東華大學圖書館 |

Rotating machinery, optical methods & scanning LDV methods. = proceedings of the 40th IMAC, a conference and exposition on structural dynamics 2022 /. Volume 6

Record Type:	Electronic resources : Monograph/item
Title/Author:	Rotating machinery, optical methods & scanning LDV methods./ edited by Dario Di Maio, Javad Baqersad.
Reminder of title:	proceedings of the 40th IMAC, a conference and exposition on structural dynamics 2022 /
other author:	Di Maio, Dario.
corporate name:	International Modal Analysis Conference
Published:	Cham :Sp.ringer International Publishing : : 2023.,
Description:	viii, 185 p. :ill. (chiefly color), digital ;24 cm.
[NT 15003449]:	Chapter 1. Introduction to Multipath Doppler Vibrometry (MDV) for Validating Complex Models Accurately and Without Contact -- Chapter 2. DIC Using Low Speed Cameras on a Scaled Wind Turbine Blade -- Chapter 3. Data Challenges for Structural Health Monitoring of Electrical Machines -- Chapter 4. Neuromorphic Data Processing for Event-Driven Imagery for Acoustic Measurements -- Chapter 5. Template Matching and Particle Filtering for Structural Identification of High and Low Frequency Vibration -- Chapter 6. Multi-Sensor Collaborative Sampling Schemes to Reconstruct Undersampled Mechanical System Signals for Machinery Fault Detection -- Chapter 7. Regime Sorting for Multiscale Vibrations and Phase-Based Motion Extraction -- Chapter 8. Digital Image Correlation with a Neuromorphic Event-based Imager -- Chapter 9. Monitoring the Response of Electrical Components during Environmental Vibration Tests Using a Scanning Laser Doppler Vibrometer -- Chapter 10. Advanced Mesh Reconstruction with Low Budget RGBD-Hardware for Modal Analysis with the Software WaveImage -- Chapter 11. Stereoscopic High Speed Camera Based Operational Modal Analysis using a One-camera Setup -- Chapter 12. In-plane Vibration Measurement of an Aluminum Plate Using a Three-dimensional Continuously Scanning Laser Doppler Vibrometer System -- Chapter 13. Measuring Full-Field Deformation in Ultra-High-Performance Concrete Structural Components using Tag-Based Robotic Vision -- Chapter 14. Dynamic Behaviour and Magneto-Mechanical Efficiency of a Contactless Magnetic Transmission -- Chapter 15. Structural Damage Identification for Plate-Like Structures Using Two-dimensional Teager Energy Operator-Wavelet Transform -- Chapter 16. A Vision-based Quantification Approach for Reinforced Concrete Tunnel Liner Delamination -- Chapter 17. An Optical Temporal and Spatial Vibration-Based Damage Detection Using Convolutional Neural Networks and Long Short-Term Memory -- Chapter 18. A Hybrid-Attention-LSTM-Based Deep Convolutional Neural Network to Extract Modal Frequencies from Limited Dataset Using Transfer Learning -- Chapter 19. Detecting and Reconstructing the 3D Geometry of Subsurface Structural Damage Using Full-Field Image-Based Sensing and Topology Optimization -- Chapter 20. Optimal Kernel Design for the Extraction of Subtle Motions Using Convolutional Neural Network.
Contained By:	Springer Nature eBook
Subject:	Structural dynamics - Congresses. -
Online resource:	https://doi.org/10.1007/978-3-031-04098-6
ISBN:	9783031040986

Rotating machinery, optical methods & scanning LDV methods. = proceedings of the 40th IMAC, a conference and exposition on structural dynamics 2022 /. Volume 6
Rotating machinery, optical methods & scanning LDV methods.proceedings of the 40th IMAC, a conference and exposition on structural dynamics 2022 /Volume 6[electronic resource] :edited by Dario Di Maio, Javad Baqersad. - Cham :Sp.ringer International Publishing :2023. - viii, 185 p. :ill. (chiefly color), digital ;24 cm. - Conference proceedings of the society for experimental mechanics series,2191-5652. - Conference proceedings of the society for experimental mechanics series..

Chapter 1. Introduction to Multipath Doppler Vibrometry (MDV) for Validating Complex Models Accurately and Without Contact -- Chapter 2. DIC Using Low Speed Cameras on a Scaled Wind Turbine Blade -- Chapter 3. Data Challenges for Structural Health Monitoring of Electrical Machines -- Chapter 4. Neuromorphic Data Processing for Event-Driven Imagery for Acoustic Measurements -- Chapter 5. Template Matching and Particle Filtering for Structural Identification of High and Low Frequency Vibration -- Chapter 6. Multi-Sensor Collaborative Sampling Schemes to Reconstruct Undersampled Mechanical System Signals for Machinery Fault Detection -- Chapter 7. Regime Sorting for Multiscale Vibrations and Phase-Based Motion Extraction -- Chapter 8. Digital Image Correlation with a Neuromorphic Event-based Imager -- Chapter 9. Monitoring the Response of Electrical Components during Environmental Vibration Tests Using a Scanning Laser Doppler Vibrometer -- Chapter 10. Advanced Mesh Reconstruction with Low Budget RGBD-Hardware for Modal Analysis with the Software WaveImage -- Chapter 11. Stereoscopic High Speed Camera Based Operational Modal Analysis using a One-camera Setup -- Chapter 12. In-plane Vibration Measurement of an Aluminum Plate Using a Three-dimensional Continuously Scanning Laser Doppler Vibrometer System -- Chapter 13. Measuring Full-Field Deformation in Ultra-High-Performance Concrete Structural Components using Tag-Based Robotic Vision -- Chapter 14. Dynamic Behaviour and Magneto-Mechanical Efficiency of a Contactless Magnetic Transmission -- Chapter 15. Structural Damage Identification for Plate-Like Structures Using Two-dimensional Teager Energy Operator-Wavelet Transform -- Chapter 16. A Vision-based Quantification Approach for Reinforced Concrete Tunnel Liner Delamination -- Chapter 17. An Optical Temporal and Spatial Vibration-Based Damage Detection Using Convolutional Neural Networks and Long Short-Term Memory -- Chapter 18. A Hybrid-Attention-LSTM-Based Deep Convolutional Neural Network to Extract Modal Frequencies from Limited Dataset Using Transfer Learning -- Chapter 19. Detecting and Reconstructing the 3D Geometry of Subsurface Structural Damage Using Full-Field Image-Based Sensing and Topology Optimization -- Chapter 20. Optimal Kernel Design for the Extraction of Subtle Motions Using Convolutional Neural Network.

Rotating Machinery, Optical Methods & Scanning LDV Methods, Volume 6: Proceedings of the 40th IMAC, A Conference and Exposition on Structural Dynamics, 2022, the sixth volume of nine from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Health Monitoring, including papers on: Novel Techniques Optical Methods, Scanning LDV Methods Photogrammetry & DIC Rotating Machinery.

ISBN: 9783031040986

Standard No.: 10.1007/978-3-031-04098-6doiSubjects--Topical Terms:

664540
Structural dynamics
--Congresses.

LC Class. No.: TA654

Dewey Class. No.: 624.171

Rotating machinery, optical methods & scanning LDV methods. = proceedings of the 40th IMAC, a conference and exposition on structural dynamics 2022 /. Volume 6
LDR:04085nmm a2200337 a 4500 001 2314565
003 DE-He213
005 20220705162830.0
006 m d
007 cr nn 008maaau
008 230902s2023 sz s 0 eng d
020 $a 9783031040986 $q (electronic bk.)
020 $a 9783031040979 $q (paper)
024 7 $a 10.1007/978-3-031-04098-6 $2 doi
035 $a 978-3-031-04098-6
040 $a GP $c GP
041 0 $a eng
050 4 $a TA654
072 7 $a TGB $2 bicssc
072 7 $a TEC046000 $2 bisacsh
072 7 $a TGB $2 thema
082 0 4 $a 624.171 $2 23
090 $a TA654 $b .I61 2022
111 2 $a International Modal Analysis Conference $n (40th : $d 2022) $3 3603131
245 1 0 $a Rotating machinery, optical methods & scanning LDV methods. $n Volume 6 $h [electronic resource] : $b proceedings of the 40th IMAC, a conference and exposition on structural dynamics 2022 / $c edited by Dario Di Maio, Javad Baqersad.
260 $a Cham : $b Sp.ringer International Publishing : $b Imprint: Springer, $c 2023.
300 $a viii, 185 p. : $b ill. (chiefly color), digital ; $c 24 cm.
490 1 $a Conference proceedings of the society for experimental mechanics series, $x 2191-5652
505 0 $a Chapter 1. Introduction to Multipath Doppler Vibrometry (MDV) for Validating Complex Models Accurately and Without Contact -- Chapter 2. DIC Using Low Speed Cameras on a Scaled Wind Turbine Blade -- Chapter 3. Data Challenges for Structural Health Monitoring of Electrical Machines -- Chapter 4. Neuromorphic Data Processing for Event-Driven Imagery for Acoustic Measurements -- Chapter 5. Template Matching and Particle Filtering for Structural Identification of High and Low Frequency Vibration -- Chapter 6. Multi-Sensor Collaborative Sampling Schemes to Reconstruct Undersampled Mechanical System Signals for Machinery Fault Detection -- Chapter 7. Regime Sorting for Multiscale Vibrations and Phase-Based Motion Extraction -- Chapter 8. Digital Image Correlation with a Neuromorphic Event-based Imager -- Chapter 9. Monitoring the Response of Electrical Components during Environmental Vibration Tests Using a Scanning Laser Doppler Vibrometer -- Chapter 10. Advanced Mesh Reconstruction with Low Budget RGBD-Hardware for Modal Analysis with the Software WaveImage -- Chapter 11. Stereoscopic High Speed Camera Based Operational Modal Analysis using a One-camera Setup -- Chapter 12. In-plane Vibration Measurement of an Aluminum Plate Using a Three-dimensional Continuously Scanning Laser Doppler Vibrometer System -- Chapter 13. Measuring Full-Field Deformation in Ultra-High-Performance Concrete Structural Components using Tag-Based Robotic Vision -- Chapter 14. Dynamic Behaviour and Magneto-Mechanical Efficiency of a Contactless Magnetic Transmission -- Chapter 15. Structural Damage Identification for Plate-Like Structures Using Two-dimensional Teager Energy Operator-Wavelet Transform -- Chapter 16. A Vision-based Quantification Approach for Reinforced Concrete Tunnel Liner Delamination -- Chapter 17. An Optical Temporal and Spatial Vibration-Based Damage Detection Using Convolutional Neural Networks and Long Short-Term Memory -- Chapter 18. A Hybrid-Attention-LSTM-Based Deep Convolutional Neural Network to Extract Modal Frequencies from Limited Dataset Using Transfer Learning -- Chapter 19. Detecting and Reconstructing the 3D Geometry of Subsurface Structural Damage Using Full-Field Image-Based Sensing and Topology Optimization -- Chapter 20. Optimal Kernel Design for the Extraction of Subtle Motions Using Convolutional Neural Network.
520 $a Rotating Machinery, Optical Methods & Scanning LDV Methods, Volume 6: Proceedings of the 40th IMAC, A Conference and Exposition on Structural Dynamics, 2022, the sixth volume of nine from the Conference brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Health Monitoring, including papers on: Novel Techniques Optical Methods, Scanning LDV Methods Photogrammetry & DIC Rotating Machinery.
650 0 $a Structural dynamics $x Congresses. $3 664540
650 0 $a Mechanical engineering $v Congresses. $3 852715
650 0 $a Rotational motion $x Congresses. $3 716814
650 1 4 $a Machinery and Machine Elements. $3 893855
650 2 4 $a Vehicle Engineering. $3 3592516
650 2 4 $a Optical Metrology. $3 3626081
650 2 4 $a Aerospace Technology and Astronautics. $3 928116
650 2 4 $a Multibody Systems and Mechanical Vibrations. $3 3595519
700 1 $a Di Maio, Dario. $3 3227158
700 1 $a Baqersad, Javad. $3 3185869
710 2 $a SpringerLink (Online service) $3 836513
773 0 $t Springer Nature eBook
830 0 $a Conference proceedings of the society for experimental mechanics series. $3 2054299
856 4 0 $u https://doi.org/10.1007/978-3-031-04098-6
950 $a Engineering (SpringerNature-11647)