東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Combustion visualization and particu...

Lee, Po-I.

Linked to FindBook

Google Book

Amazon

博客來

Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85./
Author:	Lee, Po-I.
Description:	253 p.
Notes:	Source: Dissertation Abstracts International, Volume: 75-08(E), Section: B.
Contained By:	Dissertation Abstracts International75-08B(E).
Subject:	Engineering, Automotive. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3616693
ISBN:	9781303835933

Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85.
Lee, Po-I.

Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85. - 253 p.

Source: Dissertation Abstracts International, Volume: 75-08(E), Section: B.

Thesis (Ph.D.)--Wayne State University, 2014.

In order to increase engine efficiency as well as to reduce emission, optimizing combustion is always the challenge in research and product development. Gasoline direct injection (GDI) engines have been popularized due to its higher power density, fuel efficiency, and the possibility for advanced engine technologies over conventional port-fuel-injection (PFI) gasoline engines. However, many issues are heavily investigated, such as air-fuel mixing preparation, fuel wall-wetting, higher HC and PM emissions, catalytic convertor efficiency, knocking, and pre-ignition. Besides, advanced technologies represent higher production cost.

ISBN: 9781303835933Subjects--Topical Terms:

1018477
Engineering, Automotive.

Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85.
LDR:03677nam a2200313 4500 001 1969200
005 20141222143621.5
008 150210s2014 ||||||||||||||||| ||eng d
020 $a 9781303835933
035 $a (MiAaPQ)AAI3616693
035 $a AAI3616693
040 $a MiAaPQ $c MiAaPQ
100 1 $a Lee, Po-I. $3 2106481
245 1 0 $a Combustion visualization and particulate matter emission of a GDI engine by using gasoline and E85.
300 $a 253 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-08(E), Section: B.
500 $a Adviser: Ming-Chia Lai.
502 $a Thesis (Ph.D.)--Wayne State University, 2014.
520 $a In order to increase engine efficiency as well as to reduce emission, optimizing combustion is always the challenge in research and product development. Gasoline direct injection (GDI) engines have been popularized due to its higher power density, fuel efficiency, and the possibility for advanced engine technologies over conventional port-fuel-injection (PFI) gasoline engines. However, many issues are heavily investigated, such as air-fuel mixing preparation, fuel wall-wetting, higher HC and PM emissions, catalytic convertor efficiency, knocking, and pre-ignition. Besides, advanced technologies represent higher production cost.
520 $a Because of the limited resource of petroleum-based fuels, ethanol is deemed as the alternative fuel for gasoline due to its availability, renewability, and fuel properties. It is also known for its lower energy content (LHV ~ 27 MJ/kg) that the fuel economy would decrease if such a fuel is used. Besides that, lower HC, CO, NOX, and PM emissions may be achieved with the presence of ethanol in fuel.
520 $a The present study is focused on visualizing GDI combustion with different fuels (E0 and E85) along with engine-out emission measurement specially focusing on PM emission. Different engine operation conditions are taken into consideration to study the effects on engine performance in terms of engine start-up, combustion quality and variation, and engine-out emission. High speed imaging techniques are used for visualizing the combustion process, and high speed emission measurement devices are used for engine-out emission study. PM emission is the primary focus in the current study on emissions with the assistance of in-cylinder visualization to identify the location of diffusion flame where the soot is formed. CFD modeling is also implemented to analyze the air-fuel mixture preparation as well as the combustion process.
520 $a The results indicate that the combustion process may not be ideal under certain operating conditions. By various image processing techniques, it is found that the flame kernel development could be either too slow or too heterogeneous. Fuel wall impingement is also found that pool fire is in inevitable in some cases that HC, CO, and PM emissions are high. Injection timing, ignition timing, and air-fuel ratio are the three primary factors that need to be carefully controlled for engine calibration in order to achieve higher efficiency and lower emissions. Some advanced technologies, e.g. one-valve deactivation, may not be ideal at certain speed and load. The use of alternative fuel could reduce PM emission in mass, but the particle number could sometimes be higher than using E0. The CFD simulation also validates the similar results found from the experiments.
590 $a School code: 0254.
650 4 $a Engineering, Automotive. $3 1018477
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0540
690 $a 0548
710 2 $a Wayne State University. $b Mechanical Engineering. $3 1057463
773 0 $t Dissertation Abstracts International $g 75-08B(E).
790 $a 0254
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3616693