東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Miniature Printed Antennas and Filte...

Gupta, Saurabh.

Linked to FindBook

Google Book

Amazon

博客來

Miniature Printed Antennas and Filters Using Volumetric Reactive Pins and Lumped Circuit Loadings.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Miniature Printed Antennas and Filters Using Volumetric Reactive Pins and Lumped Circuit Loadings./
Author:	Gupta, Saurabh.
Description:	85 p.
Notes:	Source: Dissertation Abstracts International, Volume: 76-04(E), Section: B.
Contained By:	Dissertation Abstracts International76-04B(E).
Subject:	Electrical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3665852
ISBN:	9781321387025

Miniature Printed Antennas and Filters Using Volumetric Reactive Pins and Lumped Circuit Loadings.
Gupta, Saurabh.

Miniature Printed Antennas and Filters Using Volumetric Reactive Pins and Lumped Circuit Loadings. - 85 p.

Source: Dissertation Abstracts International, Volume: 76-04(E), Section: B.

Thesis (Ph.D.)--University of South Florida, 2014.

This item must not be sold to any third party vendors.

This dissertation presents a new technique for miniaturization of printed RF circuits and antennas. The technique is based on lumped circuit elements and volumetric reactive pin loadings. The vertical arrangement of the pins is shown to provide a meandered current path within the device volume enhancing the miniaturization achieved with sole application of lumped circuit components. The technique is applied for antenna and filter size reduction. In antenna applications, it is shown that due to the presence of the reactive pin loading the overall size of a printed antenna can be miniaturized without affecting the radiation efficiency performance. One of the major advantages of this approach over the existing miniaturization techniques is that it allows reducing the overall size of the antenna (i.e. the substrate size) in addition to its metallization footprint area. Specifically, three antenna designs are presented for GPS and ISM applications. Firstly, a miniaturized wide-band CDL antenna has been introduced. The antenna consists of two loops which are loaded with lumped inductors and coupling capacitors. The design is shown to exhibits 49% smaller footprint size as compared to a traditional patch antenna without degrading the bandwidth performance. Secondly, a circular polarized compact dual-band CDL GPS antenna loaded with lumped capacitors and vertical pins is shown. The antenna operates with >50% lesser area as compared to a traditional L2 patch antenna without degrading its radiation performance. Thirdly, a patch antenna with its cavity loaded with CSRRs is presented. The novelty of the design is that it provides circularly symmetric arrangement of CSRRs thereby enabling the antenna to exhibit circular polarization (CP). Apart from CSRR, further size reduction is obtained by simultaneously reducing the substrate size and ground plane metallization around the CSRRs and loading it with pins. The antenna is 44% smaller than a traditional patch antenna without causing degradation in the antenna's radiation efficiency performance. To extend the volumetric loading to filter applications, the last chapter of the dissertation presents a detailed analysis to understand how geometrical factors (e.g. periodicity, radius, width of the host transmission line, etc) affect the miniaturization performance and quality factor. As a design example, a 2GHz pin loaded hairline filter with 17% -3dB |S21| bandwidth and 1.5dB insertion loss is demonstrated. The footprint size of the filter is ~lambda0/16xlambda0/9 2GHz and is 45% smaller than its traditional counterpart.

ISBN: 9781321387025Subjects--Topical Terms:

649834
Electrical engineering.

Miniature Printed Antennas and Filters Using Volumetric Reactive Pins and Lumped Circuit Loadings.
LDR:03546nmm a2200277 4500 001 2059536
005 20150805065230.5
008 170521s2014 ||||||||||||||||| ||eng d
020 $a 9781321387025
035 $a (MiAaPQ)AAI3665852
035 $a AAI3665852
040 $a MiAaPQ $c MiAaPQ
100 1 $a Gupta, Saurabh. $3 1058664
245 1 0 $a Miniature Printed Antennas and Filters Using Volumetric Reactive Pins and Lumped Circuit Loadings.
300 $a 85 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-04(E), Section: B.
500 $a Adviser: Gokhan Mumcu.
502 $a Thesis (Ph.D.)--University of South Florida, 2014.
506 $a This item must not be sold to any third party vendors.
520 $a This dissertation presents a new technique for miniaturization of printed RF circuits and antennas. The technique is based on lumped circuit elements and volumetric reactive pin loadings. The vertical arrangement of the pins is shown to provide a meandered current path within the device volume enhancing the miniaturization achieved with sole application of lumped circuit components. The technique is applied for antenna and filter size reduction. In antenna applications, it is shown that due to the presence of the reactive pin loading the overall size of a printed antenna can be miniaturized without affecting the radiation efficiency performance. One of the major advantages of this approach over the existing miniaturization techniques is that it allows reducing the overall size of the antenna (i.e. the substrate size) in addition to its metallization footprint area. Specifically, three antenna designs are presented for GPS and ISM applications. Firstly, a miniaturized wide-band CDL antenna has been introduced. The antenna consists of two loops which are loaded with lumped inductors and coupling capacitors. The design is shown to exhibits 49% smaller footprint size as compared to a traditional patch antenna without degrading the bandwidth performance. Secondly, a circular polarized compact dual-band CDL GPS antenna loaded with lumped capacitors and vertical pins is shown. The antenna operates with >50% lesser area as compared to a traditional L2 patch antenna without degrading its radiation performance. Thirdly, a patch antenna with its cavity loaded with CSRRs is presented. The novelty of the design is that it provides circularly symmetric arrangement of CSRRs thereby enabling the antenna to exhibit circular polarization (CP). Apart from CSRR, further size reduction is obtained by simultaneously reducing the substrate size and ground plane metallization around the CSRRs and loading it with pins. The antenna is 44% smaller than a traditional patch antenna without causing degradation in the antenna's radiation efficiency performance. To extend the volumetric loading to filter applications, the last chapter of the dissertation presents a detailed analysis to understand how geometrical factors (e.g. periodicity, radius, width of the host transmission line, etc) affect the miniaturization performance and quality factor. As a design example, a 2GHz pin loaded hairline filter with 17% -3dB |S21| bandwidth and 1.5dB insertion loss is demonstrated. The footprint size of the filter is ~lambda0/16xlambda0/9 2GHz and is 45% smaller than its traditional counterpart.
590 $a School code: 0206.
650 4 $a Electrical engineering. $3 649834
690 $a 0544
710 2 $a University of South Florida. $b Electrical Engineering. $3 1678952
773 0 $t Dissertation Abstracts International $g 76-04B(E).
790 $a 0206
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3665852