東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Analysis of the deformation behavior...

Li, Hongmei.

Linked to FindBook

Google Book

Amazon

博客來

Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys.

Record Type:	Language materials, printed : Monograph/item
Title/Author:	Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys./
Author:	Li, Hongmei.
Description:	332 p.
Notes:	Source: Dissertation Abstracts International, Volume: 75-02(E), Section: B.
Contained By:	Dissertation Abstracts International75-02B(E).
Subject:	Engineering, General. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3601298
ISBN:	9781303520785

Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys.
Li, Hongmei.

Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys. - 332 p.

Source: Dissertation Abstracts International, Volume: 75-02(E), Section: B.

Thesis (Ph.D.)--Michigan State University, 2013.

Due to their high specific strength, good corrosion resistance, and the ability to withstand high temperature, titanium (Ti) alloys are often employed in structural applications, such as the aerospace industry. The intrinsic deformation mechanisms of Ti alloys activated within the broad service conditions for targeted structural components have not been as well documented as those for cubic metals. A greater knowledge of the distribution of the active deformation mechanisms in Ti alloys would be useful for developing a robust crystal plasticity finite element (CPFE) model to simulate the damage nucleation process of polycrystalline Ti alloys, thereby advancing efforts to establish Ti alloys with enhanced mechanical performance.

ISBN: 9781303520785Subjects--Topical Terms:

1020744
Engineering, General.

Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys.
LDR:04690nam a2200325 4500 001 1958979
005 20140512081900.5
008 150210s2013 ||||||||||||||||| ||eng d
020 $a 9781303520785
035 $a (MiAaPQ)AAI3601298
035 $a AAI3601298
040 $a MiAaPQ $c MiAaPQ
100 1 $a Li, Hongmei. $3 1922018
245 1 0 $a Analysis of the deformation behavior of the hexagonal close-packed alpha phase in titanium and titanium alloys.
300 $a 332 p.
500 $a Source: Dissertation Abstracts International, Volume: 75-02(E), Section: B.
500 $a Adviser: Carl J. Boehlert.
502 $a Thesis (Ph.D.)--Michigan State University, 2013.
520 $a Due to their high specific strength, good corrosion resistance, and the ability to withstand high temperature, titanium (Ti) alloys are often employed in structural applications, such as the aerospace industry. The intrinsic deformation mechanisms of Ti alloys activated within the broad service conditions for targeted structural components have not been as well documented as those for cubic metals. A greater knowledge of the distribution of the active deformation mechanisms in Ti alloys would be useful for developing a robust crystal plasticity finite element (CPFE) model to simulate the damage nucleation process of polycrystalline Ti alloys, thereby advancing efforts to establish Ti alloys with enhanced mechanical performance.
520 $a In this dissertation, a systematic investigation of the deformation behavior was conducted on commercially pure (CP) Ti, and the Ti-5Al-2.5Sn (wt.%), Ti-3Al-2.5V (wt.%), and Ti-6Al- 4V (wt.%) alloys. Experiments were performed in tension and tensile-creep at 296K-763K using an in-situ scanning electron microscopy (SEM) testing method, which allows for the observation of the surface deformation evolution. A technique combining backscattered electron (BSE) and secondary electron (SE) imaging and electron backscattered diffraction (EBSD) was used to identify the distribution of the active deformation systems observed under various testing conditions.
520 $a The main findings of this work were that the distribution of the deformation modes varied as a function of the material composition, texture, and the testing condition (i.e. temperature and stress). For the lower Al-containing materials, prismatic slip dominated the tensile deformation. However, the basal slip activity increased with increased Al content in the alloys. For example for the Ti-5Al-2.5Sn and Ti-6Al-4V alloys, basal slip was almost as equally active as prismatic slip. In fact, for some testing conditions of these alloys, such as the 728K tension tests of Ti- 6Al-4V, basal slip was more active than prismatic slip. Basal slip activity was also enhanced by increasing temperature. The twinning behavior was also dependent on the Al content of the materials; less twinning occurred for the alloys containing more than 3wt.% Al. Moreover, increasing temperature usually resulted in a decreased twinning activity. Texture also influenced the distribution of the deformation modes by affecting the Schmid factors, which played an important role in the deformation behavior. Compared to the higher-stress tensile experiments, slip was observed to a significantly lesser extent during creep. Instead, grain boundary sliding (GBS) was dominant. In some cases, GBS eventually evolved into grain boundary cracks. For Ti-5Al-2.5Sn, the formation of grain boundary cracks was associated with grains which displayed hard orientations, where the c-axis was nearly perpendicular to the tensile direction.
520 $a A novel methodology for calculating the CRSS ratios of the different deformation modes was developed. The calculated CRSS ratios indicated that the CRSS ratios of a-phase Ti changed as a function of alloy composition and test temperature. The methodology developed provides a flexible manner to assess the CRSS ratios for a variety of deformation systems in polycrystalline microstructures, and it has the potential to be applied to a wide range of materials and crystal systems.
520 $a This work has established a thorough understanding of the deformation mechanisms of Ti and Ti alloys as a function of alloy composition and test temperature. The insights gained from these data have a broad impact on understanding the heterogeneous deformation processes in Ti and Ti alloys and also on development of CPFE modeling.
590 $a School code: 0128.
650 4 $a Engineering, General. $3 1020744
650 4 $a Engineering, Materials Science. $3 1017759
690 $a 0537
690 $a 0794
710 2 $a Michigan State University. $b Materials Science and Engineering - Doctor of Philosophy. $3 2094241
773 0 $t Dissertation Abstracts International $g 75-02B(E).
790 $a 0128
791 $a Ph.D.
792 $a 2013
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3601298