東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Contributions a la caracterisation e...

Ecole Polytechnique, Montreal (Canada).

Linked to FindBook

Google Book

Amazon

博客來

Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres./
Author:	Boilard, Patrick.
Description:	312 p.
Notes:	Source: Dissertation Abstracts International, Volume: 70-03, Section: B, page: 1917.
Contained By:	Dissertation Abstracts International70-03B.
Subject:	Engineering, Materials Science. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=NR47716
ISBN:	9780494477168

Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres.
Boilard, Patrick.

Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres. - 312 p.

Source: Dissertation Abstracts International, Volume: 70-03, Section: B, page: 1917.

Thesis (Ph.D.)--Ecole Polytechnique, Montreal (Canada), 2009.

Even though powder metallurgy (P/M) is a near net shape process, a large number of parts still require one or more machining operations during the course of their elaboration and/or their finishing.

ISBN: 9780494477168Subjects--Topical Terms:

1017759
Engineering, Materials Science.

Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres.
LDR:05472nmm 2200325 a 45 001 890719
005 20101104
008 101104s2009 ||||||||||||||||| ||fre d
020 $a 9780494477168
035 $a (UMI)AAINR47716
035 $a AAINR47716
040 $a UMI $c UMI
100 1 $a Boilard, Patrick. $3 1064683
245 1 0 $a Contributions a la caracterisation et a l'amelioration de l'usinabilite de pieces d'acier elaborees par metallurgie des poudres.
300 $a 312 p.
500 $a Source: Dissertation Abstracts International, Volume: 70-03, Section: B, page: 1917.
502 $a Thesis (Ph.D.)--Ecole Polytechnique, Montreal (Canada), 2009.
520 $a Even though powder metallurgy (P/M) is a near net shape process, a large number of parts still require one or more machining operations during the course of their elaboration and/or their finishing.
520 $a The main objectives of the work presented in this thesis are centered on the elaboration of blends with enhanced machinability, as well as helping with the definition and in the characterization of the machinability of P/M parts. Enhancing machinability can be done in various ways, through the use of machinability additives and by decreasing the amount of porosity of the parts. These different ways of enhancing machinability have been investigated thoroughly, by systematically planning and preparing series of samples in order to obtain valid and repeatable results leading to meaningful conclusions relevant to the P/M domain.
520 $a Results obtained during the course of the work are divided into three main chapters: (1) the effect of machining parameters on machinability, (2) the effect of additives on machinability, and (3) the development and the characterization of high density parts obtained by liquid phase sintering.
520 $a Regarding the effect of machining parameters on machinability, studies were performed on parameters such as rotating speed, feed, tool position and diameter of the tool. Optimal cutting parameters are found for drilling operations performed on a standard FC-0208 blend, for different machinability criteria. Moreover, study of material removal rates shows the sensitivity of the machinability criteria for different machining parameters and indicates that thrust force is more regular than tool wear and slope of the drillability curve in the characterization of machinability.
520 $a The chapter discussing the effect of various additives on machinability reveals many interesting results. First, work carried out on MoS2 additions reveals the dissociation of this additive and the creation of metallic sulphides (namely CuxS sulphides) when copper is present. Results also show that it is possible to reduce the amount of MoS2 in the blend so as to lower the dimensional change and the cost (blend Mo8A), while enhancing machinability and keeping hardness values within the same range (70 HRB). Second, adding enstatite (MgO·SiO2) permits the observation of the mechanisms occurring with the use of this additive. It is found that the stability of enstatite limits the diffusion of graphite during sintering, leading to the presence of free graphite in the pores, thus enhancing machinability. Furthermore, a lower amount of graphite in the matrix leads to a lower hardness, which is also beneficial to machinability. It is also found that the presence of copper enhances the diffusion of graphite, through the formation of a liquid phase during sintering.
520 $a With the objective of improving machinability by reaching higher densities, blends were developed for densification through liquid phase sintering. High density samples are obtained (>7.5 g/cm3) for blends prepared with Fe-C-P constituents, namely with 0.5%P and 2.4%C. By systematically studying the effect of different parameters, the importance of the chemical composition (mainly the carbon content) and the importance of the sintering cycle (particularly the cooling rate) are demonstrated. Moreover, various heat treatments studied illustrate the different microstructures achievable for this system, showing various amounts of cementite, pearlite and free graphite. Although the machinability is limited for samples containing large amounts of cementite, it can be greatly improved with very slow cooling, leading to graphitization of the carbon in presence of phosphorus. Adequate control of the sintering cycle on samples made from FGS1625 powder leads to the obtention of high density (≥7.0 g/cm 3) microstructures containing various amounts of pearlite, ferrite and free graphite. Obtaining ferritic microstructures with free graphite designed for very high machinability (tool wear <1.0%) or fine pearlitic microstructures with excellent mechanical properties (transverse rupture strength >1600 MPa) is therefore possible. These results show that improvement of machinability through higher densities is limited by microstructure. Indeed, for the studied samples, microstructure is dominant in the determination of machinability, far more important than density, judging by the influence of cementite or of the volume fraction of free graphite on machinability for example. (Abstract shortened by UMI.)
590 $a School code: 1105.
650 4 $a Engineering, Materials Science. $3 1017759
650 4 $a Engineering, Metallurgy. $3 1023648
690 $a 0743
690 $a 0794
710 2 $a Ecole Polytechnique, Montreal (Canada). $3 1018606
773 0 $t Dissertation Abstracts International $g 70-03B.
790 $a 1105
791 $a Ph.D.
792 $a 2009
793 $a French
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=NR47716