東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back

Switch To: Labeled | MARC Mode | ISBD

Corrugated wood composite panels for...

Pang, Wei Chiang.

Linked to FindBook

Google Book

Amazon

博客來

Corrugated wood composite panels for structural decking.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Corrugated wood composite panels for structural decking./
Author:	Pang, Wei Chiang.
Description:	209 p.
Notes:	Source: Dissertation Abstracts International, Volume: 66-03, Section: B, page: 1609.
Contained By:	Dissertation Abstracts International66-03B.
Subject:	Engineering, Civil. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3167435
ISBN:	0542032430

Corrugated wood composite panels for structural decking.
Pang, Wei Chiang.

Corrugated wood composite panels for structural decking. - 209 p.

Source: Dissertation Abstracts International, Volume: 66-03, Section: B, page: 1609.

Thesis (Ph.D.)--Michigan Technological University, 2005.

High flexural strength and stiffness can be achieved by forming a thin panel into a wave shape perpendicular to the bending direction. The use of corrugated shapes to gain flexural strength and stiffness is common in metal and reinforced plastic products. However, there is no commercial production of corrugated wood composite panels. This research focuses on the application of corrugated shapes to wood strand composite panels. Beam theory, classical plate theory and finite element models were used to analyze the bending behavior of corrugated panels. The most promising shallow corrugated panel configuration was identified based on structural performance and compatibility with construction practices. The corrugation profile selected has a wavelength equal to 8&inches;, a channel depth equal to ¾&inches;, a sidewall angle equal to 45 degrees and a panel thickness equal to ¾&inches;.

ISBN: 0542032430Subjects--Topical Terms:

783781
Engineering, Civil.

Corrugated wood composite panels for structural decking.
LDR:03794nmm 2200301 4500 001 1815398
005 20060710075948.5
008 130610s2005 eng d
020 $a 0542032430
035 $a (UnM)AAI3167435
035 $a AAI3167435
040 $a UnM $c UnM
100 1 $a Pang, Wei Chiang. $3 1904826
245 1 0 $a Corrugated wood composite panels for structural decking.
300 $a 209 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-03, Section: B, page: 1609.
500 $a Adviser: L. Bogue Sandberg.
502 $a Thesis (Ph.D.)--Michigan Technological University, 2005.
520 $a High flexural strength and stiffness can be achieved by forming a thin panel into a wave shape perpendicular to the bending direction. The use of corrugated shapes to gain flexural strength and stiffness is common in metal and reinforced plastic products. However, there is no commercial production of corrugated wood composite panels. This research focuses on the application of corrugated shapes to wood strand composite panels. Beam theory, classical plate theory and finite element models were used to analyze the bending behavior of corrugated panels. The most promising shallow corrugated panel configuration was identified based on structural performance and compatibility with construction practices. The corrugation profile selected has a wavelength equal to 8&inches;, a channel depth equal to ¾&inches;, a sidewall angle equal to 45 degrees and a panel thickness equal to ¾&inches;.
520 $a 16&inches; x 16&inches; panels were produced using random mats and 3-layer aligned mats with surface flakes parallel to the channels. Strong axis and weak axis bending tests were conducted. The test results indicate that flake orientation has little effect on the strong axis bending stiffness. The &frac38;&inches; thick random mat corrugated panels exhibit bending stiffness (400,000 lbs-in 2/ft) and bending strength (3,000 in-lbs/ft) higher than 2332 &inches; or ¾&inches; thick APA Rated Sturd-I-Floor with a 24&inches; o.c. span rating. Shear and bearing test results show that the corrugated panel can withstand more than 50 psf of uniform load at 48&inches; joist spacings.
520 $a Molding trials on 16&inches; x 16&inches; panels provided data for full size panel production. Full size 4&feet; x 8&feet; shallow corrugated panels were produced with only minor changes to the current oriented strandboard manufacturing process. Panel testing was done to simulate floor loading during construction, without a top underlayment layer, and during occupancy, with an underlayment over the panel to form a composite deck. Flexural tests were performed in single-span and two-span bending with line loads applied at mid-span. The average strong axis bending stiffness and bending strength of the full size corrugated panels (without the underlayment) were over 400,000 lbs-in 2/ft and 3,000 in-lbs/ft, respectively. The composite deck system, which consisted of an OSB sheathing ( 1532 &inches; thick) nailed-glued (using 3d ringshank nails and AFG-01 subfloor adhesive) to the corrugated subfloor achieved about 60% of the full composite stiffness resulting in about 3 times the bending stiffness of the corrugated subfloor (1,250,000 lbs-in2/ft). Based on the LRFD design criteria, the corrugated composite floor system can carry 40 psf of unfactored uniform loads, limited by the L/480 deflection limit state, at 48&inches; joist spacings. (Abstract shortened by UMI.)
590 $a School code: 0129.
650 4 $a Engineering, Civil. $3 783781
650 4 $a Agriculture, Wood Technology. $3 1031154
690 $a 0543
690 $a 0746
710 2 0 $a Michigan Technological University. $3 1032921
773 0 $t Dissertation Abstracts International $g 66-03B.
790 1 0 $a Sandberg, L. Bogue, $e advisor
790 $a 0129
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3167435