東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁

切換: 標籤 | MARC模式 | ISBD

Quantitative defect characterization...

Zhao, Xiaoliang.

FindBook

Google Book

Amazon

博客來

Quantitative defect characterization via guided waves.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Quantitative defect characterization via guided waves./
作者:	Zhao, Xiaoliang.
面頁冊數:	125 p.
附註:	Source: Dissertation Abstracts International, Volume: 64-11, Section: B, page: 5754.
Contained By:	Dissertation Abstracts International64-11B.
標題:	Engineering, Mechanical. -
電子資源:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3111210
ISBN:	0496587405

Quantitative defect characterization via guided waves.
Zhao, Xiaoliang.

Quantitative defect characterization via guided waves. - 125 p.

Source: Dissertation Abstracts International, Volume: 64-11, Section: B, page: 5754.

Thesis (Ph.D.)--The Pennsylvania State University, 2003.

Pipeline inspection systems are being developed to locate critical defects, and more recently to characterize and size them efficiently in order to prevent potential leakage or catastrophic failure, as well as to assist in the decision process of wait or replace. Ultrasonic guided waves have demonstrated their abilities and advantages of detecting a variety of defect types that occur in a plate or hollow cylindrical structure compared to other conventional methods. Yet defect classification and sizing in these structures by guided waves is still a major issue. In this work, the Boundary Element Method (BEM) combined with the guided wave normal mode expansion technique is used to study the interaction of various guided wave packets of energy with various crack and corrosion boundaries in a structure. Attempts are made to find the best modes and frequency with the best chance of success in carrying out the defect classification and sizing process.

ISBN: 0496587405Subjects--Topical Terms:

783786
Engineering, Mechanical.

Quantitative defect characterization via guided waves.
LDR:03840nmm 2200337 4500 001 1837534
005 20050506072710.5
008 130614s2003 eng d
020 $a 0496587405
035 $a (UnM)AAI3111210
035 $a AAI3111210
040 $a UnM $c UnM
100 1 $a Zhao, Xiaoliang. $3 1925979
245 1 0 $a Quantitative defect characterization via guided waves.
300 $a 125 p.
500 $a Source: Dissertation Abstracts International, Volume: 64-11, Section: B, page: 5754.
500 $a Adviser: Joseph L. Rose.
502 $a Thesis (Ph.D.)--The Pennsylvania State University, 2003.
520 $a Pipeline inspection systems are being developed to locate critical defects, and more recently to characterize and size them efficiently in order to prevent potential leakage or catastrophic failure, as well as to assist in the decision process of wait or replace. Ultrasonic guided waves have demonstrated their abilities and advantages of detecting a variety of defect types that occur in a plate or hollow cylindrical structure compared to other conventional methods. Yet defect classification and sizing in these structures by guided waves is still a major issue. In this work, the Boundary Element Method (BEM) combined with the guided wave normal mode expansion technique is used to study the interaction of various guided wave packets of energy with various crack and corrosion boundaries in a structure. Attempts are made to find the best modes and frequency with the best chance of success in carrying out the defect classification and sizing process.
520 $a To simplify the problem, a plate model is used to approximate the wall structure of a hollow cylinder of large diameter-to-wall-thickness ratio. The dispersion relation and wave structures of Shear Horizontal (SH) waves along the circumference of a hollow cylinder is derived and calculated. A parametric study with the hollow cylinder wall thickness to diameter ratio is conducted. Together with similar studies on circumferential Lamb waves in a pipe wall, a quantitative criterion as when a hollow cylinder wall can indeed be treated as a plate is given.
520 $a A two-dimensional boundary element method (BEM) FORTRAN code was developed for surface breaking defect characterization and sizing in a plate using guided waves. A new code is developed for internal inclusion types of defect that are considered benign to see whether they will give false alarms. Parametric studies on different incident wave modes and frequencies establish a guideline on how to characterize a defect in a two-dimensional wave guide.
520 $a In reality, all defects are three-dimensional, i.e. their length, width and depth are finite. A 3-D BEM code was developed to study the effects of defect length, width and depth on the propagation of guided waves. A circular disk region on a plate enclosing the 3-D defect was meshed with constant quadrilateral boundary elements. Outside the region, 3-D normal modes of both Lamb and SH waves were used to describe both the incident and scattered wave field. The wave scattering coefficients in different angle directions were obtained for defect characterization.
520 $a Finally, the design and manufacturing of a guided wave Electromagnetic Acoustic Transducer (EMAT) is discussed. 2-D and 3-D defect characterization in a plate via SH waves generated by EMATs and Lamb waves by piezoelectric transducers was conducted. Comparisons of experimental and BEM results were presented to describe quantitative NDE potential.
590 $a School code: 0176.
650 4 $a Engineering, Mechanical. $3 783786
650 4 $a Applied Mechanics. $3 1018410
650 4 $a Physics, Acoustics. $3 1019086
690 $a 0548
690 $a 0346
690 $a 0986
710 2 0 $a The Pennsylvania State University. $3 699896
773 0 $t Dissertation Abstracts International $g 64-11B.
790 1 0 $a Rose, Joseph L., $e advisor
790 $a 0176
791 $a Ph.D.
792 $a 2003
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3111210