東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Development and enhancement of web-b...

Park, Youn Shik.

Linked to FindBook

Google Book

Amazon

博客來

Development and enhancement of web-based tools to develop Total Maximum Daily Load.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Development and enhancement of web-based tools to develop Total Maximum Daily Load./
Author:	Park, Youn Shik.
Description:	180 p.
Notes:	Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
Contained By:	Dissertation Abstracts International76-02B(E).
Subject:	Agricultural engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636487
ISBN:	9781321181296

Development and enhancement of web-based tools to develop Total Maximum Daily Load.
Park, Youn Shik.

Development and enhancement of web-based tools to develop Total Maximum Daily Load. - 180 p.

Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.

Thesis (Ph.D.)--Purdue University, 2014.

Flow and load duration curves (FDCs and LDCs) are commonly used to develop total maximum daily loads (TMDLs). A web-based tool was previously developed to facilitate development of FDC and LDC, allowing use of USGS streamflow data via web access. In the research reported here, the tool has been upgraded to retrieve water quality data from STORET/WQX and USGS, because significant effort is often required to obtain water quality data, and additional tools were developed to assist in decision making for best management practices (BMPs) selection.

ISBN: 9781321181296Subjects--Topical Terms:

3168406
Agricultural engineering.

Development and enhancement of web-based tools to develop Total Maximum Daily Load.
LDR:03595nmm a2200325 4500 001 2066181
005 20151217135748.5
008 170521s2014 ||||||||||||||||| ||eng d
020 $a 9781321181296
035 $a (MiAaPQ)AAI3636487
035 $a AAI3636487
040 $a MiAaPQ $c MiAaPQ
100 1 $a Park, Youn Shik. $3 3180950
245 1 0 $a Development and enhancement of web-based tools to develop Total Maximum Daily Load.
300 $a 180 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
500 $a Adviser: Bernard A. Engel.
502 $a Thesis (Ph.D.)--Purdue University, 2014.
520 $a Flow and load duration curves (FDCs and LDCs) are commonly used to develop total maximum daily loads (TMDLs). A web-based tool was previously developed to facilitate development of FDC and LDC, allowing use of USGS streamflow data via web access. In the research reported here, the tool has been upgraded to retrieve water quality data from STORET/WQX and USGS, because significant effort is often required to obtain water quality data, and additional tools were developed to assist in decision making for best management practices (BMPs) selection.
520 $a The Web-based LDC Tool employs LOADEST and LOADIN to estimate daily pollutant loads using intermittent water quality data; therefore, LOADEST and LOADIN were evaluated for annual pollutant load estimations. Daily nitrogen, phosphorus, and sediment concentration data were collected and subsampled using six sampling strategies. Since the water quality parameters showed different relationships with streamflow for each sampling strategy, it was concluded that pollutant regression models need to be selected based on water quality parameters. In addition, water quality data used to estimate annual pollutant loads need to include an appropriate proportion of water quality data from storm events, with 20-30% of water quality data from high-flow (i.e. the upper 10 percent of flows for a given analysis period) providing the closest estimated sediment and phosphorus loads to measured loads.
520 $a After the Web-based LDC Tool identifies pollutant loads exceeding standards and computes the required pollutant reduction to meet standard loads, a model capable of simulating BMPs was required. The Spreadsheet Tool for the Estimation of Pollutant Load (STEPL), a spreadsheet model to estimate annual pollutant loads, was evaluated as the basis for the BMP model. STEPL computes annual direct runoff using the Soil Conservation Service Curve Number (SCS-CN) method with average rainfall per event. Annual direct runoff using the EPA STEPL approach showed large differences compared to the annual direct runoff computed by general use of SCS-CN method. However, annual direct runoff computed from daily precipitation data generated from CLIGEN showed smaller differences than values computed from EPA STEPL approaches. Therefore, a web-based model to simulate BMPs, STEPL WEB, was developed to compute annual direct runoff obtained using daily precipitation data generated by CLIGEN. STEPL WEB establishes a priority list of BMPs based on implementation cost per mass of pollutant reduction, and then the model performs iterative simulations to identify the most cost-effective BMP implementation plans.
590 $a School code: 0183.
650 4 $a Agricultural engineering. $3 3168406
650 4 $a Environmental engineering. $3 548583
650 4 $a Web studies. $3 2122754
650 4 $a Computer science. $3 523869
690 $a 0539
690 $a 0775
690 $a 0646
690 $a 0984
710 2 $a Purdue University. $b Agricultural and Biological Engineering. $3 1025335
773 0 $t Dissertation Abstracts International $g 76-02B(E).
790 $a 0183
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636487