東華大學圖書館 |

Language: English

Help

回圖書館首頁

手機版館藏查詢

Back to Search results for [ null ]

Switch To: Labeled | MARC Mode | ISBD

High numerical aperture injection-mo...

Chidley, Matthew Douglas.

Linked to FindBook

Google Book

Amazon

博客來

High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy.

Record Type:	Electronic resources : Monograph/item
Title/Author:	High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy./
Author:	Chidley, Matthew Douglas.
Description:	283 p.
Notes:	Source: Dissertation Abstracts International, Volume: 66-09, Section: B, page: 4881.
Contained By:	Dissertation Abstracts International66-09B.
Subject:	Physics, Optics. -
Online resource:	http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3190587
ISBN:	9780542330827

High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy.
Chidley, Matthew Douglas.

High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy. - 283 p.

Source: Dissertation Abstracts International, Volume: 66-09, Section: B, page: 4881.

Thesis (Ph.D.)--The University of Arizona, 2005.

This dissertation presents the design of a miniature injection-molded objective lens for a fiber-optic confocal reflectance microscope. This is part of an effort to demonstrate the ability to fabricate low cost, high performance biomedical optics for high resolution in vivo imaging. Disposable endoscopic microscope objectives could help in vivo confocal microscopy technology mature to enable large-scale clinical screening and detection of early cancers and pre-cancerous lesions. This five lens plastic objective has been tested as a stand-alone optical system and has been coupled to a confocal microscope for in vivo imaging of cells and tissue. Changing the spacing and rotation of the individual optical elements can compensate for fabrication inaccuracies and improve performance. An optical-bench testing system was constructed to allow interactive alignment during testing. The modulation transfer function (MTF) of the miniature objective lens is determined using the slanted-edge method. A custom MATLAB program, edgeMTF, was written to collect, analyze, and record test data. An estimated Strehl ratio of 0.64 and an MTF value of 0.70, at the fiber-optic bundle Nyquist frequency, have been obtained. The main performance limitations of the miniature objective are mechanical alignment and flow-induced birefringence. Annealing and experimental injection molding runs were conducted in effort to reduce birefringence.

ISBN: 9780542330827Subjects--Topical Terms:

1018756
Physics, Optics.

High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy.
LDR:02362nmm 2200277 4500 001 1827689
005 20070102084735.5
008 130610s2005 eng d
020 $a 9780542330827
035 $a (UnM)AAI3190587
035 $a AAI3190587
040 $a UnM $c UnM
100 1 $a Chidley, Matthew Douglas. $3 1916614
245 1 0 $a High numerical aperture injection-molded miniature objective for fiber-optic confocal reflectance microscopy.
300 $a 283 p.
500 $a Source: Dissertation Abstracts International, Volume: 66-09, Section: B, page: 4881.
500 $a Adviser: Michael R. Descour.
502 $a Thesis (Ph.D.)--The University of Arizona, 2005.
520 $a This dissertation presents the design of a miniature injection-molded objective lens for a fiber-optic confocal reflectance microscope. This is part of an effort to demonstrate the ability to fabricate low cost, high performance biomedical optics for high resolution in vivo imaging. Disposable endoscopic microscope objectives could help in vivo confocal microscopy technology mature to enable large-scale clinical screening and detection of early cancers and pre-cancerous lesions. This five lens plastic objective has been tested as a stand-alone optical system and has been coupled to a confocal microscope for in vivo imaging of cells and tissue. Changing the spacing and rotation of the individual optical elements can compensate for fabrication inaccuracies and improve performance. An optical-bench testing system was constructed to allow interactive alignment during testing. The modulation transfer function (MTF) of the miniature objective lens is determined using the slanted-edge method. A custom MATLAB program, edgeMTF, was written to collect, analyze, and record test data. An estimated Strehl ratio of 0.64 and an MTF value of 0.70, at the fiber-optic bundle Nyquist frequency, have been obtained. The main performance limitations of the miniature objective are mechanical alignment and flow-induced birefringence. Annealing and experimental injection molding runs were conducted in effort to reduce birefringence.
590 $a School code: 0009.
650 4 $a Physics, Optics. $3 1018756
650 4 $a Plastics Technology. $3 1023683
690 $a 0752
690 $a 0795
710 2 0 $a The University of Arizona. $3 1017508
773 0 $t Dissertation Abstracts International $g 66-09B.
790 1 0 $a Descour, Michael R., $e advisor
790 $a 0009
791 $a Ph.D.
792 $a 2005
856 4 0 $u http://pqdd.sinica.edu.tw/twdaoapp/servlet/advanced?query=3190587