東華大學圖書館 |

Proceedings of the 13th International Conference on Advanced Materials and Engineering Materials = ICAMEM2024, 16-18 December, Dubai, UAE /

Record Type:	Electronic resources : Monograph/item
Title/Author:	Proceedings of the 13th International Conference on Advanced Materials and Engineering Materials/ edited by Laichang Zhang.
Reminder of title:	ICAMEM2024, 16-18 December, Dubai, UAE /
remainder title:	ICAMEM 2024
other author:	Zhang, Laichang.
corporate name:	International Conference on Advanced Materials and Engineering Materials
Published:	Singapore :Springer Nature Singapore : : 2025.,
Description:	xix, 921 p. :ill., digital ;24 cm.
[NT 15003449]:	Part I: Materials Characterization and Mechanical Properties -- 1. Fracture behavior of epoxy resin and PMMA applied in reparation of concrete crack -- 2. Mechanical characteristics of ferrochrome slag, crushed block, and crushed rock as coarse aggregate -- 3. Influence of Heat Treatment Process On the Microstructure and Property of Fe-14Cr-4Mo-13Co Alloy -- 4. Strength Calculation and Deformation Analysis of the Main Bearing Cap of a Diesel Engine -- 5. Comprehensive analysis on orthopedic drilling -- 6. Mechanical properties of materials improved by warm laser shock peening: A review -- 7. Laser shock peening: developments and mechanical property enhancements -- 8. Study of the formation of the structure and properties of economically alloyed steel with increased strength and cold resistance after hardening -- 9. Failure prediction model of Polyamide based on acoustic emission technology -- 10. Research on Accelerated Equation and Life Prediction Method for Rubber Materials with Impact Degradation Characteristics -- 11. Observation of wear and single surface crack growth in PEEK thrust bearing under rolling contact fatigue in water -- 12. The Effect of Grain Size and Crystallographic Orientation on the Etching Behavior of High-Strength and High-Conductivity Cu-Ti Alloys -- 13. Study on the Mechanical Properties of Engineered Cementitious Composites (ECC) Prepared with Coal Gangue Sand -- 14. Mechanical behavior of frozen compacted clay soils at various remoulding water contents -- 15. Research on the Microstructure and Thermal Compression Behavior of 60NiTi Alloy Manufactured by Vacuum Levitation Melting -- 16. Effect of quenching temperature on microstructure and properties of high cobalt molybdenum stainless bearing steel -- 17. A frontal collision study of a dummy based on the latest Chinese body size -- 18. Measurement of Fatigue Crack on PEEK Radial Bearings under Water and Dry Repeated Conditions -- 19. Mechanical characterization of the spleen based on animal experiments: development of a dummy spleen model -- 20. The effect of solution temperature on the microstructure and properties of the 3J40 alloy -- 21. Hot Deformation and Recrystallization Behavior of a Novel Co-based superalloy -- 22. Effect of solid solution heat treatment Microstructure and properties of forged Gh3536 Superalloy -- 23. Research on fatigue crack growth of bellows expansion joints based on fracture mechanics -- 24. Creep-Fatigue Damage Analysis of Deep-Sea Vehicle Pressure Hulls Based on ABAQUS -- 25. Peculiarities of boron diffusion enrichment of semi-permeable structural powder steels alloyed with copper in semi-permeable saturating environment -- Part II: Advanced Coatings and Surface Treatments -- 26. The challenges, issues and prospects of thermal protection coatings -- 27. Laser shock processing and its mechanical performance improvement in select laser melted alloys -- 28. Study on the mechanism of microstructures and properties of different electrode cap materials in resistance spot welding -- 29. Modification study of Xanthan gum to improve the suspension capacity -- 30. Study on the synergistic effect of polyethylene glycol and conventional demulsifiers -- 31.Synthesis and Testing of Sound-Absorbing Performance for Underwater Target Sound-Absorbing Coating Materials.
Contained By:	Springer Nature eBook
Subject:	Mechanical engineering - Congresses. -
Online resource:	https://doi.org/10.1007/978-981-96-5765-0
ISBN:	9789819657650

Proceedings of the 13th International Conference on Advanced Materials and Engineering Materials = ICAMEM2024, 16-18 December, Dubai, UAE /
Proceedings of the 13th International Conference on Advanced Materials and Engineering MaterialsICAMEM2024, 16-18 December, Dubai, UAE /[electronic resource] :ICAMEM 2024edited by Laichang Zhang. - Singapore :Springer Nature Singapore :2025. - xix, 921 p. :ill., digital ;24 cm. - Springer proceedings in physics,v. 3241867-4941 ;. - Springer proceedings in physics ;v. 324..

Part I: Materials Characterization and Mechanical Properties -- 1. Fracture behavior of epoxy resin and PMMA applied in reparation of concrete crack -- 2. Mechanical characteristics of ferrochrome slag, crushed block, and crushed rock as coarse aggregate -- 3. Influence of Heat Treatment Process On the Microstructure and Property of Fe-14Cr-4Mo-13Co Alloy -- 4. Strength Calculation and Deformation Analysis of the Main Bearing Cap of a Diesel Engine -- 5. Comprehensive analysis on orthopedic drilling -- 6. Mechanical properties of materials improved by warm laser shock peening: A review -- 7. Laser shock peening: developments and mechanical property enhancements -- 8. Study of the formation of the structure and properties of economically alloyed steel with increased strength and cold resistance after hardening -- 9. Failure prediction model of Polyamide based on acoustic emission technology -- 10. Research on Accelerated Equation and Life Prediction Method for Rubber Materials with Impact Degradation Characteristics -- 11. Observation of wear and single surface crack growth in PEEK thrust bearing under rolling contact fatigue in water -- 12. The Effect of Grain Size and Crystallographic Orientation on the Etching Behavior of High-Strength and High-Conductivity Cu-Ti Alloys -- 13. Study on the Mechanical Properties of Engineered Cementitious Composites (ECC) Prepared with Coal Gangue Sand -- 14. Mechanical behavior of frozen compacted clay soils at various remoulding water contents -- 15. Research on the Microstructure and Thermal Compression Behavior of 60NiTi Alloy Manufactured by Vacuum Levitation Melting -- 16. Effect of quenching temperature on microstructure and properties of high cobalt molybdenum stainless bearing steel -- 17. A frontal collision study of a dummy based on the latest Chinese body size -- 18. Measurement of Fatigue Crack on PEEK Radial Bearings under Water and Dry Repeated Conditions -- 19. Mechanical characterization of the spleen based on animal experiments: development of a dummy spleen model -- 20. The effect of solution temperature on the microstructure and properties of the 3J40 alloy -- 21. Hot Deformation and Recrystallization Behavior of a Novel Co-based superalloy -- 22. Effect of solid solution heat treatment Microstructure and properties of forged Gh3536 Superalloy -- 23. Research on fatigue crack growth of bellows expansion joints based on fracture mechanics -- 24. Creep-Fatigue Damage Analysis of Deep-Sea Vehicle Pressure Hulls Based on ABAQUS -- 25. Peculiarities of boron diffusion enrichment of semi-permeable structural powder steels alloyed with copper in semi-permeable saturating environment -- Part II: Advanced Coatings and Surface Treatments -- 26. The challenges, issues and prospects of thermal protection coatings -- 27. Laser shock processing and its mechanical performance improvement in select laser melted alloys -- 28. Study on the mechanism of microstructures and properties of different electrode cap materials in resistance spot welding -- 29. Modification study of Xanthan gum to improve the suspension capacity -- 30. Study on the synergistic effect of polyethylene glycol and conventional demulsifiers -- 31.Synthesis and Testing of Sound-Absorbing Performance for Underwater Target Sound-Absorbing Coating Materials.

This book contains the proceedings of the 13th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2024), which was held in Dubai, UAE, from December 16 to 18, 2024. Over the past 12 years, ICAMEM has established itself as a leading platform for sharing current and emerging materials and devices research. The conference program for the year includes a diverse range of sessions, featuring Plenary, Keynote, Invited, and Oral presentations. Esteemed speakers, including Prof. Weimin Huang from Nanyang Technological University, Singapore; Prof. Katsuyuki Kida from University of Toyama, Japan; Prof. Ali Reza Kamali from Northeastern University, China; Prof. Laichang Zhang from School of Engineering, Edith Cowan University, Perth, Australia delivered keynote addresses. Dr. Hamid Pourasiab from The University of Queensland, Australia; Dr. Parvez Alam from The University of Edinburgh, UK presented invited talks. ICAMEM 2024 provides an attractive forum for researchers, engineers, and industry professionals to present their latest advancements in materials research and development. This book serves as a comprehensive overview of the conference, offering valuable insights into the state and future directions of the field. In summary, this book is an indispensable resource for those seeking to stay informed about the latest research and developments in advanced materials and engineering materials, as showcased at ICAMEM 2024.

ISBN: 9789819657650

Standard No.: 10.1007/978-981-96-5765-0doiSubjects--Topical Terms:

852715
Mechanical engineering
--Congresses.

LC Class. No.: TJ5

Dewey Class. No.: 621

Proceedings of the 13th International Conference on Advanced Materials and Engineering Materials = ICAMEM2024, 16-18 December, Dubai, UAE /
LDR:05937nmm a2200349 a 4500 001 2414437
003 DE-He213
005 20250901130300.0
006 m d
007 cr nn 008maaau
008 260205s2025 si s 0 eng d
020 $a 9789819657650 $q (electronic bk.)
020 $a 9789819657643 $q (paper)
024 7 $a 10.1007/978-981-96-5765-0 $2 doi
035 $a 978-981-96-5765-0
040 $a GP $c GP
041 0 $a eng
050 4 $a TJ5
072 7 $a PHFC $2 bicssc
072 7 $a SCI077000 $2 bisacsh
072 7 $a PHFC $2 thema
082 0 4 $a 621 $2 23
090 $a TJ5 $b .I61 2024
111 2 $a International Conference on Advanced Materials and Engineering Materials $n (13th : $d 2024 : $c Dubayy, United Arab Emirates) $3 3791115
245 1 0 $a Proceedings of the 13th International Conference on Advanced Materials and Engineering Materials $h [electronic resource] : $b ICAMEM2024, 16-18 December, Dubai, UAE / $c edited by Laichang Zhang.
246 3 $a ICAMEM 2024
260 $a Singapore : $b Springer Nature Singapore : $b Imprint: Springer, $c 2025.
300 $a xix, 921 p. : $b ill., digital ; $c 24 cm.
490 1 $a Springer proceedings in physics, $x 1867-4941 ; $v v. 324
505 0 $a Part I: Materials Characterization and Mechanical Properties -- 1. Fracture behavior of epoxy resin and PMMA applied in reparation of concrete crack -- 2. Mechanical characteristics of ferrochrome slag, crushed block, and crushed rock as coarse aggregate -- 3. Influence of Heat Treatment Process On the Microstructure and Property of Fe-14Cr-4Mo-13Co Alloy -- 4. Strength Calculation and Deformation Analysis of the Main Bearing Cap of a Diesel Engine -- 5. Comprehensive analysis on orthopedic drilling -- 6. Mechanical properties of materials improved by warm laser shock peening: A review -- 7. Laser shock peening: developments and mechanical property enhancements -- 8. Study of the formation of the structure and properties of economically alloyed steel with increased strength and cold resistance after hardening -- 9. Failure prediction model of Polyamide based on acoustic emission technology -- 10. Research on Accelerated Equation and Life Prediction Method for Rubber Materials with Impact Degradation Characteristics -- 11. Observation of wear and single surface crack growth in PEEK thrust bearing under rolling contact fatigue in water -- 12. The Effect of Grain Size and Crystallographic Orientation on the Etching Behavior of High-Strength and High-Conductivity Cu-Ti Alloys -- 13. Study on the Mechanical Properties of Engineered Cementitious Composites (ECC) Prepared with Coal Gangue Sand -- 14. Mechanical behavior of frozen compacted clay soils at various remoulding water contents -- 15. Research on the Microstructure and Thermal Compression Behavior of 60NiTi Alloy Manufactured by Vacuum Levitation Melting -- 16. Effect of quenching temperature on microstructure and properties of high cobalt molybdenum stainless bearing steel -- 17. A frontal collision study of a dummy based on the latest Chinese body size -- 18. Measurement of Fatigue Crack on PEEK Radial Bearings under Water and Dry Repeated Conditions -- 19. Mechanical characterization of the spleen based on animal experiments: development of a dummy spleen model -- 20. The effect of solution temperature on the microstructure and properties of the 3J40 alloy -- 21. Hot Deformation and Recrystallization Behavior of a Novel Co-based superalloy -- 22. Effect of solid solution heat treatment Microstructure and properties of forged Gh3536 Superalloy -- 23. Research on fatigue crack growth of bellows expansion joints based on fracture mechanics -- 24. Creep-Fatigue Damage Analysis of Deep-Sea Vehicle Pressure Hulls Based on ABAQUS -- 25. Peculiarities of boron diffusion enrichment of semi-permeable structural powder steels alloyed with copper in semi-permeable saturating environment -- Part II: Advanced Coatings and Surface Treatments -- 26. The challenges, issues and prospects of thermal protection coatings -- 27. Laser shock processing and its mechanical performance improvement in select laser melted alloys -- 28. Study on the mechanism of microstructures and properties of different electrode cap materials in resistance spot welding -- 29. Modification study of Xanthan gum to improve the suspension capacity -- 30. Study on the synergistic effect of polyethylene glycol and conventional demulsifiers -- 31.Synthesis and Testing of Sound-Absorbing Performance for Underwater Target Sound-Absorbing Coating Materials.
520 $a This book contains the proceedings of the 13th International Conference on Advanced Materials and Engineering Materials (ICAMEM 2024), which was held in Dubai, UAE, from December 16 to 18, 2024. Over the past 12 years, ICAMEM has established itself as a leading platform for sharing current and emerging materials and devices research. The conference program for the year includes a diverse range of sessions, featuring Plenary, Keynote, Invited, and Oral presentations. Esteemed speakers, including Prof. Weimin Huang from Nanyang Technological University, Singapore; Prof. Katsuyuki Kida from University of Toyama, Japan; Prof. Ali Reza Kamali from Northeastern University, China; Prof. Laichang Zhang from School of Engineering, Edith Cowan University, Perth, Australia delivered keynote addresses. Dr. Hamid Pourasiab from The University of Queensland, Australia; Dr. Parvez Alam from The University of Edinburgh, UK presented invited talks. ICAMEM 2024 provides an attractive forum for researchers, engineers, and industry professionals to present their latest advancements in materials research and development. This book serves as a comprehensive overview of the conference, offering valuable insights into the state and future directions of the field. In summary, this book is an indispensable resource for those seeking to stay informed about the latest research and developments in advanced materials and engineering materials, as showcased at ICAMEM 2024.
650 0 $a Mechanical engineering $v Congresses. $3 852715
650 0 $a Dynamics $x Congresses. $3 543286
650 1 4 $a Condensed Matter Physics. $3 1067080
650 2 4 $a Materials Characterization Technique. $3 3591940
650 2 4 $a Nanoengineering. $3 3591856
650 2 4 $a Polymer Synthesis. $3 3594475
650 2 4 $a Structural Materials. $3 898417
650 2 4 $a Surface and Interface and Thin Film. $3 3593579
700 1 $a Zhang, Laichang. $3 3724900
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Springer proceedings in physics ; $v v. 324. $3 3791116
856 4 0 $u https://doi.org/10.1007/978-981-96-5765-0
950 $a Physics and Astronomy (SpringerNature-11651)