known tire characteristics but also captures the dominant transient tire properties in longitudinal and lateral axes. This DDT model can be incorporated with the conventional vehicle models to accurately predict the resonant modes in the vehicle motions, steering lag behavior, and "tire mode switching" behavior. A snowblower has been tested as an example and the data verifies the predictions from the resulting vehicle lateral model. When this snowblower model is utilized in the simulations, the results indicate that the often-ignored tire characteristics can impact the steering control designs for vehicle lane-keeping maneuvers at low speeds. To show the importance of the transient tire dynamics to vehicle longitudinal control, the H-infinity control is employed to design controllers with and without the specific tire dynamics. When applying the two controllers to a passenger car, the experimental results demonstrate that the missing transient tire behavior is a key factor in designing vehicle longitudinal controllers for low-speed applications.
520 $a The transient tire behavior also influences passenger ride quality. Ride comfort at low vehicle speed is often overlooked but is important to vehicle control applications, e.g. the latest stop-and-go function in adaptive cruise control. Most control strategies that address passenger comfort simply utilize the bounds of jerk and acceleration of the vehicles. In general, they have several major limitations when applied to low-speed applications: (I) frequency-domain comfort requirements are not integrated and (II) the vehicle models are simplified too far to capture the tire and suspension dynamics that may impact comfort significantly at low speeds. With the aid of the improved vehicle longitudinal model, the impact of the vehicle resonant modes to ride comfort is investigated. A control scheme is developed to address the transient tire behaviors for ride quality under stop-and-go situations. This scheme is based on optimal control and it ensures smooth acceleration during vehicle maneuvers. A two-degree-of-freedom control strategy is used to approximate the optimal control law. Experimental results demonstrate the effectiveness of this control scheme.
590 $a School code: 0028.
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0540
690 $a 0548
710 2 $a University of California, Berkeley. $3 687832
773 0 $t Dissertation Abstracts International $g 69-03B.
790 $a 0028
790 1 0 $a Tomizuka, Masayoshi, $e advisor
791 $a Ph.D.
792 $a 2007
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3306198