東華大學圖書館 |

Soft Tactile Sensors for Mechanical Imaging.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Soft Tactile Sensors for Mechanical Imaging./
作者:	Li, Bin.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2016,
面頁冊數:	216 p.
附註:	Source: Dissertations Abstracts International, Volume: 78-08, Section: B.
Contained By:	Dissertations Abstracts International78-08B.
標題:	Biomedical engineering. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10246549
ISBN:	9781369427431

Soft Tactile Sensors for Mechanical Imaging.
Li, Bin.

Soft Tactile Sensors for Mechanical Imaging. - Ann Arbor : ProQuest Dissertations & Theses, 2016 - 216 p.

Source: Dissertations Abstracts International, Volume: 78-08, Section: B.

Thesis (Ph.D.)--Drexel University, 2016.

Tactile sensing aims to electronically capture physical attributes of an object via mechanical contact. It proves indispensable to many engineering tasks and systems, in areas ranging from manufacturing to medicine and autonomous robotics. Biological skin, which is highly compliant, is able to perform sensing under challenging and highly variable conditions with levels of performance that far exceed what is possible with conventional tactile sensors, which are normally fabricated with non-conforming materials. The development of stretchable, skin-like tactile sensors has, as a result, remained a longstanding goal of engineering. However, to date, artificial tactile sensors that might mimic both the mechanical and multimodal tactile sensory capabilities of biological skin remain far from realization, due to the challenges of fabricating spatially dense, mechanically robust, and compliant sensors in elastic media. Inspired by these demands, this dissertation addresses many aspects of the challenging problem of engineering skin-like electronic sensors. In the first part of the thesis, new methods for the design and fabrication of thin, highly deformable, high resolution tactile sensors are presented. The approach is based on a novel configuration of arrays of microfluidic channels embedded in thin elastomer membranes. To form electrodes, these channels are filled with a metal alloy, eutectic Gallium Indium, that remains liquid at room temperature. Using capacitance sensing techniques, this approach achieves sensing resolutions of 1 mm-1. To fabricate these devices, an efficient and robust soft lithography method is introduced, based on a single step cast. An analytical model for the performance of these devices is derived from electrostatic theory and continuum mechanics, and is demonstrated to yield excellent agreement with measured performance. This part of the investigation identified fundamental limitations, in the form of nonmonotonic behavior at low strains, that is demonstrated to generically affect solid cast soft capacitive sensors. The next part of the thesis is an investigation of new methods for designing soft tactile sensors based on multi-layer heterogeneous 3D structures that combine active layers, containing embedded liquid metal electrodes, with passive and mechanically tunable layers, containing air cavities and micropillar geometric supports. In tandem with analytical and computational modeling, these methods are demonstrated to facilitate greater control over mechanical and electronic performance. A new soft lithography fabrication method is also presented, based on the casting, alignment, and fusion of multiple functional layers in a soft polymer substrate. Measurements indicate that the resulting devices achieve excellent performance specifications, and avoid the limiting nonmonotonic behavior identified in the first part of the thesis. In order to demonstrate the practical utility of the devices, we used them to perform dynamic two-dimensional tactile imaging under distributed indentation loads. The results reflect the excellent static and dynamic performance of these devices. The final part of the thesis investigates the utility of the tactile sensing methods pursued here for imaging lumps embedded in simulated tissue. In order to facilitate real-time sensing, an electronic system for fast, array based measurement of small, sub-picofarad (pF) capacitance levels was developed. Using this system, we demonstrated that it is possible to accurately capture strain images depicting small lumps embedded in simulated tissue with either an electronic imaging system or a sensor worn on the finger, supporting the viability of wearable sensors for tactile imaging in medicine. In conclusion, this dissertation confronts many of the most vexing problems arising in the pursuit of skin-like electronic sensors, including fundamental operating principles, structural and functional electronic design, mechanical and electronic modeling, fabrication, and applications to biomedical imaging. The thesis also contributes knowledge needed to enable applications of tactile sensing in medicine, an area that has served as a key source of motivation for this work, and aims to facilitate other applications in areas such as manufacturing, robotics, and consumer electronics.

ISBN: 9781369427431Subjects--Topical Terms:

535387
Biomedical engineering.
Subjects--Index Terms:

Compliant

Soft Tactile Sensors for Mechanical Imaging.
LDR:05543nmm a2200409 4500 001 2399521
005 20240916075356.5
006 m o d
007 cr#unu||||||||
008 251215s2016 ||||||||||||||||| ||eng d
020 $a 9781369427431
035 $a (MiAaPQ)AAI10246549
035 $a (MiAaPQ)drexel:10903
035 $a AAI10246549
040 $a MiAaPQ $c MiAaPQ
100 1 $a Li, Bin. $3 834070
245 1 0 $a Soft Tactile Sensors for Mechanical Imaging.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2016
300 $a 216 p.
500 $a Source: Dissertations Abstracts International, Volume: 78-08, Section: B.
500 $a Publisher info.: Dissertation/Thesis.
500 $a Advisor: Visell, Yon;Fontecchio, Adam.
502 $a Thesis (Ph.D.)--Drexel University, 2016.
520 $a Tactile sensing aims to electronically capture physical attributes of an object via mechanical contact. It proves indispensable to many engineering tasks and systems, in areas ranging from manufacturing to medicine and autonomous robotics. Biological skin, which is highly compliant, is able to perform sensing under challenging and highly variable conditions with levels of performance that far exceed what is possible with conventional tactile sensors, which are normally fabricated with non-conforming materials. The development of stretchable, skin-like tactile sensors has, as a result, remained a longstanding goal of engineering. However, to date, artificial tactile sensors that might mimic both the mechanical and multimodal tactile sensory capabilities of biological skin remain far from realization, due to the challenges of fabricating spatially dense, mechanically robust, and compliant sensors in elastic media. Inspired by these demands, this dissertation addresses many aspects of the challenging problem of engineering skin-like electronic sensors. In the first part of the thesis, new methods for the design and fabrication of thin, highly deformable, high resolution tactile sensors are presented. The approach is based on a novel configuration of arrays of microfluidic channels embedded in thin elastomer membranes. To form electrodes, these channels are filled with a metal alloy, eutectic Gallium Indium, that remains liquid at room temperature. Using capacitance sensing techniques, this approach achieves sensing resolutions of 1 mm-1. To fabricate these devices, an efficient and robust soft lithography method is introduced, based on a single step cast. An analytical model for the performance of these devices is derived from electrostatic theory and continuum mechanics, and is demonstrated to yield excellent agreement with measured performance. This part of the investigation identified fundamental limitations, in the form of nonmonotonic behavior at low strains, that is demonstrated to generically affect solid cast soft capacitive sensors. The next part of the thesis is an investigation of new methods for designing soft tactile sensors based on multi-layer heterogeneous 3D structures that combine active layers, containing embedded liquid metal electrodes, with passive and mechanically tunable layers, containing air cavities and micropillar geometric supports. In tandem with analytical and computational modeling, these methods are demonstrated to facilitate greater control over mechanical and electronic performance. A new soft lithography fabrication method is also presented, based on the casting, alignment, and fusion of multiple functional layers in a soft polymer substrate. Measurements indicate that the resulting devices achieve excellent performance specifications, and avoid the limiting nonmonotonic behavior identified in the first part of the thesis. In order to demonstrate the practical utility of the devices, we used them to perform dynamic two-dimensional tactile imaging under distributed indentation loads. The results reflect the excellent static and dynamic performance of these devices. The final part of the thesis investigates the utility of the tactile sensing methods pursued here for imaging lumps embedded in simulated tissue. In order to facilitate real-time sensing, an electronic system for fast, array based measurement of small, sub-picofarad (pF) capacitance levels was developed. Using this system, we demonstrated that it is possible to accurately capture strain images depicting small lumps embedded in simulated tissue with either an electronic imaging system or a sensor worn on the finger, supporting the viability of wearable sensors for tactile imaging in medicine. In conclusion, this dissertation confronts many of the most vexing problems arising in the pursuit of skin-like electronic sensors, including fundamental operating principles, structural and functional electronic design, mechanical and electronic modeling, fabrication, and applications to biomedical imaging. The thesis also contributes knowledge needed to enable applications of tactile sensing in medicine, an area that has served as a key source of motivation for this work, and aims to facilitate other applications in areas such as manufacturing, robotics, and consumer electronics.
590 $a School code: 0065.
650 4 $a Biomedical engineering. $3 535387
650 4 $a Electrical engineering. $3 649834
650 4 $a Mechanical engineering. $3 649730
653 $a Compliant
653 $a Mechanical imaging
653 $a Sensor
653 $a Tactile sensing
653 $a Wearable
690 $a 0541
690 $a 0544
690 $a 0548
710 2 $a Drexel University. $b Electrical Engineering. $3 3173242
773 0 $t Dissertations Abstracts International $g 78-08B.
790 $a 0065
791 $a Ph.D.
792 $a 2016
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10246549