東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back to Search results for [ null ]

Switch To: Labeled | MARC Mode | ISBD

Modeling of photovoltaic thermal sys...

Li, Siwei.

Linked to FindBook

Google Book

Amazon

博客來

Modeling of photovoltaic thermal systems with transpired solar collectors integrated in building operation simulation.

Record Type:	Electronic resources : Monograph/item
Title/Author:	Modeling of photovoltaic thermal systems with transpired solar collectors integrated in building operation simulation./
Author:	Li, Siwei.
Description:	198 p.
Notes:	Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
Contained By:	Dissertation Abstracts International76-02B(E).
Subject:	Civil engineering. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636341
ISBN:	9781321179187

Modeling of photovoltaic thermal systems with transpired solar collectors integrated in building operation simulation.
Li, Siwei.

Modeling of photovoltaic thermal systems with transpired solar collectors integrated in building operation simulation. - 198 p.

Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.

Thesis (Ph.D.)--Purdue University, 2014.

Solar energy is so far the most promising and sustainable alternative energy source to fossil fuels. The new solar technology proposed in this research, building-integrated photovoltaic-thermal (BIPV/T) systems, can be attached to the facade or replace conventional cladding, enabling on-site generation of solar electricity and heat, which can fulfill a significant portion of the building energy requirements.

ISBN: 9781321179187Subjects--Topical Terms:

860360
Civil engineering.

Modeling of photovoltaic thermal systems with transpired solar collectors integrated in building operation simulation.
LDR:05125nmm a2200325 4500 001 2064218
005 20151109142629.5
008 170521s2014 ||||||||||||||||| ||eng d
020 $a 9781321179187
035 $a (MiAaPQ)AAI3636341
035 $a AAI3636341
040 $a MiAaPQ $c MiAaPQ
100 1 $a Li, Siwei. $3 3178780
245 1 0 $a Modeling of photovoltaic thermal systems with transpired solar collectors integrated in building operation simulation.
300 $a 198 p.
500 $a Source: Dissertation Abstracts International, Volume: 76-02(E), Section: B.
500 $a Adviser: Panagiota Karava.
502 $a Thesis (Ph.D.)--Purdue University, 2014.
520 $a Solar energy is so far the most promising and sustainable alternative energy source to fossil fuels. The new solar technology proposed in this research, building-integrated photovoltaic-thermal (BIPV/T) systems, can be attached to the facade or replace conventional cladding, enabling on-site generation of solar electricity and heat, which can fulfill a significant portion of the building energy requirements.
520 $a High-resolution, three-dimensional Computational Fluid Dynamics (CFD) models are developed to investigate the complex airflow and heat transfer mechanisms in BIPV/T systems and provide a solid foundation that supports the formulation of thermal analysis models. The CFD models are validated using data from an experimental set-up in a state-of-the-art solar simulator facility, in terms of the cavity exit air temperature (the error less than 1°C), the stream-wise development of plate surface temperature (the error less than 1°C), and vertical profiles of stream-wise velocity (average error within 10 %) and turbulent kinetic energy (average error within 20 %).
520 $a Energy prediction models for both corrugated UTCs and UTCs integrated with BIPV/T systems are established to evaluate their performance (electrical and thermal energy output, outlet air temperature, etc.) for different weather (incident solar radiation and wind speed) and system design parameters (corrugation geometry, PV module coverage ratio, suction velocity, etc.). Comprehensive Nusselt number and effectiveness correlations, representing both the exterior and interior convective heat transfer processes in BIPV/T systems, are obtained from the CFD simulations and subsequently used in the energy models. Experimental data for prototype BIPV/T collectors installed at Purdue's Architectural Engineering Lab are used to validate the energy models. Comparison between the model predictions and the experimental data verifies the dynamic response of the collectors to weather and operating conditions, with the root mean square error within 1 °C in terms of cavity exit air temperature for the UTC configuration and within 2 °C (PV surface temperature) for the model of UTC with PV modules. The methodology for the analysis of the thermal boundary layer development and convective heat transfer process can be generalized to uniform approaching flow over corrugated plates with discrete suction, while the Nusselt number and effectiveness correlations and the physical modeling approach can be adopted to other BIPV/T systems.
520 $a Then the energy models are implemented in building simulation platforms to enable integration of BIPV/T with building HVAC systems (air handling unit and radiant floor heating) and active thermal storage systems. Finally, a deterministic model-predictive control algorithm is formulated for the integrated solar system. This includes building up a detailed dynamic system model in TRNSYS, presenting a system identification approach to obtain simplified gray and black-box models that capture the relevant system dynamics and are computationally efficient for implementation in real controllers, formulating the cost function and setting up the constraints and the optimization environment, and examining the potential impacts associated with the prediction accuracy of the solar irradiance, which is the most significant disturbance acting on the system. The energy saving potential of the integrated system and the predictive controller is investigated in comparison with baseline operation strategies used in commercial buildings, using the Hydronic Laboratory at Purdue's Living Laboratories as a simulation test-bed. The investigation shows that efficient integration concepts and optimal control strategies are necessary to predict and plan the energy cost for the integrated solar system, resulting in total energy savings for the integrated solar system that can be up to 45 %. The modeling representations and approaches developed in this study can be generalized and extended to other commercial buildings with different integrated solar systems, HVAC systems and energy storage. (Abstract shortened by UMI.).
590 $a School code: 0183.
650 4 $a Civil engineering. $3 860360
650 4 $a Architectural engineering. $3 3174102
650 4 $a Alternative Energy. $3 1035473
690 $a 0543
690 $a 0462
690 $a 0363
710 2 $a Purdue University. $b Civil Engineering. $3 1020862
773 0 $t Dissertation Abstracts International $g 76-02B(E).
790 $a 0183
791 $a Ph.D.
792 $a 2014
793 $a English
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3636341