東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back to Search results for [ null ]

Switch To: Labeled | MARC Mode | ISBD

Sloped Connections and Connections w...

Mashayekh, Adel.

Linked to FindBook

Google Book

Amazon

博客來

Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames./
Author:	Mashayekh, Adel.
Published:	Ann Arbor : ProQuest Dissertations & Theses, : 2017,
Description:	256 p.
Notes:	Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.
Contained By:	Dissertation Abstracts International78-12B(E).
Subject:	Civil engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10273428
ISBN:	9780355067224

Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames.
Mashayekh, Adel.

Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames. - Ann Arbor : ProQuest Dissertations & Theses, 2017 - 256 p.

Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.

Thesis (Ph.D.)--University of California, San Diego, 2017.

Steel Special Moment Frames (SMF) are one of the most popular lateral force-resisting systems for multistory building construction in high seismic regions due to their architectural versatility. With a significant amount of research that was conducted after the 1994 Northridge, California earthquake, AISC has published design guidelines (AISC 341 and AISC 358) to avoid brittle fracture of beam-to-column welded moment connections that occurred in more than 100 steel buildings. This dissertation addresses two issues related to the moment connection design of SMF.

ISBN: 9780355067224Subjects--Topical Terms:

860360
Civil engineering.

Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames.
LDR:03398nmm a2200325 4500 001 2125910
005 20171113103034.5
008 180830s2017 ||||||||||||||||| ||eng d
020 $a 9780355067224
035 $a (MiAaPQ)AAI10273428
035 $a AAI10273428
040 $a MiAaPQ $c MiAaPQ
100 1 $a Mashayekh, Adel. $3 3287995
245 1 0 $a Sloped Connections and Connections with Fillet Welded Continuity Plates for Seismic Design of Special Moment Frames.
260 1 $a Ann Arbor : $b ProQuest Dissertations & Theses, $c 2017
300 $a 256 p.
500 $a Source: Dissertation Abstracts International, Volume: 78-12(E), Section: B.
500 $a Adviser: Chia-Ming Uang.
502 $a Thesis (Ph.D.)--University of California, San Diego, 2017.
520 $a Steel Special Moment Frames (SMF) are one of the most popular lateral force-resisting systems for multistory building construction in high seismic regions due to their architectural versatility. With a significant amount of research that was conducted after the 1994 Northridge, California earthquake, AISC has published design guidelines (AISC 341 and AISC 358) to avoid brittle fracture of beam-to-column welded moment connections that occurred in more than 100 steel buildings. This dissertation addresses two issues related to the moment connection design of SMF.
520 $a Unless the column flanges are sufficiently thick, AISC 341 requires that continuity plates be installed, and that expensive complete-joint-penetration (CJP) groove welds be used to connect the continuity plates to the column flanges; the conservative nature of this requirement stems from a lack of procedure that the designer can use to quantify the required seismic forces in the continuity plates such that more economical welds (e.g., fillet welds) can be used. The first objective of this research was to investigate a design procedure and to verify it with full-scale testing of two Reduced Beam Section (RBS) moment connections. It was shown that the proposed design procedure could result in a more economical weld design while developing the ductile response of the moment connection.
520 $a AISC seismic design codes implicitly assume that beams are orthogonal to the columns in elevation, but in real-life construction beams are sometimes connected to the columns with a slope. To fill this knowledge gap, both experimental and analytical studies were conducted. Full-scale testing of two additional moment connections with a 25° angle of inclination showed that sloped connections are vulnerable to brittle fracture at the "heel" location, where the beam flange and column form an acute angle. Fracture would initiate from the end of beam web CJP weld and the weld access hole. Guided by finite element simulation, a truss analogy model was proposed to predict the force concentration at the heel location. A Force Concentration Factor was introduced to evaluate when the effect of inclination can be ignored. When such effect needs to be addressed, a solution that introduces a curved slot in the beam web was proposed. The effectiveness of this solution was verified by nonlinear finite element analysis.
590 $a School code: 0033.
650 4 $a Civil engineering. $3 860360
650 4 $a Architectural engineering. $3 3174102
650 4 $a Geophysical engineering. $3 3175813
690 $a 0543
690 $a 0462
690 $a 0467
710 2 $a University of California, San Diego. $b Structural Engineering. $3 1020656
773 0 $t Dissertation Abstracts International $g 78-12B(E).
790 $a 0033
791 $a Ph.D.
792 $a 2017
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=10273428