東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back to Search results for [ null ]

Switch To: Labeled | MARC Mode | ISBD

Modeling and Experiments on Thermome...

Wang, Yunbo.

Linked to FindBook

Google Book

Amazon

博客來

Modeling and Experiments on Thermomechanics of DC Casting.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Modeling and Experiments on Thermomechanics of DC Casting./
Author:	Wang, Yunbo.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
Description:	192 p.
Notes:	Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.
Contained By:	Dissertation Abstracts International78-12B(E).
Subject:	Materials science. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10258379
ISBN:	9780355093681

Modeling and Experiments on Thermomechanics of DC Casting.
Wang, Yunbo.

Modeling and Experiments on Thermomechanics of DC Casting. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 192 p.

Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.

Thesis (Ph.D.)--Purdue University, 2017.

Direct chill (DC) casting is the major technology for manufacturing wrought aluminum alloy ingots. In this semi-continuous manufacturing process, thermal strains can cause cracks during and after solidification, leading to rejection of the ingot. Numerical simulations have been applied to study factors influencing the thermal stress development. Currently, there are two major challenges in modeling the DC casting: 1. Lack of a time-dependent constitutive behavior to describe the alloy behavior under thermal and mechanical load; 2. Scarcity of thermomechanical testing data representative of materials in genuine as-cast states.

ISBN: 9780355093681Subjects--Topical Terms:

543314
Materials science.

Modeling and Experiments on Thermomechanics of DC Casting.
LDR:03640nmm a2200337 4500 001 2159566
005 20180703084420.5
008 190424s2017 ||||||||||||||||| ||eng d
020 $a 9780355093681
035 $a (MiAaPQ)AAI10258379
035 $a (MiAaPQ)purdue:21015
035 $a AAI10258379
040 $a MiAaPQ $c MiAaPQ
100 1 $a Wang, Yunbo. $3 3347438
245 1 0 $a Modeling and Experiments on Thermomechanics of DC Casting.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 192 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.
500 $a Advisers: Matthew J.M Krane; Kevin P. Trumble.
502 $a Thesis (Ph.D.)--Purdue University, 2017.
520 $a Direct chill (DC) casting is the major technology for manufacturing wrought aluminum alloy ingots. In this semi-continuous manufacturing process, thermal strains can cause cracks during and after solidification, leading to rejection of the ingot. Numerical simulations have been applied to study factors influencing the thermal stress development. Currently, there are two major challenges in modeling the DC casting: 1. Lack of a time-dependent constitutive behavior to describe the alloy behavior under thermal and mechanical load; 2. Scarcity of thermomechanical testing data representative of materials in genuine as-cast states.
520 $a In this work, a finite element model with coupled thermal-structural simulation of DC casting process was developed as a basis to study transient stress development inside the ingot. The traditional time-independent plasticity constitutive law was firstly used in the model to study the effect of wiper position and ingot geometry. In order to address the first challenge, a time-dependent stress relaxation-based constitutive equation was developed with revitalized mechanical testing methods and numerical implementation scheme. As for the second challenge, industrial AA7050 (Al -- 6.2% Zn - 2.3% Cu -- 2.3% Mg) was remelted and cast to reproduce specimens with DC cast ingot grain size and morphology by controlling casting conditions. Stress relaxation and flow stress tests were performed on the as-cast specimens.
520 $a As a step to implement the developed stress relaxation constitutive law, simple test cases were first created to understand the different regimes in stress relaxation. After the validation using simple test cases, the stress relaxation approach was applied to the full DC casting analysis for AA7050, and the results were compared to those with plasticity approach. The two approaches agreed with each other mostly, but the stress relaxation approach was able to resolve the difference in residual stress under different cooling rates. Results showed the main distinction between the two methods is that stress keeps increasing at low temperatures (less than 100 °C) for stress relaxation approach, but is nearly a constant for plasticity approach.
520 $a In addition, the current work correlated material properties to microstructure by performing mechanical testing on both as-cast and homogenized AA7050 specimens. Eutectic microconstituent was found to play an important role, and its thermal instability causes the flip of relative strength of two specimens at different temperatures. These mechanical tests provided the mechanical data for the constitutive law in the finite element model.
590 $a School code: 0183.
650 4 $a Materials science. $3 543314
650 4 $a Mechanics. $3 525881
690 $a 0794
690 $a 0346
710 2 $a Purdue University. $b Materials Engineering. $3 1684286
773 0 $t Dissertation Abstracts International $g 78-12B(E).
790 $a 0183
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10258379