東華大學圖書館 |

語系: 繁體中文

說明(常見問題)

回圖書館首頁

手機版館藏查詢

登入

回首頁 到查詢結果 [ null ]

切換: 標籤 | MARC模式 | ISBD

Fundamentals of Liquid Metal Foams a...

Shah, Najam Ul Hassan.

FindBook

Google Book

Amazon

博客來

Fundamentals of Liquid Metal Foams and Emulsions.

紀錄類型:	書目-電子資源 : Monograph/item
正題名/作者:	Fundamentals of Liquid Metal Foams and Emulsions./
作者:	Shah, Najam Ul Hassan.
出版者:	Ann Arbor : ProQuest Dissertations & Theses, : 2023,
面頁冊數:	104 p.
附註:	Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
Contained By:	Dissertations Abstracts International84-11B.
標題:	Mechanical engineering. -
電子資源:	https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30309507
ISBN:	9798379524128

Fundamentals of Liquid Metal Foams and Emulsions.
Shah, Najam Ul Hassan.

Fundamentals of Liquid Metal Foams and Emulsions. - Ann Arbor : ProQuest Dissertations & Theses, 2023 - 104 p.

Source: Dissertations Abstracts International, Volume: 84-11, Section: B.

Thesis (Ph.D.)--Arizona State University, 2023.

This item must not be sold to any third party vendors.

Gallium based room-temperature liquid metals (LMs) have special properties such as metal-like high thermal conductivity while in the liquid state. They are suitable for many potential applications, including thermal interface materials, soft robotics, stretchable electronics, and biomedicine. However, their high density, high surface tension, high reactivity with other metals, and rapid oxidation restrict their applicability. This dissertation introduces two new types of materials, LM foams, and LM emulsions, that address many of these issues. The formation mechanisms, thermophysical properties, and example applications of the LM foams and emulsions are investigated.LM foams can be prepared by shear mixing the bulk LM in air using an impeller. The surface oxide layer is sheared and internalized into the bulk LM as crumpled oxide flakes during this process. After a critical amount of oxide flakes is internalized, they start to stabilize air bubbles by encapsulating and oxide-bridging. This mechanism enables the fabrication of a LM foam with improved properties and better spreadability.LM emulsions can be prepared by mixing the LM foam with a secondary liquid such as silicone oil (SO). By tuning a few factors such as viscosity of the secondary liquid, composition, and mixing duration, the thermophysical properties of the emulsion can be controlled. These emulsions have a lower density, better spreadability, and unlike the original LM and LM foam, they do not induce corrosion of other metals.LM emulsions can form by two possible mechanisms, first by the secondary liquid replacing air features in the existing foam pores (replacement mechanism) and second by creating additional liquid features within the LM foam (addition mechanism). The latter mechanism requires significant oxide growth and therefore requires presence of oxygen in the environment. The dominant mechanism can therefore be distinguished by mixing LM foam with the SO in air and oxygen-free environments. Additionally, a comprehensive analysis of foam-to-emulsion density change, multiscale imaging and surface wettability confirm that addition mechanism dominates the emulsion formation. These results provide insight into fundamental processes underlying LM foams and emulsions, and they set up a foundation for preparing LM emulsions with a wide range of fluids and controllable properties.

ISBN: 9798379524128Subjects--Topical Terms:

649730
Mechanical engineering.
Subjects--Index Terms:

Formation mechanism

Fundamentals of Liquid Metal Foams and Emulsions.
LDR:03596nmm a2200397 4500 001 2395627
005 20240517104936.5
006 m o d
007 cr#unu||||||||
008 251215s2023 ||||||||||||||||| ||eng d
020 $a 9798379524128
035 $a (MiAaPQ)AAI30309507
035 $a AAI30309507
040 $a MiAaPQ $c MiAaPQ
100 1 $a Shah, Najam Ul Hassan. $3 3765137
245 1 0 $a Fundamentals of Liquid Metal Foams and Emulsions.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2023
300 $a 104 p.
500 $a Source: Dissertations Abstracts International, Volume: 84-11, Section: B.
500 $a Advisor: Rykaczewski, Konrad;Wang, Robert.
502 $a Thesis (Ph.D.)--Arizona State University, 2023.
506 $a This item must not be sold to any third party vendors.
520 $a Gallium based room-temperature liquid metals (LMs) have special properties such as metal-like high thermal conductivity while in the liquid state. They are suitable for many potential applications, including thermal interface materials, soft robotics, stretchable electronics, and biomedicine. However, their high density, high surface tension, high reactivity with other metals, and rapid oxidation restrict their applicability. This dissertation introduces two new types of materials, LM foams, and LM emulsions, that address many of these issues. The formation mechanisms, thermophysical properties, and example applications of the LM foams and emulsions are investigated.LM foams can be prepared by shear mixing the bulk LM in air using an impeller. The surface oxide layer is sheared and internalized into the bulk LM as crumpled oxide flakes during this process. After a critical amount of oxide flakes is internalized, they start to stabilize air bubbles by encapsulating and oxide-bridging. This mechanism enables the fabrication of a LM foam with improved properties and better spreadability.LM emulsions can be prepared by mixing the LM foam with a secondary liquid such as silicone oil (SO). By tuning a few factors such as viscosity of the secondary liquid, composition, and mixing duration, the thermophysical properties of the emulsion can be controlled. These emulsions have a lower density, better spreadability, and unlike the original LM and LM foam, they do not induce corrosion of other metals.LM emulsions can form by two possible mechanisms, first by the secondary liquid replacing air features in the existing foam pores (replacement mechanism) and second by creating additional liquid features within the LM foam (addition mechanism). The latter mechanism requires significant oxide growth and therefore requires presence of oxygen in the environment. The dominant mechanism can therefore be distinguished by mixing LM foam with the SO in air and oxygen-free environments. Additionally, a comprehensive analysis of foam-to-emulsion density change, multiscale imaging and surface wettability confirm that addition mechanism dominates the emulsion formation. These results provide insight into fundamental processes underlying LM foams and emulsions, and they set up a foundation for preparing LM emulsions with a wide range of fluids and controllable properties.
590 $a School code: 0010.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Materials science. $3 543314
650 4 $a Thermodynamics. $3 517304
653 $a Formation mechanism
653 $a Gallium
653 $a Liquid metal
653 $a Thermophysics
653 $a Replacement mechanism
690 $a 0548
690 $a 0794
690 $a 0348
710 2 $a Arizona State University. $b Mechanical Engineering. $3 1675155
773 0 $t Dissertations Abstracts International $g 84-11B.
790 $a 0010
791 $a Ph.D.
792 $a 2023
793 $a English
856 4 0 $u https://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=30309507