東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Heat Transfer Analysis in a Paddle R...

Ullal, Ankith.

FindBook

Google Book

Amazon

博客來

Heat Transfer Analysis in a Paddle Reactor for Biomass Fast Pyrolyis.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Heat Transfer Analysis in a Paddle Reactor for Biomass Fast Pyrolyis./
作者:	Ullal, Ankith.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
面頁冊數:	56 p.
附註:	Source: Masters Abstracts International, Volume: 56-04.
Contained By:	Masters Abstracts International56-04(E).
標題:	Mechanical engineering. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10266966
ISBN:	9781369822274

Heat Transfer Analysis in a Paddle Reactor for Biomass Fast Pyrolyis.
Ullal, Ankith.

Heat Transfer Analysis in a Paddle Reactor for Biomass Fast Pyrolyis. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 56 p.

Source: Masters Abstracts International, Volume: 56-04.

Thesis (M.S.)--Michigan Technological University, 2017.

Heat transfer analysis was performed on a novel auger reactor for biomass fast pyrolysis. As part of this analysis, correlations for specific heat capacity and heat transfer coefficients for biomass (sawdust) and sand (used as heat transfer medium) were developed. For sand, the heat transfer coefficient followed a power law distribution with reactor fill level and temperature. For raw biomass, the heat transfer coefficient also showed similar dependence on fill level, but was independent of temperature up to 300°C. These correlations were used in a one dimensional heat transfer model developed to calculate the heating time and heating rate of biomass in the presence of a heat transfer medium (HTM). A heating time of 3 seconds was obtained to raise the temperature of biomass from 298 K to 753 K. Instantaneous heating rates up to 530 K/s were obtained, thus ensuring fast pyrolysis. Further, to study the effect of heating rates on liquid product yields, a previously validated torrefaction-pyrolysis model was used to calculate the liquid yields for torrefied pine forest residues at various heating rates. A threshold heating rate value of 12 K/s was obtained from the model, above which the final product distribution was not affected. The model predicted liquid yield was 54%, in comparison to the experimental yield of 53%, for torrefied pine forest residues without HTM. The steady state experimental heating rate of 36 K/s was observed, which was above the 12 K/s threshold value thus ensuring fast pyrolysis. The results obtained in this paper will be used as a basis for scaling up the reactor configuration to carry out fast pyrolysis without HTM.

ISBN: 9781369822274Subjects--Topical Terms:

649730
Mechanical engineering.

Heat Transfer Analysis in a Paddle Reactor for Biomass Fast Pyrolyis.
LDR:02570nmm a2200289 4500 001 2153517
005 20171130090822.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9781369822274
035 $a (MiAaPQ)AAI10266966
035 $a AAI10266966
040 $a MiAaPQ $c MiAaPQ
100 1 $a Ullal, Ankith. $3 3341244
245 1 0 $a Heat Transfer Analysis in a Paddle Reactor for Biomass Fast Pyrolyis.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 56 p.
500 $a Source: Masters Abstracts International, Volume: 56-04.
500 $a Advisers: Ezra Bar-Ziv; Jordan Klinger.
502 $a Thesis (M.S.)--Michigan Technological University, 2017.
520 $a Heat transfer analysis was performed on a novel auger reactor for biomass fast pyrolysis. As part of this analysis, correlations for specific heat capacity and heat transfer coefficients for biomass (sawdust) and sand (used as heat transfer medium) were developed. For sand, the heat transfer coefficient followed a power law distribution with reactor fill level and temperature. For raw biomass, the heat transfer coefficient also showed similar dependence on fill level, but was independent of temperature up to 300°C. These correlations were used in a one dimensional heat transfer model developed to calculate the heating time and heating rate of biomass in the presence of a heat transfer medium (HTM). A heating time of 3 seconds was obtained to raise the temperature of biomass from 298 K to 753 K. Instantaneous heating rates up to 530 K/s were obtained, thus ensuring fast pyrolysis. Further, to study the effect of heating rates on liquid product yields, a previously validated torrefaction-pyrolysis model was used to calculate the liquid yields for torrefied pine forest residues at various heating rates. A threshold heating rate value of 12 K/s was obtained from the model, above which the final product distribution was not affected. The model predicted liquid yield was 54%, in comparison to the experimental yield of 53%, for torrefied pine forest residues without HTM. The steady state experimental heating rate of 36 K/s was observed, which was above the 12 K/s threshold value thus ensuring fast pyrolysis. The results obtained in this paper will be used as a basis for scaling up the reactor configuration to carry out fast pyrolysis without HTM.
590 $a School code: 0129.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Alternative Energy. $3 1035473
690 $a 0548
690 $a 0363
710 2 $a Michigan Technological University. $b Mechanical Engineering. $3 3341245
773 0 $t Masters Abstracts International $g 56-04(E).
790 $a 0129
791 $a M.S.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10266966