東華大學圖書館 |

The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites.

Record Type:	Electronic resources : Monograph/item
Title/Author:	The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites./
Author:	Greenough, Stephanie.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2022,
Description:	111 p.
Notes:	Source: Masters Abstracts International, Volume: 84-05.
Contained By:	Masters Abstracts International84-05.
Subject:	Manures. -
Online resource:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30157853
ISBN:	9798352987711

The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites.
Greenough, Stephanie.

The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites. - Ann Arbor : ProQuest Dissertations & Theses, 2022 - 111 p.

Source: Masters Abstracts International, Volume: 84-05.

Thesis (M.Sc.)--McGill University (Canada), 2022.

Bio-based alternatives to non-renewable, non-sustainable materials in composites has gained considerable attention in recent decades. Biochar, a bio-sourced material, can be synthesized from nearly any feedstock. Biochar physicochemical properties vary based on the feedstock source and the pyrolysis operating conditions. The subject of this thesis is the synthesis and characterization of biochar from non-lignocellulosic feedstocks such as chicken feather meal, municipal wastewater sludge, and canola protein. The suitability of biochar as reinforcing fillers in styrene-butadiene rubber composites was assessed based on the biochar filled rubber vulcanization behavior, morphology, tensile, and dynamic mechanical properties. Biochar from non-lignocellulosic feedstocks was evaluated as a substitute for carbon black in rubber tire applications.As part of this thesis, chicken feather meal and municipal wastewater sludge were converted into biochar using a batch pyrolysis unit. The effects of the feedstock source and the pyrolysis temperature on the physicochemical properties of the biochar were studied. The biochars were then added to the styrene-butadiene rubber mix to produce bio-based filled rubber composites. Results showed that among other properties, the biochar had lower carbon and higher ash content, lower surface area, and larger particle sizes compared to carbon black. These unfavorable properties resulted in the inability of the biochar to reinforce the rubber. The dynamic mechanical analysis confirmed the strong filler-filler interactions, and a lower tendency for filler-rubber interactions, which was attributed to biochar physicochemical properties. Therefore, without further modification, chicken feather meal and municipal wastewater sludge were not suitable alternatives for carbon black in styrene-butadiene rubber composites.In a second study, chicken feather meal and canola protein were evaluated as potential renewable fillers in styrene-butadiene rubber composites. It was found that steam activated biochar had improved physicochemical properties compared to the biochar in the previous study. This translated into improved tensile properties. The results of the dynamic mechanical analysis showed that canola protein pyrolyzed under nitrogen and subsequently steam cooled behaved similarly to carbon black. The slight differences were not large enough to explain the much lower reinforcement of the biochar. Further research is required to assess whether biochar surface modification can improve the compatibility with rubber.

ISBN: 9798352987711Subjects--Topical Terms:

2084683
Manures.

The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites.
LDR:06933nmm a2200409 4500 001 2401256
005 20241022112116.5
006 m o d
007 cr#unu||||||||
008 251215s2022 ||||||||||||||||| ||eng d
020 $a 9798352987711
035 $a (MiAaPQ)AAI30157853
035 $a (MiAaPQ)McGill_q524jt69g
035 $a AAI30157853
035 $a 2401256
040 $a MiAaPQ $c MiAaPQ
100 1 $a Greenough, Stephanie. $3 3771338
245 1 0 $a The Suitability of Biochar From Non-Lignocellulosic Feedstocks as Potential Bio-Based Reinforcing Fillers in Rubber Composites.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2022
300 $a 111 p.
500 $a Source: Masters Abstracts International, Volume: 84-05.
500 $a Advisor: Dumont, Marie-Josee;Prasher, Shiv.
502 $a Thesis (M.Sc.)--McGill University (Canada), 2022.
520 $a Bio-based alternatives to non-renewable, non-sustainable materials in composites has gained considerable attention in recent decades. Biochar, a bio-sourced material, can be synthesized from nearly any feedstock. Biochar physicochemical properties vary based on the feedstock source and the pyrolysis operating conditions. The subject of this thesis is the synthesis and characterization of biochar from non-lignocellulosic feedstocks such as chicken feather meal, municipal wastewater sludge, and canola protein. The suitability of biochar as reinforcing fillers in styrene-butadiene rubber composites was assessed based on the biochar filled rubber vulcanization behavior, morphology, tensile, and dynamic mechanical properties. Biochar from non-lignocellulosic feedstocks was evaluated as a substitute for carbon black in rubber tire applications.As part of this thesis, chicken feather meal and municipal wastewater sludge were converted into biochar using a batch pyrolysis unit. The effects of the feedstock source and the pyrolysis temperature on the physicochemical properties of the biochar were studied. The biochars were then added to the styrene-butadiene rubber mix to produce bio-based filled rubber composites. Results showed that among other properties, the biochar had lower carbon and higher ash content, lower surface area, and larger particle sizes compared to carbon black. These unfavorable properties resulted in the inability of the biochar to reinforce the rubber. The dynamic mechanical analysis confirmed the strong filler-filler interactions, and a lower tendency for filler-rubber interactions, which was attributed to biochar physicochemical properties. Therefore, without further modification, chicken feather meal and municipal wastewater sludge were not suitable alternatives for carbon black in styrene-butadiene rubber composites.In a second study, chicken feather meal and canola protein were evaluated as potential renewable fillers in styrene-butadiene rubber composites. It was found that steam activated biochar had improved physicochemical properties compared to the biochar in the previous study. This translated into improved tensile properties. The results of the dynamic mechanical analysis showed that canola protein pyrolyzed under nitrogen and subsequently steam cooled behaved similarly to carbon black. The slight differences were not large enough to explain the much lower reinforcement of the biochar. Further research is required to assess whether biochar surface modification can improve the compatibility with rubber.
520 $a Au cours des dernieres decennies, des alternatives biosources ont suscite un interet considerable en tant que substituts pour les materiaux non renouvelables dans les composites. Le biochar, un materiel biosource, peut etre synthetise a partir de quasiment tous les types de biomasse. Les proprietes physico-chimiques du biochar varient en fonction de la source de la biomasse et selon les configurations de la pyrolyse. Le sujet de cette these porte sur la synthese et la caracterisation des biochars produits a partir de residus de biomasses non-lignocellulosiques telles que la farine de plumes de poulet, les boues d'epuration municipales, et les proteines de canola. Une analyse de la vulcanisation, de la morphologie, de la traction, et de la mecanique dynamique a ete realisee afin de determiner si le biochar peut etre utilise comme charges renforcantes dans les composites de caoutchouc styrene-butadiene. Biochar provenant de residus de biomasses non-lignocellulosiques a ete evalue comme substitut au noir de carbone dans les pneumatiques.Dans le cadre de ce memoire, de la farine de plumes de poulet et des boues d'epuration municipales ont ete converties en biochar a l'aide d'un reacteur de pyrolyse. Les effets de la source de la biomasse et de la temperature de pyrolyse sur les proprietes physico-chimiques du biochar furent etudies. Le biochar a ensuite ete ajoute au composite de caoutchouc styrene-butadiene pour produire un composite de caoutchouc avec renforts biosources. Les resultats ont montre que, parmi d'autres proprietes, le biochar avait une teneur plus faible en carbone et plus elevee en cendres, une surface plus faible et des particules de plus grande taille que le noir de carbone. Ces proprietes defavorables ont entraine l'incapacite du biochar a renforcer le caoutchouc. L'analyse mecanique dynamique a confirme les fortes interactions entre les charges, et une tendance plus faible pour les interactions entre les charges et le caoutchouc, ce qui a ete attribue aux proprietes physico-chimiques du biochar. Par consequent, sans modification supplementaire, la farine de plumes de poulet et les boues d'epuration municipales ne sont pas des alternatives appropriees au noir de carbone dans les composites de caoutchouc styrene-butadiene.Dans une deuxieme etude, la farine de plumes de poulet et les proteines de canola ont ete evaluees comme charges renouvelables potentielles dans les composites de caoutchouc styrene-butadiene. Il a ete constate que le biochar active a la vapeur avait des proprietes physico-chimiques ameliorees par rapport au biochar de l'etude precedente. Cela s'est traduit par une amelioration des proprietes de traction. Les resultats de l'analyse mecanique dynamique ont montre que les proteines de canola pyrolysees sous azote et ensuite refroidies a la vapeur se comportaient de maniere similaire au noir de carbone. Les legeres differences n'etaient pas assez importantes pour expliquer le renforcement beaucoup plus faible du biochar. Des recherches supplementaires sont necessaires pour evaluer si la modification de la surface du biochar peut ameliorer la compatibilite avec le caoutchouc.
590 $a School code: 0781.
650 4 $a Manures. $3 2084683
650 4 $a Polymers. $3 535398
650 4 $a Rubber. $3 1005354
650 4 $a Carbon black. $3 3681396
650 4 $a Tensile strength. $3 3564816
650 4 $a Hydrocarbons. $3 697428
650 4 $a Agricultural production. $3 3559355
650 4 $a Lignin. $3 1097216
650 4 $a Ingredients. $3 3564179
650 4 $a Waste materials. $3 3554636
650 4 $a Cellulose. $3 588995
650 4 $a Rice. $3 649844
650 4 $a Heat. $3 573595
650 4 $a Canola. $3 3681510
650 4 $a Biomass. $3 1013462
650 4 $a Tires. $3 3386749
650 4 $a Synthesis gas. $3 675389
650 4 $a Research & development--R&D. $3 3554335
650 4 $a Curing. $3 3681399
650 4 $a Editing. $3 601456
650 4 $a Composite materials. $3 654082
650 4 $a Barley. $3 3564839
650 4 $a Agriculture. $3 518588
650 4 $a Agronomy. $3 2122783
650 4 $a Chemical engineering. $3 560457
650 4 $a Materials science. $3 543314
650 4 $a Mechanics. $3 525881
650 4 $a Physics. $3 516296
650 4 $a Polymer chemistry. $3 3173488
690 $a 0473
690 $a 0285
690 $a 0542
690 $a 0794
690 $a 0346
690 $a 0605
690 $a 0495
710 2 $a McGill University (Canada). $3 1018122
773 0 $t Masters Abstracts International $g 84-05.
790 $a 0781
791 $a M.Sc.
792 $a 2022
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30157853