東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Failure mechanism of a brittle layer...

Wang, Rentong.

FindBook

Google Book

Amazon

博客來

Failure mechanism of a brittle layered material.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Failure mechanism of a brittle layered material./
作者:	Wang, Rentong.
面頁冊數:	150 p.
附註:	Source: Dissertation Abstracts International, Volume: 65-09, Section: B, page: 4655.
Contained By:	Dissertation Abstracts International65-09B.
標題:	Applied Mechanics. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3148411
ISBN:	0496066390

Failure mechanism of a brittle layered material.
Wang, Rentong.

Failure mechanism of a brittle layered material. - 150 p.

Source: Dissertation Abstracts International, Volume: 65-09, Section: B, page: 4655.

Thesis (Ph.D.)--The Ohio State University, 2004.

Layered structures have been widely used in industrial and military applications to protect substrates from environmental effects. The same strategy has been applied to medical implants and various dental restorations such as complete and partial veneering of teeth with ceramics to protect the remaining tooth structure. We experimentally and theoretically investigate the failure mechanisms of a simple brittle layered structure subjected to a static indentation load. For this problem, cracks were observed to initiate from either the top or the bottom surface of the top layer depending on the top layer thickness, the material properties of the layers, and the indenter size.

ISBN: 0496066390Subjects--Topical Terms:

1018410
Applied Mechanics.

Failure mechanism of a brittle layered material.
LDR:03131nmm 2200337 4500 001 1839944
005 20050714101055.5
008 130614s2004 eng d
020 $a 0496066390
035 $a (UnM)AAI3148411
035 $a AAI3148411
040 $a UnM $c UnM
100 1 $a Wang, Rentong. $3 1928303
245 1 0 $a Failure mechanism of a brittle layered material.
300 $a 150 p.
500 $a Source: Dissertation Abstracts International, Volume: 65-09, Section: B, page: 4655.
500 $a Adviser: Noriko Katsube.
502 $a Thesis (Ph.D.)--The Ohio State University, 2004.
520 $a Layered structures have been widely used in industrial and military applications to protect substrates from environmental effects. The same strategy has been applied to medical implants and various dental restorations such as complete and partial veneering of teeth with ceramics to protect the remaining tooth structure. We experimentally and theoretically investigate the failure mechanisms of a simple brittle layered structure subjected to a static indentation load. For this problem, cracks were observed to initiate from either the top or the bottom surface of the top layer depending on the top layer thickness, the material properties of the layers, and the indenter size.
520 $a In order to model the experimentally observed variation of critical indentation load, a statistical theory with flaw distribution in brittle specimens is employed. First, we examined an existing fracture mechanics based statistical theory. We pointed out the premature use of infinitesimally small volumetric element assumption in the theoretical derivation of the failure probability prediction formula and proposed an alternative form of prediction formula.
520 $a Second, using indentation tests on monolithic materials we test the hypothesis that the failure probability model developed by Fischer-Cripps and Collins (1994) can be used without introducing an empirically derived parameter and therefore can serve as a predictive tool for a cone crack imitation in a monolithic solid.
520 $a Third, the above methods are modified to a layered structure, and multi-axial stress states of indentation is taken into account in the failure probability analysis. Two modes of failures, a Hertzian cone crack initiating from the contacting surface and a half-penny-shaped crack initiating from the interface, are theoretically predicted and compared with experimental data.
520 $a Fourth, a finite half-penny-shaped crack perpendicular to the interfacial surface was introduced at the bottom surface of the top layer. The effect of interfacial debonding on the Stress Intensity Factor is examined.
520 $a The above study provides some insights into better designing and handling of the crown structures in the dental restoration applications.
590 $a School code: 0168.
650 4 $a Applied Mechanics. $3 1018410
650 4 $a Engineering, Mechanical. $3 783786
690 $a 0346
690 $a 0548
710 2 0 $a The Ohio State University. $3 718944
773 0 $t Dissertation Abstracts International $g 65-09B.
790 1 0 $a Katsube, Noriko, $e advisor
790 $a 0168
791 $a Ph.D.
792 $a 2004
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3148411