東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Measurement of aeroacoustic noise ge...

Asheim, Michael J.

Linked to FindBook

Google Book

Amazon

博客來

Measurement of aeroacoustic noise generated on wind turbine blades modified by trailing edge brushes.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Measurement of aeroacoustic noise generated on wind turbine blades modified by trailing edge brushes./
Author:	Asheim, Michael J.
Description:	112 p.
Notes:	Source: Dissertation Abstracts International, Volume: 75-09(E), Section: B.
Contained By:	Dissertation Abstracts International75-09B(E).
Subject:	Acoustics. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3622898
ISBN:	9781303950186

Measurement of aeroacoustic noise generated on wind turbine blades modified by trailing edge brushes.
Asheim, Michael J.

Measurement of aeroacoustic noise generated on wind turbine blades modified by trailing edge brushes. - 112 p.

Source: Dissertation Abstracts International, Volume: 75-09(E), Section: B.

Thesis (Ph.D.)--Colorado School of Mines, 2014.

This item must not be sold to any third party vendors.

As wind technology becomes a larger portion of the energy production picture, the problematic interactions between the machines and society will continue to become more pronounced. Of these problems, wind turbine noise is one of the most important to the future of wind turbine development. This study looks at the effect trailing edge brushes mounted on the 2 bladed Controls Advance Research Turbine (CART 2), located at the National Wind Technology Center, have on the overall acoustic and aerodynamic performance of the blades. The use of trailing edge brushes reduced the aeroacoustic noise by 1.0 to 5.0 dB over the baseline blade, depending on wind speed. This acoustic performance comes at a cost to the aerodynamic performance of the blades. The aerodynamic performance indicators, such as turbine power and root bending moments show that increased drag due to the brushes is the main contributor to the reduction in power production. An economic analysis also investigated how to best use noise mitigation devices to optimize acoustic, power performance and loads of a 600 kW baseline turbine, such as the CART 2. The analysis shows that the use of up a noise mitigation device of 4 dB is best used by increasing the rotor diameter and the power rating of the machine, from a 43.3 m diameter, 600 kW machine to a 68.8 m diameter, 886.7 kW machine. This increase resulted in an annual energy production increase of 414% when using a Rayleigh wind distribution with at a mean annual wind speed of 8.5 m/s. This is a reduction of cost of energy from $0.0463 per kWh to $0.0422 kWh. This reduction in energy production costs helps to explain the continuing trend of turbine machine growth in both rotor diameter and power rating.

ISBN: 9781303950186Subjects--Topical Terms:

879105
Acoustics.

Measurement of aeroacoustic noise generated on wind turbine blades modified by trailing edge brushes.
LDR:02762nmm a2200313 4500 001 2061779
005 20151020075128.5
008 170521s2014 eng d
020 $a 9781303950186
035 $a (MiAaPQ)AAI3622898
035 $a AAI3622898
040 $a MiAaPQ $c MiAaPQ
100 1 $a Asheim, Michael J. $3 3176090
245 1 0 $a Measurement of aeroacoustic noise generated on wind turbine blades modified by trailing edge brushes.
300 $a 112 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-09(E), Section: B.
500 $a Advisers: Catherine Skokan; David Munoz.
502 $a Thesis (Ph.D.)--Colorado School of Mines, 2014.
506 $a This item must not be sold to any third party vendors.
520 $a As wind technology becomes a larger portion of the energy production picture, the problematic interactions between the machines and society will continue to become more pronounced. Of these problems, wind turbine noise is one of the most important to the future of wind turbine development. This study looks at the effect trailing edge brushes mounted on the 2 bladed Controls Advance Research Turbine (CART 2), located at the National Wind Technology Center, have on the overall acoustic and aerodynamic performance of the blades. The use of trailing edge brushes reduced the aeroacoustic noise by 1.0 to 5.0 dB over the baseline blade, depending on wind speed. This acoustic performance comes at a cost to the aerodynamic performance of the blades. The aerodynamic performance indicators, such as turbine power and root bending moments show that increased drag due to the brushes is the main contributor to the reduction in power production. An economic analysis also investigated how to best use noise mitigation devices to optimize acoustic, power performance and loads of a 600 kW baseline turbine, such as the CART 2. The analysis shows that the use of up a noise mitigation device of 4 dB is best used by increasing the rotor diameter and the power rating of the machine, from a 43.3 m diameter, 600 kW machine to a 68.8 m diameter, 886.7 kW machine. This increase resulted in an annual energy production increase of 414% when using a Rayleigh wind distribution with at a mean annual wind speed of 8.5 m/s. This is a reduction of cost of energy from $0.0463 per kWh to $0.0422 kWh. This reduction in energy production costs helps to explain the continuing trend of turbine machine growth in both rotor diameter and power rating.
590 $a School code: 0052.
650 4 $a Acoustics. $3 879105
650 4 $a Alternative Energy. $3 1035473
650 4 $a Mechanical engineering. $3 649730
650 4 $a Environmental economics. $3 535179
690 $a 0986
690 $a 0363
690 $a 0548
690 $a 0438
710 2 0 $a Colorado School of Mines. $b Mechanical Engineering. $3 2092097
773 0 $t Dissertation Abstracts International $g 75-09B(E).
790 $a 0052
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3622898