東華大學圖書館 |

Fabrication, Characterization and Application of PZT-Silane Nano-Composite Thin-Film Sensors and Actuators.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Fabrication, Characterization and Application of PZT-Silane Nano-Composite Thin-Film Sensors and Actuators./
Author:	Xu, Weiwei.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2019,
Description:	271 p.
Notes:	Source: Dissertations Abstracts International, Volume: 81-03, Section: B.
Contained By:	Dissertations Abstracts International81-03B.
Subject:	Mechanical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13900553
ISBN:	9781085731232

Fabrication, Characterization and Application of PZT-Silane Nano-Composite Thin-Film Sensors and Actuators.
Xu, Weiwei.

Fabrication, Characterization and Application of PZT-Silane Nano-Composite Thin-Film Sensors and Actuators. - Ann Arbor : ProQuest Dissertations & Theses, 2019 - 271 p.

Source: Dissertations Abstracts International, Volume: 81-03, Section: B.

Thesis (Ph.D.)--University of Washington, 2019.

This item must not be sold to any third party vendors.

Structural health monitoring (SHM) plays a very important role in improving structural safety, preventing catastrophic failures and lowering maintenance costs. Current sensing methods have some limitations, such as being bulky, heavy, or brittle, making them unsuitable for SHM of composite structures. In response to the need for a flexible, printable sensor with low curing temperature, a nano-composite thin-film with additive manufacturing capability that consists of numerous lead-zirconate-titanate (PZT) nanoparticles embedded in a silane matrix is proposed and studied in this dissertation.This dissertation includes fabrication, characterization, and applications of proposed thin-films with rigid or flexible substrates and parallel-plate or interdigitated electrodes as piezoelectric actuators and sensors. Fabrication includes the following steps: First, PZT nanoparticles with size distribution ranging from 300 to 800 nanometers, are fabricated via hydrothermal synthesis.The PZT nanoparticles are then suspended in a silane-based fluid to form a PZT ink that can be printed, sprayed, or drop-cast onto a substrate. The deposited PZT ink is subsequently cured at low temperature (e.g., 120 °C) to form the PZT-silane thin- film sensor. A similar ink and thin-film sensor using crushed bulk PZT is also fabricated for comparison. The aerosol-jet printed results for both inks are provided and compared.Characterizing the material properties of the PZT-silane thin films includes two parts: dielectric and piezoelectric characterization. The dielectric constant and loss are measured through an impedance analyzer. Piezoelectric properties are estimated by applying a calibrated force directly onto the film while an accurate, double-end charge amplifier isolates and records the tiny induced charge from background electrical noise. A finite element model is created to simulate the experimental setup in order to estimate the piezoelectric coefficient d33 from the measurements.A PZT-silane nano-composite thin film with parallel-plate electrodes, drop-cast near the fixed edge of a thin flexible cantilever beam made of kapton, has been successfully demonstrated as an actuator. Velocity measurements at the free end are found to be in synchronization with actuation signals when driving the PZT-silane thin film actuator near natural frequencies of the beam. To demonstrate its validity as a vibration sensor, a PZT-silane thin film is attached to a square aluminum plate supported by four pillars. The frequency response of the charge measured from the PZT thin-film sensor is in close agreement with the vibration measurements from a laser Doppler vibrometer.PZT ink is drop-cast on a flexible substrate in two electrode formats for evaluation: parallel-plate and interdigitated electrodes (IDEs). The parallel-plate electrode format is difficult to implement, because silver electrodes cannot be properly printed onto the PZT film with high conductivity and dimension accuracy. In contrast, IDEs inkjet-printed onto a polyethylene terephthalate (PET) film demonstrate excellent resolution and conductivity. Sinusoidal voltage applied over the IDEs drives PZT thin-film with IDEs device into resonance serving as a resonator.PZT thin films with printed IDEs are demonstrated as vibration and strain sensors. Vibration tests are carried out on wing and beam structures with small angle oscillations. PZT thin-film with IDEs are attached on one side of these test structures and commercially acquired foil strain gauges on the other side for comparison and characterization. Strain and charge frequency domain measurements are recorded and amplitude peaks correlate to structural vibration frequencies. PZT-IDE sensor outputs at wing/beam oscillation frequency are found to increase with vibration amplitude and charge responses are approximately proportional to strain gauge outputs. This validates PZT-silane thin films with printed IDEs as strain sensors. The directional dependence of their sensing capability is demonstrated in theory, finite element analysis and experimentation. Two PZT-silane thin film devices with printed IDEs oriented 90 degrees apart show different sensitivities towards single-axis strain and experimentation proves PZT thin films with IDEs can distinguish strains in two dimensions.

ISBN: 9781085731232Subjects--Topical Terms:

649730
Mechanical engineering.
Subjects--Index Terms:

Inkject printed interdigitated electrodes

Fabrication, Characterization and Application of PZT-Silane Nano-Composite Thin-Film Sensors and Actuators.
LDR:05732nmm a2200397 4500 001 2270423
005 20200929060920.5
008 220629s2019 ||||||||||||||||| ||eng d
020 $a 9781085731232
035 $a (MiAaPQ)AAI13900553
035 $a AAI13900553
040 $a MiAaPQ $c MiAaPQ
100 1 $a Xu, Weiwei. $3 3173261
245 1 0 $a Fabrication, Characterization and Application of PZT-Silane Nano-Composite Thin-Film Sensors and Actuators.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2019
300 $a 271 p.
500 $a Source: Dissertations Abstracts International, Volume: 81-03, Section: B.
500 $a Advisor: Shen, I. Y. (Steve).
502 $a Thesis (Ph.D.)--University of Washington, 2019.
506 $a This item must not be sold to any third party vendors.
506 $a This item must not be added to any third party search indexes.
520 $a Structural health monitoring (SHM) plays a very important role in improving structural safety, preventing catastrophic failures and lowering maintenance costs. Current sensing methods have some limitations, such as being bulky, heavy, or brittle, making them unsuitable for SHM of composite structures. In response to the need for a flexible, printable sensor with low curing temperature, a nano-composite thin-film with additive manufacturing capability that consists of numerous lead-zirconate-titanate (PZT) nanoparticles embedded in a silane matrix is proposed and studied in this dissertation.This dissertation includes fabrication, characterization, and applications of proposed thin-films with rigid or flexible substrates and parallel-plate or interdigitated electrodes as piezoelectric actuators and sensors. Fabrication includes the following steps: First, PZT nanoparticles with size distribution ranging from 300 to 800 nanometers, are fabricated via hydrothermal synthesis.The PZT nanoparticles are then suspended in a silane-based fluid to form a PZT ink that can be printed, sprayed, or drop-cast onto a substrate. The deposited PZT ink is subsequently cured at low temperature (e.g., 120 °C) to form the PZT-silane thin- film sensor. A similar ink and thin-film sensor using crushed bulk PZT is also fabricated for comparison. The aerosol-jet printed results for both inks are provided and compared.Characterizing the material properties of the PZT-silane thin films includes two parts: dielectric and piezoelectric characterization. The dielectric constant and loss are measured through an impedance analyzer. Piezoelectric properties are estimated by applying a calibrated force directly onto the film while an accurate, double-end charge amplifier isolates and records the tiny induced charge from background electrical noise. A finite element model is created to simulate the experimental setup in order to estimate the piezoelectric coefficient d33 from the measurements.A PZT-silane nano-composite thin film with parallel-plate electrodes, drop-cast near the fixed edge of a thin flexible cantilever beam made of kapton, has been successfully demonstrated as an actuator. Velocity measurements at the free end are found to be in synchronization with actuation signals when driving the PZT-silane thin film actuator near natural frequencies of the beam. To demonstrate its validity as a vibration sensor, a PZT-silane thin film is attached to a square aluminum plate supported by four pillars. The frequency response of the charge measured from the PZT thin-film sensor is in close agreement with the vibration measurements from a laser Doppler vibrometer.PZT ink is drop-cast on a flexible substrate in two electrode formats for evaluation: parallel-plate and interdigitated electrodes (IDEs). The parallel-plate electrode format is difficult to implement, because silver electrodes cannot be properly printed onto the PZT film with high conductivity and dimension accuracy. In contrast, IDEs inkjet-printed onto a polyethylene terephthalate (PET) film demonstrate excellent resolution and conductivity. Sinusoidal voltage applied over the IDEs drives PZT thin-film with IDEs device into resonance serving as a resonator.PZT thin films with printed IDEs are demonstrated as vibration and strain sensors. Vibration tests are carried out on wing and beam structures with small angle oscillations. PZT thin-film with IDEs are attached on one side of these test structures and commercially acquired foil strain gauges on the other side for comparison and characterization. Strain and charge frequency domain measurements are recorded and amplitude peaks correlate to structural vibration frequencies. PZT-IDE sensor outputs at wing/beam oscillation frequency are found to increase with vibration amplitude and charge responses are approximately proportional to strain gauge outputs. This validates PZT-silane thin films with printed IDEs as strain sensors. The directional dependence of their sensing capability is demonstrated in theory, finite element analysis and experimentation. Two PZT-silane thin film devices with printed IDEs oriented 90 degrees apart show different sensitivities towards single-axis strain and experimentation proves PZT thin films with IDEs can distinguish strains in two dimensions.
590 $a School code: 0250.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Materials science. $3 543314
650 4 $a Nanoscience. $3 587832
653 $a Inkject printed interdigitated electrodes
653 $a Nano- composite sensor and actuator
653 $a Printed PZT thin film
653 $a PZT nanoparticles
653 $a PZT-silane ink
653 $a Structural health monitoring (SHM) of composite structures
690 $a 0548
690 $a 0565
690 $a 0794
710 2 $a University of Washington. $b Mechanical Engineering. $3 2092993
773 0 $t Dissertations Abstracts International $g 81-03B.
790 $a 0250
791 $a Ph.D.
792 $a 2019
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=13900553