東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Fabrication and Characterization of ...

Ordu, Mustafa.

Linked to FindBook

Google Book

Amazon

博客來

Fabrication and Characterization of Semiconductor Core Optical Fibers for Mid-Infrared Transmission.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Fabrication and Characterization of Semiconductor Core Optical Fibers for Mid-Infrared Transmission./
Author:	Ordu, Mustafa.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2018,
Description:	124 p.
Notes:	Source: Dissertation Abstracts International, Volume: 79-08(E), Section: B.
Contained By:	Dissertation Abstracts International79-08B(E).
Subject:	Mechanical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10639513
ISBN:	9780355743500

Fabrication and Characterization of Semiconductor Core Optical Fibers for Mid-Infrared Transmission.
Ordu, Mustafa.

Fabrication and Characterization of Semiconductor Core Optical Fibers for Mid-Infrared Transmission. - Ann Arbor : ProQuest Dissertations & Theses, 2018 - 124 p.

Source: Dissertation Abstracts International, Volume: 79-08(E), Section: B.

Thesis (Ph.D.)--Boston University, 2018.

Transmission in the mid-infrared (2--15 microm) spectrum has many applications, including biomedical surgery, chemical detection, and countermeasures in defense systems, among others. This highlights the necessity of a suitable fiber for the mid-infrared (mid-IR) spectral range. Although fluoride and chalcogenide glasses have shown promise of relatively low transmission losses, they are prone to devitrification at room temperature leading to performance degradation. Semiconductors, such as germanium and silicon have low theoretical losses in the mid-IR spectral range, and are stable at room temperature, making semiconductor-core fibers worthy of exploration for mid-IR transmission.

ISBN: 9780355743500Subjects--Topical Terms:

649730
Mechanical engineering.

Fabrication and Characterization of Semiconductor Core Optical Fibers for Mid-Infrared Transmission.
LDR:04684nmm a2200325 4500 001 2160481
005 20180727091503.5
008 190424s2018 ||||||||||||||||| ||eng d
020 $a 9780355743500
035 $a (MiAaPQ)AAI10639513
035 $a (MiAaPQ)bu:13419
035 $a AAI10639513
040 $a MiAaPQ $c MiAaPQ
100 1 $a Ordu, Mustafa. $3 3348403
245 1 0 $a Fabrication and Characterization of Semiconductor Core Optical Fibers for Mid-Infrared Transmission.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2018
300 $a 124 p.
500 $a Source: Dissertation Abstracts International, Volume: 79-08(E), Section: B.
500 $a Adviser: Soumendra N. Basu.
502 $a Thesis (Ph.D.)--Boston University, 2018.
520 $a Transmission in the mid-infrared (2--15 microm) spectrum has many applications, including biomedical surgery, chemical detection, and countermeasures in defense systems, among others. This highlights the necessity of a suitable fiber for the mid-infrared (mid-IR) spectral range. Although fluoride and chalcogenide glasses have shown promise of relatively low transmission losses, they are prone to devitrification at room temperature leading to performance degradation. Semiconductors, such as germanium and silicon have low theoretical losses in the mid-IR spectral range, and are stable at room temperature, making semiconductor-core fibers worthy of exploration for mid-IR transmission.
520 $a In this study, germanium (Ge)-core, borosilicate glass-cladded; silicon (Si)-core, silica-cladded; and Si-Ge alloy-core silica-cladded fibers were drawn in laboratory-made mini draw towers using the rod-in-tube method at a relatively low temperature of 1000 °C for borosilicate glass drawing and 1760 °C for silica drawing. 3 mm outer diameter core-drilled germanium and silicon rods were placed in borosilicate and silica glass tubes as preforms for the germanium-core and silicon-core fibers, respectively. 1.9 mm outer diameter core drilled germanium rods and 2 mm inner diameter, 3 mm outer diameter core drilled silicon tubes were placed concentrically in silica tubes as preforms of silicon-germanium alloy fibers. The core/cladding area ratio was controlled by adding concentric borosilicate/silica tubes to increase the preform diameter. Depending on the drawing speed and initial core/cladding diameter ratio, fibers with core diameters of 10--200 microm with cladding diameters of 130--500 microm, as well as canes with core diameters of 300--350 microm and cladding diameters of 1.3--1.4 mm were drawn.
520 $a The drawn fibers were characterized by scanning/transmission electron microscopy (S/TEM), energy dispersive x-ray spectroscopy (EDX), x-ray diffraction (XRD) and electron backscatter diffraction (EBSD). It was found that there was minimal diffusion of oxygen and silicon from the cladding to the core in the Ge-core fibers. In the Si-core and Si-Ge alloy-core fibers, around 3 at % oxygen were found in the core, presumably due to enhanced diffusion at the higher drawing temperature of the silica-clad fibers. Optical characterization of the Ge canes, carried out using Fourier transform infrared spectroscopy (FTIR) in the 1.3--16 microm wavelength range, showed similar transmission characteristics, albeit with increased losses, over the entire wavelength range as the core drilled unprocessed germanium rod, even though the germanium core had undergone melting and re-solidification during the fabrication process. The transmission losses in the fibers were measured using two quantum cascade lasers, and were found to average 5.1 dB/cm for Ge-core fibers and 18.3 dB/cm for Si-core fibers in the 5.8--6.2 microm range. Transmission loss of Si-Ge alloy fibers was found to be 75 dB/cm at 6.1 microm. The higher losses of Si-Ge fibers can be attributed to compositional fluctuation in the core, due to the rapid cooling rate during fiber drawing. High temperature annealing of the fibers following by slow cooling homogenized the fiber core, and reduced the transmission losses to 28 dB/cm, but also introduced cracks. Non-linear properties of Ge-core fibers and canes were investigated using femtosecond pump-probe spectroscopy. Unprocessed 3 mm diameter rods exhibited the same detuning oscillations as 770 and 358 microm Ge-core canes and a 132 microm Ge-core fiber, indicating that the non-liner properties of the semiconductor cores were preserved during processing.
590 $a School code: 0017.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Optics. $3 517925
690 $a 0548
690 $a 0752
710 2 $a Boston University. $b Mechanical Engineering. $3 3181610
773 0 $t Dissertation Abstracts International $g 79-08B(E).
790 $a 0017
791 $a Ph.D.
792 $a 2018
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10639513