東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back to Search results for [ null ]

Switch To: Labeled | MARC Mode | ISBD

Finite element analysis of a hydraul...

Palmer, Matt.

Linked to FindBook

Google Book

Amazon

博客來

Finite element analysis of a hydraulic snubber with respect to historical test data and American Society of Mechanical Engineers requirements.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Finite element analysis of a hydraulic snubber with respect to historical test data and American Society of Mechanical Engineers requirements./
Author:	Palmer, Matt.
Description:	88 p.
Notes:	Source: Masters Abstracts International, Volume: 54-02.
Contained By:	Masters Abstracts International54-02(E).
Subject:	Mechanical engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1571093
ISBN:	9781321406528

Finite element analysis of a hydraulic snubber with respect to historical test data and American Society of Mechanical Engineers requirements.
Palmer, Matt.

Finite element analysis of a hydraulic snubber with respect to historical test data and American Society of Mechanical Engineers requirements. - 88 p.

Source: Masters Abstracts International, Volume: 54-02.

Thesis (M.S.)--University of Rhode Island, 2015.

This item is not available from ProQuest Dissertations & Theses.

Hydraulic snubbers are either acceleration or velocity limiting seismic restraints designed to restrict movement of piping or equipment during dynamic events or operational transients. In a piping analysis, snubbers are modeled as linear elastic spring elements governed by Hooke's law, F = kx. Snubbers are widely used in nuclear power plants, and as such their qualification testing to verify the spring constant k is governed by American Society of Mechanical Engineers (ASME) codes. ASME mandates experimental determination of spring constant k where practical, or a combination of testing and analysis when not practical. This qualification test includes testing at full load under a sinusoidal forcing function at a maximum frequency of 33 Hz.

ISBN: 9781321406528Subjects--Topical Terms:

649730
Mechanical engineering.

Finite element analysis of a hydraulic snubber with respect to historical test data and American Society of Mechanical Engineers requirements.
LDR:03593nmm a2200325 4500 001 2069128
005 20160510114949.5
008 170521s2015 ||||||||||||||||| ||eng d
020 $a 9781321406528
035 $a (MiAaPQ)AAI1571093
035 $a AAI1571093
040 $a MiAaPQ $c MiAaPQ
100 1 $a Palmer, Matt. $3 3184122
245 1 0 $a Finite element analysis of a hydraulic snubber with respect to historical test data and American Society of Mechanical Engineers requirements.
300 $a 88 p.
500 $a Source: Masters Abstracts International, Volume: 54-02.
500 $a Adviser: David Taggart.
502 $a Thesis (M.S.)--University of Rhode Island, 2015.
506 $a This item is not available from ProQuest Dissertations & Theses.
520 $a Hydraulic snubbers are either acceleration or velocity limiting seismic restraints designed to restrict movement of piping or equipment during dynamic events or operational transients. In a piping analysis, snubbers are modeled as linear elastic spring elements governed by Hooke's law, F = kx. Snubbers are widely used in nuclear power plants, and as such their qualification testing to verify the spring constant k is governed by American Society of Mechanical Engineers (ASME) codes. ASME mandates experimental determination of spring constant k where practical, or a combination of testing and analysis when not practical. This qualification test includes testing at full load under a sinusoidal forcing function at a maximum frequency of 33 Hz.
520 $a There remains a practical upper limit to dynamic testing that is imposed by the availability of test equipment. This upper limit is governed by the size of the hydraulic pumps and servo actuators supplying fluid to the actuating test cylinder. At current writing, this limit is approximately 200 kips 33 Hz. New reactor designs have applications for snubbers with load capacities up to 1,900 kips. Functional testing can be conducted on these large units to verify the lockup and bleed parameters are correct, as well as the load carrying capacity. However, the dynamic spring rate of the snubber will not be experimentally verified at full rated load.
520 $a This study developed an FEA model of a hydraulic snubber that was compared to existing ASME qualification test data performed by Anvil Engineered Pipe Supports (EPS). If an accurate model can be developed for smaller snubber sizes, it can be used to determine the spring rate of units that exceed the capacity of existing test equipment.
520 $a The experimental test data shows a spring constant that decreases at an approximately linear rate between 3 Hz and 33 Hz, with a reduction at higher frequencies of approximately 30%. The simulation models linear elastic behavior, and shows up to a 6% reduction between 3 Hz and 33 Hz. Part of the discrepancy can be explained by the load controlled nature of the test negating inertial effects, and increased deflections due to lost motion caused by assembly clearances and manufacturing tolerances. Further testing should be conducted, measuring load through pressure transducers in the cylinder fill ports to overcome these test setup limitations. This testing should be done on at reduced load so that a model can be developed that agrees with both the reduced load testing and rated/emergency load testing.
590 $a School code: 0186.
650 4 $a Mechanical engineering. $3 649730
650 4 $a Plasma physics. $3 3175417
690 $a 0548
690 $a 0759
710 2 $a University of Rhode Island. $b Mechanical Engineering and Applied Mechanics. $3 2101162
773 0 $t Masters Abstracts International $g 54-02(E).
790 $a 0186
791 $a M.S.
792 $a 2015
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=1571093